REPAIR /MAINT OF WALKING PATH , STROM DRAINAGE AND LAND SCAPING SYSTEM IN VARIOUS ZONE AT TALBEHAT MIL STN

Amount

Taking down cement or lime plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for Rendering 15mm in CM 1:4 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 20mm graded stone aggregate) 100mm thick as in sub bases/ floors all as specified and directed.

Machine pressed precast concrete interlocking paver block with grey cement pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade of approved quality,laid over and include 50mm thick sand cushion vibtrated with mecanical vibrator complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block with grey cement pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M- 40 Grade of approved quality,laid over and include 50mm thick sand cushion vibtrated with mecanical vibrator complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm / 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars and laid in trenches complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

Demolition of brick work or stone / boulder masonary,built in cement mortar incl all quoins , pillars etc complete all as specified and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Material & Labour for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

Material & Labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, compelte all as specified and as directed.

All as per item No 12 above but except bricks, complete all as specified and as directed.

M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in band,beam,benching of drain,man hole,coping,slightly rounded or chamfered angles and throating,and similar work including necessary form work all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles. and removing debris out of MD land all as specified and directed.

M&L for exterior wall tiles 6 to 8 mm thick area exceeding 0.06 sqm but not exceeding 0.18 sqm each tiles etc set & jointed in cement and pointed in coloured cement to match the shade of tile and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified & directed.

Material and Labour for heavy duty outdoor vitrified tiles dark or light shade 12 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. Make: Johnson tiles / Kajaria /Somany/ Orient Bell, approved sample as kept in AGE (I) Office.

Material and Labour for glass mossaic tiles on finished plain wall or floor surfaces of size 200mm x 200mm x 4mm in all colour, design, fixing in customize design with the help of approved adhesive all as per direction of Engineer in charge.

M & L for 3mm thickness fibre glass reinforced translucent plain sheeting 100mm swide lap fixed with coach screw and washer in wall etc complete

Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid / bedded and pointed in any mortar.

M & L for 20mm thick granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

Moulding as In edge of granite platform complete all as specified & directed.

S&F for polymeric HDPE LED Kerb stone of size 50 cm x 20 cm x 15 cm joint in cement mortar (1:6 ) and struck flush including load carry capacity 800 kg LED strip length 465 mm operational voltage reqd 36 volts with 2 nos connectors (1 male 1 female) and 5 N0 foundation rods dismentling of old PCC kerb stone coloured of kerb stone approved by GE complete all as specified and directed.

S&F for SMPS LED Kerb stone driver output 9.7 a, 36 v with 16 A double pole MCB and junction box (brand Sintex) complete all as specified and directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal complete and all as specified and directed.

S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified.

S&F factory made precast RCC drain cover of size 900 mm x 600 mm x 100 mm thick and fixed to drain in CM (1:4) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L for stainless steel grade 304 (square/round/rectangular) of suitable gauge as in guard bars / railing / frame work including all fixing arrangement including taking down of old any type railing complete all as specified and directed.

Supply and fixing MS angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as in posts to fencing / cattle traps or covering to drains etc fixed in position conforming to Fe-410 (Gde E-250) (quality-A), complete all as specified and directed.

Material and Labour for two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and and applying two coats of weather proof acrylic exterior paint (100% Acrylic) (Apex Ultima protek, Make : Asian Paints) through authorized applicator only complete all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints as approved by GE complete all as specified and directed.

M & L for applying 2 coats of oil bound distemper over a coat of primer on new or previously untreated surfaces of wall including preparation of surfaces all as specified and as directed.

M&L for applying 2 coats of cement base paint in any colour over a coat of primer on new or previously untreated surfaces of wall complete all as specified and as directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. Note:- opening of existing wind tie where required for taking down of AC sheet is deemed to be included in the rate quoted .

Dismantling of timber scantling 40 Sqcm and over in section in any position such as in rafter, purlins etc in unframed work complete all as specified and as directed

Dismantling of timber fillets , rails, posts, rafters, purlin etc under 40 sqcm in section, in any position in unframed work complete all as specified and as directed.

S&F rolled mild steel section work as in main and cross beam, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates and cooler stand and similar work confirming to Fe 410W(Gde E-250 quality A) complete all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick, Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick,Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.(For sun shed)

S&F plain polycarbonate roofing sheet of thickness not less than 2mm of colour as reqd by Engineer-in-charge fixed with self tapping screws as specified & directed.

Supply and fixing 10mm thick toughned glass as in hinged doors, partitions automatic door sand similar work including cutting to shape, drilling holes required including taking out old broken/ unservicable glass complete all as specified and as directed

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

All as per srl item above but 20 mm bore

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per srl item above but 20 mm bore

M & L for refixing 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc.

All as per srl item above but 20 mm bore

Taking down the existing fountain submersible motor any capacity & make, transporting the private workhop. Dismantling the submersible motor monoblock completely taking out the burnout PVC insulated copper winding wire from slot carefully alongthwith impeller with shaft and bushes from pump side. cleaning the inner and outer area of pump, winding the PVC coated copper winding wire for the existing size, replace the bushes and all connected accessories complete, testing and commissioning.

Taking down the existing submersible water proof cable any size / capacity and replace the new PVC flat proof cable of size 4 sqmm core complete.

Taking out the existing unserviceable water proof LED decorative light 10 W and replacement new one and colour complete.

Taking out the existing unserviceable motor control panel and replacement of the components such as MCB, on/off switch, voltmeter, ammeter, capacitor etc complete testing under serviceable condition.

Taking down the unserviceable motor control starter any type/capacity/make and replace the same with new one complete.

Taking down the unserviceable wiring and replaced as existing capacity of the wire complete.

Taking down the fountain nozzles and replaced with the same size/angle complete.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/S SHIVA TRADERS (BID ID -3326880)

HARNAM SINGH ANIL SINGH (BID ID -3325888)

M/S A.R BUILDERS (BID ID -3325449)

m/s bobby enterprises (BID ID -3324090)

ROHIT ENTERPRISES (BID ID -3324207)

M/S SACHENDRA KUMAR JAIN (BID ID -3326149)

m/s gupta trading (BID ID -3325517)

PRATAP CONSTRUCTION (BID ID -3324344)