Road improvement work from Fortune Hotel to Guldhar Cut in Sanjay Nagar under Kavi Nagar Zone area.

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Scraping old painted surface including disposal of all scraped material to a distance of 30 meters (100 ft.) as directed by Enginer­ in-charge. (by machnical)

Providing laying spreading and compecting graded stone aggregate to wet mix macadam specification including premixing the material with at OMC in machenical mix plant carriage of mix material by tipper to site laying in uniform layers of each 100mm thick with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Construction of un-reinforced, dowl jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 40(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine. Technical Specification Clause 1501 ( SOR 2022/20.12)

providing and laying microaurfacing course compriaing of dry fine aggregate conforming to type -iii grading polymer modified/ latex modified bitumen emulsion fillir ( ordinary portland cement ) chemical additive and water as per IRC:SP:81-2008: over a previously prepared surface.

S/L Hot applied Thermo Plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thick ness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. the finished surface to be level uniform and free from streak and holes. rates all including of all taxes royality vat etc all t & p /machine material and lobour required for proper complition of work.

Reflective Raised pavement marker providing and fixing of raised pavment markers (cat eye) type x ASTMD - 4956-04 avery dennission /3m (USA make) having moulded body of polycabonate ASA, HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirement mentioned in MoRT&H circular its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light ), electronically welded to the body. The length, height and wiedth of the body shall not exceed 130mm 20mm, and 105mm respectively, The area of each reflective surface shall not be less than 13 Sq. cm. on each side stoping at the angle of 35+5 degree to the base to ensure maximum reflectively. it shall comply to specification of category A of MoRT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate corforming to ASTMD 788 or equivalent. with 7 years warranty. Rate shall be inclusive of all taxes, royalty, VAT etc. All T&P machine and labour required for proper completion of work.Note: The composite warranty jointly signed by original manufacturer & authorized converter of at l

Providing wall putty on old surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats.AS PER PWD SOR 2022 662 NEW ITEM .

Finishing wall with weather coat by premium acrylic exterior paint applie of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer of approved brand and manufacturer exterior primer applied @ 2.20kg/10 sqm after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work..AS PER PWD SOR 2022 662 NEW ITEM .

M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.PWD SOR 2022 10.21 .