REPAIRS / MAINTENANCE TO SEWAGE LINES, MANHOLE, SEPTIC TANK, AREA DRAINAGE AND PAVED AREA IN ZONE A AREA OF AGE B/R-I (C) UNDER GE (CENTRAL) KHADKI.

Amount

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.

Cleaning and clearing of bore underground Main sewage line/Branch sewer line from any type of trap including (WCs /Gully trap /floor trap/CI pipes /nahani Trap/Bathrooms) to 1st manhole including trap & manhole of any depth by taking off manhole covers and re-fixing the same after cleaning of any descripton , underground and any depth by removing any type of blockage including de-silting and de-chocking sludge/sludge water shall be disposed off by using mechanically or pumping out sewage from block manholes where authorised dumping site declared by local adminstration outside MoD land distance exceeding 2Km but n, exc 2.5 Km complete all as specifed and as directed. Contd to 3

Contd from,,..2 NOTE : - (i) The contractor shall deploy Minimum, experienced 02 safaiwala & 02 helper (Total 04 people) alongwith T & P (i.e Iron seweage line cleaning Rod set -02 Nos, Kassi, Genti, Crow bar, safety hand gloves, safety shoes and other tools for all members on regular basis to attend complaint cell/service centre of AGE B/R-I under GE (C) Kirkee area daily between 0830 to 0900 hrs as per direction of Engr-in-Charge. (ii) The complaint shall be attended preferably on the same day and complaint slips duly signed by the user will be deposited back with JE (Civil) on the same day. (iii) Working time for all the people employed by the contractor will be from 0900 hrs to 1700hrs in case of any emergency, they can be called at any time beyond specifed time and will be given off at the descretion of Engr-in-Charge. (iv) A penalty of Rs. 629/- per day per person will be levied in case of absence of any of safaiwala or helper. (v) Manpower /employees deployed by contractor shall have safety measures for the job and life insurance policy for compensation in case of any accident. The cost for the same is deemed to be included in the unit quoted rate by the bidder. No extra claim will be entertained by the Department. (vi) The payment towards the subject items shall only be made as per the total number of days, contractor had cleaned and cleared the blockages of sewage line. (vii) Contractor shall maintain a register including details of day of cleaning of sewage line, duly signed by contractor and Engineer-in-Charge or his Rep.

Cleaning by using mechanical equipement of solid/liquid mud/any type of solid content including mud, brick bats, empty containers of any type, rags, polythene or any similar items deposited in underground sewage lines depth upto 5 mtr including manholes/inspection chamber of any size at any depth (STP and main lines from pumping station of any dia) in entire area at Zone A under the premises of AGE B/R-I (C) Kirkee by using SUPER SUCTION MACHINE TRUCK MOUNTED HAVING SUCTION CAPACITY 1000 TO 4000 CUM/HRS, JETTING PUMP WITH WORKING PRESSURE AT NOT LESS THAN 120 BAR having facilities of high pressure water thermoplastic fibre braided water jetting hose and through conical/round shape nozzle pipe. Bottom surface of manhole/inspection chamber & sewage lines should be visible after cleaning process. Sludge/sludge water/any type of waste recovered from sewage lines/manhole/inspection chambers shall be disposed off at authorised dumping site declared by local adminstration outside MoD land distance exceeing 2Km but n, exc 2.5Km etc complete all as specifed and as directed. Contd to 5

Contd from,,..4 NOTE :- (i) All T & P should be arraged by contractor and deemed to include in his quoted rate. (ii) Lines once cleared will be maintained through out the period of the contract, if there is any blockage during the period of the contract, the same will be cleared without any extra cost by the contractor. (iii) In case of any blockage is observed /found in any cleared line through super suction machine during the time period of contract and it becomes necessary to clear the sewage line with machine, the same shall be cleared through machine by the contractor without any extra cost to the department. The line shall be cleared by the contractor within 48hrs after intimation to the contractor. The rate quoted by the contractor against item No 02 above shall be deemed to be inclusive of clearance of line twice time as required during the whole contract period.

Cleaning of existing septic tank of 500 users capacity by using Mechanical Pumping Machine to removing water, sludge, stones, solid particles etc complete from the septic tank at any location and at distance from road and removing the same from the campus and buried complete all as specified and as directed as below: (i) The sludge/burried soil etc taken out shall be stacked alongwith the septic tank, sump well etc. After 48 hours of the sludge taken out, measurement shall be taken as of the solid contents for the purpose of payment. The tenderer are advised to keep this aspect in mind while quotating the rates. After taking the measurements, the solid contents shall be disposed off outside the Md land/area. (ii) Necessary precautions as well as safety measures shall be taken by the contractor without any extra cost, for working in the foul conditions. (iii) The contractor shall be entirely responsible for the lapse, mishappening to any of the manpower deployed and/or to other equipment/machinary/material at the site of work during the execution.

Description all as specified in item No 06 above but septic tank for 200 users.

Description all as specified in item No 06 above but septic tank for 10 to 100 users.

Excavating over areas n. exc 1.5 m deep and getting out soft/loose soil etc complete all as specifed and as directed.

Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n. exc 10 Sqm on plan and n. exc 1.5m in depth and getting out in hard dense soil/ hard rock complete all as specified and as directed.

Description all as per item Sr No-10 above but depth exc 1.5m but n. exc 3.00m etc.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25cm in hard dense soil/hard rock in excavated pit or trenches complete all as specified and as directed.

Removing excavated spoil/ material to a distance exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed.

Demolition and breaking up 150mm/200mm drain pipes (salt glazed ware AC/RCC) drain pipes including PCC haunching and bedding jointed in cement mortar and taking out including removing outside the defence land complete all as specied and as direced.

Material and labour for reinforced concrete pipes, 150 mm bore of pipe, Class NP-2, laid and jointed complete with collars complete all as specified and as directed.

Material and labour for reinforced concrete pipes, 200 mm bore of pipe, Class NP-2, laid and jointed complete with collars complete all as specified and as directed.

Material and labour plain cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under & haunching against sided of pipes after they are laid and tested for 150mm complete all as specifed and as directed.

Material and labour plain cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under & haunching against sided of pipes after they are laid and tested for 200mm complete all as specifed and as directed.

Cutting into existing manholes for connecting new drain pipe, making to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm/200mm bore pipe complete all as specifed and as directed.

Demolition of brick work built in cement mortar in any position and in any location complete all as specifed and as directed

Material and labour brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 in any position, complete all as specifed and as directed.

Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding, ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding, ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely

Supply only liquid water proofing compound complete etc all as specified and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint at any height including necessary scaffolding ladder etc complete all as specifed and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of oil bond distemper of alkali resistant primer at any height including necessary scaffolding ladder etc complete all as specifed and as directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilate demolition) etc complete all as specifed and as directed.

Material and labour for TMT bars 6 mm to 8 mm dia and over and cut to length, bend to shape required including cranking, bending spirally for hoping for columns, RCC cover slab hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Material and labour for providing, precast cement concrete (1:2:4) type B-1 (20mm graded aggregate) set in CM (1:4) in landing, cover slab (for manhole etc) chullah hoods, chajja, water trough, mangers, shelves and similar articles with plane face including formwork etc complete all as specifed and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40mm graded aggregate) as in foundation, filling and mass concrete and subbase complete all as specifed and as directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) in surface channel for drain/manhole etc complete all as specifed and as directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching, kerb, bed plated, coping etc including formwork complete all as specifed and as directed.

Supply and fix 100mm bore cast iron soil waste and vent pipe, sand cast pipes in any length with or without ears jointed with cement mortar (1:3) laid in trenches or in floors or on wall fixed including taking down existing pipes complete all as specifed and as directed.

Description all as per SI item 34 above but 75mm bore.

Supply and fix in repair 100mm cast iron bends etc complete all as specifed and as directed.

Description all as per SI item 36 above but 75mm bore.

Supply and fix stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including nuts & bolts for securing ends of stay to wall for 100mm bore CI pipes complete all as specifed and as directed.

Description all as per SI item 38 above but 75mm bore.

Material and labour vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm (23" approx) white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, all as per Prayag Cat Part No 4055 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repair complete all as specified and as directed.

Material and labour vitreous china wash down water closet pan (EWC), white (excluding fixing bolts, flushing cistern and flush pipe) all as per Prayag cat Part No.4018 or 4019 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified.

Supply and fix in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specifed and as directed.

Supply and fix vitreous china urinal half stall size 345x320x560 mm wall mounted (minimum), with Waste coupling of CP, (excluding flushing cistern, flush pipe and waste pipe) including fitting of push cock with exting GI Tubing all as per Prayag Cat No 4998 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix PVC valveless, syphonic action type, Smart flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per Prayag cat Part No.501 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified and as directed.

Supply and fix in repair 32 mm bore and 800mm long PVC waste pipe suitable for WHB, Urinals etc all as per Prayag Cat No 3271 or technocommercially equivalent make complete all as specified and as directed.

Supply and fix in repair PVC symphon with complete set any type/any size as per site requirement) for low level PVC cistern of 10 Ltr capacity as per sample complete all as specifed and as directed.

Supply and fix in repair PVC flush pipe/Bend (long/short) for low level PVC flushing cistern 40mm bore etc complete all as specifed and as directed.

Supply and fix in repair 15mm bore stop valve, chromium plated fancy type with crutch or butterfly handle screwed down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as per Prayag Cat Part No 8326/8328 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix angle cock, 15mm dia, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screw down, screwed both ends for iron pipe or for brass ferrule all as per Prayag Cat No 8310 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 8306 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as per Prayag Cat No 323-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 600mm long all as per Prayag Cat No 324-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 900mm long all as per Prayag Cat No 326-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as per Prayag Cat No 113 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix in repair 2 in 1 health faucet (1.00 metre braided tube) with ABS wall hook all as per Prayag Cat Part No.BEA-100-S or techno commercially equivalent makes specified in PS, with 1 meter SS Braided connection pipe complete all as specified and as directed.

Supply and fix in repair pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia pipe complete all as per Prayag Cat Part No 8304 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repair vitreous china one piece wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and as directed. MAKE :- Prayag Cat Part No 4645 or techno commercially equivalent makes specified in PS

Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix in repairs for 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor etc complete all as specifed and as directed.

Supply and fix in repairs 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced.

Supply and fix in repairs PVC floor trap 75mm complete all as specifed and as directed.

Supply and fix in repairs for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall etc complete all as specifed and as directed.

Supply and fix in repairs for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specifed and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specifed and as directed.

Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.

Supply and fix in repair rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.

Material and labour non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x7mm /300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed. MAKE :- SOMANY (ELOGIO LIGHT, GLOSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour excavation /desludging /desilting as in liquid/dry mud/foul condition of any depth and cross section width 0.50m to 1.20m getting out from existing drain and cleaning the shrubs/grass from sides of drain including removing existing RCC cover slab of any size and any thickness and resetting in the position and removing the sludge outside the defence land in covered container complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specifed and as directed.

Material and labour for plain cement concrete (1:2:4) type B-2, 100mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement and making joints filling with bitumen sand mastic including necessary formwork complete all as specifed and as directed.

Material and labour for chequered cement concrete rubber moulded coloured tiles 300mm x 300mm x 25mm thick, set jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed of cement mortar (1:4) including pointing with white cement with pigment to match the shade of tiles including dismantling of existing tiles and removing the debris outside the defence land complete all as specifed and as directed.

Material and labour for PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof kerb or mud stop, rounded or chamferred on edge complete all as specifed and as directed.

Material and labour for rubber moulded coloured (Red, Yellow & Black) precast concrete interlocking paver blocks with grey cement and pigment any shape and size, shade as approved by GE, 60mm thick conforming to IS 15658-2006 M-35 grade and interstices filled with sand over and including 40mm thick sand cushion and including dismantling of existing tiles and removal outside the MoD land complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removing the debris outside defence land complete all as specifed and as directed.

Material and labour for filling broken brick bats not exc 63mm as in sunken portion including grouting in CM (1:6) complete all as specified and directed.

Material and labour for water proofing treatment to sunken floor with the following course of treatment/ specification: (a) First layer of slurry of cement at the rate of 0.488 kg/sqm mixed with acrylic based polymer, modified cementitous composite compound at the rate 0.253 kg/sqm. This layer will be allowed to air cure for 04 hours. (b) Second layer of slurry of cement at the rate of 0.242Kg/Sqm mixed with cementitous composite compound at the rate of 0.126 Kg/sqm. This layer will be allowed to air cure for 04 hours followed with water curing for 48 hours. (c) The rate include aration of surface, treatment and sealing of all joints, corners, junctions of pipe and masonry within polymer mixed slurry. (d) This statement shall be provided after provision of cement plaster mixed with WPC and synthetic fibres while concrete is still green. (e) 200 micron thick polythene film pasted with the help of adhesive shall be provided over above treatment.

Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in flooring finishing the cement finished rough complete all as specified and as directed.

Material and labour 50mm thick PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) finished even & smooth using extra cement complete all as specified and as directed.

Material and labour for complete removal of existing treatement/old plasterd/concrete surface from internal surface of wall by using wire brushes & stopping of surface & levelling /edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty to obtain regular/even finish using sand paper and applying two coat of oil bond distemper upto height 10 mtr etc complete all as specifed and as directed.

Supply and fix in repair center hole basin mixer chromium plated Hot and cold with copper pipe complete all as specife and as directed. MAKE:- Prayag Cat Part No 7250 Viva series or techno commercially equivalent makes specified in PS

Supply and fix in repair CP Wall mixer telephonic with crutch with (Provision for hand shower), with complete accessories all as per Cat Part No PIS-70H of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 500x125mm with chromium plated brass bracket all as per Cat Part No BEA-45 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

V.R.PRAJAPATI AND CO.

S.R.M.K Enterprises

MAHESH DADAJI BACHHAV

DARSHAN ENTERPRISES

S M MISHRA

Shri Sant Cosntruction