Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | KANTI PRASAD MITTAL ₹29.0 Cr | ₹29.0 Cr | - |
| 2 | Qualified | - | Qualified |
Tender Value
Refer Docs
Closing Date
27 Dec 2024, 11:00 amClosed
Dharmendra Kumar
RHQ, NR1, SCO BAY 5-10, SECTOR-16, FARIDABAD-121002, HARYANA
Retrofitting the 220 kV Switchyard equipments and control and protection system with Substation Automation System and SPR based Control and Protection System at Mandola Substation.
NR1/NT/W-AIS/DOM/I00/24/15479
Open
Supply, errection and Commissioning
Works
400 kv Mandola Substation, POWERGRID NR1
Applicable as per Annexure-A BDS of Vol-I of bidding document (RFX-5002004051)
₹25,000
15 Jul 2025
27 Nov 2024
27 Dec 2024
27 Nov 2024
27 Dec 2024
27 Nov 2024
12 Dec 2024
Package Name Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
Specification No. Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
1 Fill up only green shaded cells in Sch-1, Sch-2, Sch-3, Sch-4, Sch-7 and Bid Form 2nd Envelope.
2 All the cells in Sch-5 & Sch-6 are auto filled, therefore no cell is required to be filled up there.
3 Instructions / error messages, if any, will be displayed automatically after selecting the cell.
4 After filling up all the schedues, save the file, take print out of all the schedules and Bid form and sign & stamp and submit them as hard copy of the 2nd envelope (Price part) of the bid. Also ensure to submit the soft copy of the the same file on CD/ DVD.
पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
I While filling up the worksheets following may please be observed :
(i) Fill up only green shaded cells.
(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.
(iii) Select only the options provided in pull down menus.
(iv) Do not link any cell of this work book with any other work book.
(v) Do not use copy & paste or cut & paste options for filling up the data.
(vi) Do not reformat any of the cell of the work book.
II This Workbook consists of following worksheets :
Opening page of the workbook.
Names of Bidder :
● Select Sole Bidder or JV (Joint Venture) from the pull down menu. Do not leave this cell blank.
● Select nos. of the JV Partners other than the Lead Partner from drop down menu.
● In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.
● Fill up names and address of the Sole Bidder and /or Joint Venture.
● Fill up date in dd-mmm-yyyy format from drop down menu.
● Click for Sch-1 given at the right top of the worksheet to go to Sch-1.
Sch-1 (Ex-works Prices) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Corresponding cell for mode of transaction shall be come enable only after filling up the unit rate, therefore first fill up the unit rate and then mode of transaction for the corresponding item.
● Select either Direct or Bought-out from the drop down menu. Do not leave the cell blank the same shall be deemed to be Bought-out if the cell is left blank.
● Total amount shall get calculated automatically.
● Type Test charges shall appear automatically after filling up Sch-7 appropriately.
Sch-2 (Freight & Insurance Charges) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
Sch-3 (Erection Charges) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
Sch-4 (Training Charges) :
● Not applicable, hence no cell is required to be filled up.
Sch-4b (Maintenance Charges during and after Defect Liability Period) :
● Not applicable, hence no cell is required to be filled up.
Sch-5 (Summary of Taxes and Duties applicable on the Goods) :
● No cell is required to be filled in by the bidder in this worksheet.
● Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.
● No cell is required to be filled in by the bidder in this worksheet.
Sch-7 (Type Test Charges) :
● Fill up the rates & location where type tests are proposed.
● Total of this Sch-7 shall automatically appear in Sch-1.
Bid from 2nd Envelope :
● Fill up ref. no. as bidder's ref no. of this letter.
● This letter shall consider the net price as per Sch-6 (After Discount).
● Fill up names & Designation of the representatives of other JV partner(s) if the bidder is JV (Joint Venture) .
● Fill up additional information as required.
Happy Bidding !
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Sole Bidder 1 Sole Bidder 1
Joint Venture 2 or More JV (Joint Venture) 2 or More
Enter following details of the bidder
Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 1 0 Sole Bidder 1 0
Name of Sole Bidder …….. …….. …….. …….. …….. ……..
Address of Sole Bidder …….. …….. …….. …….. …….. ……..
Name of other Partner - 1
Address of other Partner - 1
Name of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..
Address of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..
email ID of Bid Signatory
Mobile No. of Bid Signatory
Tel No. of Bid Signatory
Fax No. of Bid Signatory
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 1 Schedule - 1 Direct Total 0 Sole Bidder `
BO Total #REF! 0
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
PLANT AND EQUIPMENT (INCLUDING MANDATORY SPARES PARTS) TO BE SUPPLIED, INCLUDING TYPE TEST CHARGES FOR TESTS TO BE CONDUCTED Direct
All Prices are in Indian Rupees. Bought-Out
SI. No. PR No PR Line Item No Activity Description Material Code HSN Code Whether HSN in column ‘ 6 ’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable (in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Item Description Unit Qty. Unit Ex-works price (excluding GST) Total Ex-works price (excluding GST) GST Tax as confirmed by Bidder
PART A (Substation Portion)
I SUPPLY ITEMS Revaluation of J column Tax Calculation
1 18 245kV, 2500A, 50KA Circuit Breaker (3-Phase) with support structure EA 18 Included 0.00 0 0.00
2 18 245 kV, 2500A, 50KA, 1-Phase Current Transformer with 150% extended EA 54 Included 0.00 0 0.00
3 18 245 kV,1600A, 40 KA, HCB tandom Isolator without E/s EA 16 Included 0.00 0 0.00
4 18 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with one E/S EA 12 Included 0.00 0 0.00
5 18 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with two E/S EA 13 Included 0.00 0 0.00
6 18 216kV Surge Arrester (1-phase) EA 9 Included 0.00 0 0.00
7 18 245 kV, 4400pf Capacitive Voltage Transformer (1- Phase) EA 25 Included 0.00 0 0.00
8 18 ACSR MOOSE CONDUCTOR MTRS. 2400 Included 0.00 0 0.00
9 18 4" EH IPS AL TUBE MTRS. 1600 Included 0.00 0 0.00
10 18 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 312 Included 0.00 0 0.00
11 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 120 Included 0.00 0 0.00
12 18 TERMINAL CONNECTOR ON 216kV LA TO SUIT TWIN `MOOSE' ACSR EA 24 Included 0.00 0 0.00
13 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 24 Included 0.00 0 0.00
14 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 24 Included 0.00 0 0.00
15 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 48 Included 0.00 0 0.00
16 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 32 Included 0.00 0 0.00
17 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 64 Included 0.00 0 0.00
18 18 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 48 Included 0.00 0 0.00
19 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
20 18 TERMINAL CONNECTOR ON 245kV CT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 24 Included 0.00 0 0.00
21 18 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 48 Included 0.00 0 0.00
22 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 48 Included 0.00 0 0.00
23 18 TERMINAL CONNECTOR ON 245 kV CVT TO SUIT TWIN MOOSE ACSR EA 24 Included 0.00 0 0.00
24 18 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 8 Included 0.00 0 0.00
25 18 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 144 Included 0.00 0 0.00
26 18 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 96 Included 0.00 0 0.00
27 18 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 192 Included 0.00 0 0.00
28 18 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 8 Included 0.00 0 0.00
29 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 24 Included 0.00 0 0.00
30 18 220KV BMK EA 8 Included 0.00 0 0.00
31 18 220KV CT JB EA 8 Included 0.00 0 0.00
32 18 220KV CVT JB EA 12 Included 0.00 0 0.00
33 18 ACSR MOOSE CONDUCTOR MTRS. 5000 Included 0.00 0 0.00
34 18 4" EH IPS AL TUBE MTRS. 800 Included 0.00 0 0.00
35 18 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 800 Included 0.00 0 0.00
36 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 60 Included 0.00 0 0.00
37 18 TERMINAL CONNECTOR ON 216kV LA TO SUIT TWIN `MOOSE' ACSR (THRU TYPE) EA 12 Included 0.00 0 0.00
38 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 12 Included 0.00 0 0.00
39 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 12 Included 0.00 0 0.00
40 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
41 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 16 Included 0.00 0 0.00
42 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 32 Included 0.00 0 0.00
43 18 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
44 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
45 18 TERMINAL CONNECTOR ON 245kV CT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 12 Included 0.00 0 0.00
46 18 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
47 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
48 18 TERMINAL CONNECTOR ON 220kV (LV) SIDE OF 500MVA ICT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 12 Included 0.00 0 0.00
49 18 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 4 Included 0.00 0 0.00
50 18 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 72 Included 0.00 0 0.00
51 18 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included 0.00 0 0.00
52 18 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 96 Included 0.00 0 0.00
53 18 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 4 Included 0.00 0 0.00
54 18 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 72 Included 0.00 0 0.00
55 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included 0.00 0 0.00
56 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND THROUGH CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included 0.00 0 0.00
57 18 220KV BMK EA 4 Included 0.00 0 0.00
58 18 220KV CT JB EA 4 Included 0.00 0 0.00
59 18 ACSR MOOSE CONDUCTOR MTRS. 600 Included 0.00 0 0.00
60 18 4" EH IPS AL TUBE MTRS. 400 Included 0.00 0 0.00
61 18 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 40 Included 0.00 0 0.00
62 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included 0.00 0 0.00
63 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB (1600A) TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
64 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB (1600A) TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
65 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
66 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 8 Included 0.00 0 0.00
67 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 10 Included 0.00 0 0.00
68 18 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
69 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
70 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
71 18 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
72 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
73 18 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 2 Included 0.00 0 0.00
74 18 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 36 Included 0.00 0 0.00
75 18 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 24 Included 0.00 0 0.00
76 18 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included 0.00 0 0.00
77 18 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 8 Included 0.00 0 0.00
78 18 220KV BMK EA 2 Included 0.00 0 0.00
79 18 220KV CT JB EA 2 Included 0.00 0 0.00
80 18 ACSR MOOSE CONDUCTOR MTRS. 600 Included 0.00 0 0.00
81 18 4" EH IPS AL TUBE MTRS. 400 Included 0.00 0 0.00
82 18 RIGID SPACERS TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 60 Included 0.00 0 0.00
83 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included 0.00 0 0.00
84 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
85 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
86 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
87 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 4 Included 0.00 0 0.00
88 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 8 Included 0.00 0 0.00
89 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
90 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
91 18 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND QUAD MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 16 Included 0.00 0 0.00
92 18 RIGID TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 18 Included 0.00 0 0.00
93 18 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 72 Included 0.00 0 0.00
94 18 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 16 Included 0.00 0 0.00
95 18 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 12 Included 0.00 0 0.00
96 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 6 Included 0.00 0 0.00
97 18 220KV BMK EA 2 Included 0.00 0 0.00
98 18 220KV CT JB EA 2 Included 0.00 0 0.00
99 18 ACSR MOOSE CONDUCTOR MTRS. 600 Included 0.00 0 0.00
100 18 4" EH IPS AL TUBE MTRS. 400 Included 0.00 0 0.00
101 18 RIGID SPACERS TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 60 Included 0.00 0 0.00
102 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included 0.00 0 0.00
103 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
104 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
105 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
106 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 12 Included 0.00 0 0.00
107 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
108 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
109 18 PG CLAMP TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included 0.00 0 0.00
110 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included 0.00 0 0.00
111 18 220KV BMK EA 2 Included 0.00 0 0.00
112 18 220KV CT JB EA 2 Included 0.00 0 0.00
113 18 ACSR MOOSE CONDUCTOR MTRS. 10500 Included 0.00 0 0.00
114 18 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 36 Included 0.00 0 0.00
115 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND THROUGH CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included 0.00 0 0.00
116 18 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 72 Included 0.00 0 0.00
117 18 TERMINAL CONNECTOR ON 245 kV CVT TO SUIT TWIN MOOSE ACSR NOS. 12 Included 0.00 0 0.00
118 18 220KV CVT JB NOS. 4 Included 0.00 0 0.00
119 18 420kV, 3150A, 50KA, Isolator (3-phase) (Double Break) with one E/S EA 8 Included 0.00 0 0.00
120 18 220kV Circuit Breaker Relay Panel without Auto Reclose (with Automation) EA 10 Included 0.00 0 0.00
121 18 220kV Circuit Breaker Relay Panel with Auto Reclose (with Automation) EA 8 Included 0.00 0 0.00
122 18 220kV Line Protection Panel (with Automation) EA 8 Included 0.00 0 0.00
123 18 Complete Substation automation System for 220kV bay as per Technical Specification EA 19 Included 0.00 0 0.00
124 18 Spares-Relay & protection Panels (with automation) LS 1 Included 0.00 0 0.00
125 18 Spares-Substation Automation System LS 1 Included 0.00 0 0.00
126 18 Spare-245kV Circuit Breaker LOT 1 Included 0.00 0 0.00
127 18 Spare-245kV Capacitive Voltage Transformer (1- Phase) LOT 1 Included 0.00 0 0.00
128 18 Spare-245kV Isolator LOT 1 Included 0.00 0 0.00
129 18 Spare-245kV CT LOT 1 Included 0.00 0 0.00
130 18 Spare-216kV Surge Arrester LOT 1 Included 0.00 0 0.00
131 1.1kV grade Control Cables (PVCinsulated) along withlugs,glands,straight joints &accessories,etc. 0.00 0 0.00
132 18 1.1KV GRADE 5CX2.5 SQMM CONTROL CABLE KM 20.5 Included 0.00 0 0.00
133 18 1.1KV GRADE 7CX2.5 SQMM CONTROL CABLE KM 2 Included 0.00 0 0.00
134 18 1.1KV GRADE 10CX2.5 SQMM CONTROL CABLE KM 3 Included 0.00 0 0.00
135 18 1.1KV GRADE 14CX2.5 SQMM CONTROL CABLE KM 7.5 Included 0.00 0 0.00
136 18 1.1KV GRADE 19CX2.5 SQMM CONTROL CABLE KM 1.5 Included 0.00 0 0.00
137 18 1.1KV GRADE 27CX2.5 SQMM CONTROL CABLE KM 1.5 Included 0.00 0 0.00
138 1.1kV grade Power Cables (PVCinsulated)along with lugs,glands,straight LS joints & accessories,etc 0.00 0 0.00
139 18 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE KM 9 Included 0.00 0 0.00
140 18 1.1KV GRADE 3.5CX35 SQMM (PVC) POWER CABLE KM 2 Included 0.00 0 0.00
141 18 1.1KV GRADE 4CX16 SQMM (PVC) POWER CABLE KM 14.5 Included 0.00 0 0.00
142 18 1.1KV Grade 2Cx6 Sqmm Armoured (PVC)Power Cable KM 2.5 Included 0.00 0 0.00
143 18 1.1KV Grade 4Cx6 Sqmm Armoured (PVC)Power Cable KM 4.5 Included 0.00 0 0.00
144 18 Air conditioning system for Switchyard Panel Room of 6m length Set 6 Included 0.00 0 0.00
145 18 Fire Detection and Alarm System for Switchyard Panel Room of 6 m length Set 6 Included 0.00 0 0.00
146 18 Illumination System for switchyard panel room of 6 m length No 6 Included 0.00 0 0.00
147 18 4.5 Kg CO2 type potable fire extinguisher No 12 Included 0.00 0 0.00
Total Ex-works Price 0.00 0.00
Total Type Test charges as per Schedule-7 0.00
Total Ex-works Price including Type Test charges 0.00
Total GST Tax as confirmed by Bidder 0.00
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
* In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 1 Direct Total 0 Sole Bidder `
BO Total #REF! 0
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES : EX-WORKS PRICES)
Bidder’s Name and Address (Sole Bidder) : To:
Contract Services
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Plant and Equipment (including Mandatory Spares Parts) to be supplied, including Type Test Charges for Tests to be conducted. Direct
All Prices are in Indian Rupees. Bought-Out
SI. No. Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct / Bought-out)
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
Total Ex-Works Price Direct 0.00 Direct
Total Ex-Works Price Bought Out 0.00
Total Ex-Works Price 0.00
Total Type Test charges as per Schedule-7 #REF! #REF! #REF!
Total Ex-works Price including Type Test charges #REF! #REF! #REF!
Discount Sch-1 #REF! MPD Sch-1 #REF!
Dis Alert #REF!
Note : Specify amount of Excise Duty, Sales Tax/'VAT and other taxes payable on the transaction between the Contractor and the Employer and octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items (to be identified in the Contract), which shall be dispatched directly from the sub-vendor’s works to the Employer’s site (sale-in-transit), separately in Schedule-5. Excise Duty, Sales tax and other levies for all the bought-out items are to be included in the EXW Price (Col. No. 5) only and not to be indicated in Schedule-5.
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 2
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
LOCAL TRANSPORTATION, IN-TRANSIT INSURANCE, LOADING AND UNLOADING
All Prices are in Indian Rupees.
SI. No. PR No PR Line Item No Activity Description Material Code Description Unit Quantity Unit Freight, In-transit Insurance, loading & unloading Charges Total Freight, In-transit Insurance, loading & unloading Charges
PART A (Substation Portion)
1 245kV, 2500A, 50KA Circuit Breaker (3-Phase) with support structure EA 18 Included
2 245 kV, 2500A, 50KA, 1-Phase Current Transformer with 150% extended EA 54 Included
3 245 kV,1600A, 40 KA, HCB tandom Isolator without E/s EA 16 Included
4 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with one E/S EA 12 Included
5 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with two E/S EA 13 Included
6 216kV Surge Arrester (1-phase) EA 9 Included
7 245 kV, 4400pf Capacitive Voltage Transformer (1- Phase) EA 25 Included
8 ACSR MOOSE CONDUCTOR MTRS. 2400 Included
9 4" EH IPS AL TUBE MTRS. 1600 Included
10 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 312 Included
11 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 120 Included
12 TERMINAL CONNECTOR ON 216kV LA TO SUIT TWIN `MOOSE' ACSR EA 24 Included
13 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 24 Included
14 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 24 Included
15 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 48 Included
16 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 32 Included
17 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 64 Included
18 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 48 Included
19 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 24 Included
20 TERMINAL CONNECTOR ON 245kV CT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 24 Included
21 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 48 Included
22 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 48 Included
23 TERMINAL CONNECTOR ON 245 kV CVT TO SUIT TWIN MOOSE ACSR EA 24 Included
24 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 8 Included
25 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 144 Included
26 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 96 Included
27 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 192 Included
28 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 8 Included
29 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 24 Included
30 220KV BMK EA 8 Included
31 220KV CT JB EA 8 Included
32 220KV CVT JB EA 12 Included
33 ACSR MOOSE CONDUCTOR MTRS. 5000 Included
34 4" EH IPS AL TUBE MTRS. 800 Included
35 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 800 Included
36 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 60 Included
37 TERMINAL CONNECTOR ON 216kV LA TO SUIT TWIN `MOOSE' ACSR (THRU TYPE) EA 12 Included
38 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 12 Included
39 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 12 Included
40 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 24 Included
41 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 16 Included
42 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 32 Included
43 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 24 Included
44 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 12 Included
45 TERMINAL CONNECTOR ON 245kV CT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 12 Included
46 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 24 Included
47 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 24 Included
48 TERMINAL CONNECTOR ON 220kV (LV) SIDE OF 500MVA ICT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 12 Included
49 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 4 Included
50 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 72 Included
51 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included
52 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 96 Included
53 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 4 Included
54 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 72 Included
55 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included
56 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND THROUGH CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included
57 220KV BMK EA 4 Included
58 220KV CT JB EA 4 Included
59 ACSR MOOSE CONDUCTOR MTRS. 600 Included
60 4" EH IPS AL TUBE MTRS. 400 Included
61 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 40 Included
62 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included
63 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB (1600A) TO SUIT 4" IPS Al. TUBE EA 6 Included
64 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB (1600A) TO SUIT 4" IPS Al. TUBE EA 6 Included
65 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included
66 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 8 Included
67 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 10 Included
68 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 6 Included
69 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
70 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
71 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 12 Included
72 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 12 Included
73 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 2 Included
74 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 36 Included
75 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 24 Included
76 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included
77 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 8 Included
78 220KV BMK EA 2 Included
79 220KV CT JB EA 2 Included
80 ACSR MOOSE CONDUCTOR MTRS. 600 Included
81 4" EH IPS AL TUBE MTRS. 400 Included
82 RIGID SPACERS TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 60 Included
83 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included
84 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included
85 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included
86 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included
87 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 4 Included
88 TERMINAL CONNECTOR ON 245kV ISO TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 8 Included
89 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
90 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
91 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND QUAD MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 16 Included
92 RIGID TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 18 Included
93 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 72 Included
94 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 16 Included
95 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 12 Included
96 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 6 Included
97 220KV BMK EA 2 Included
98 220KV CT JB EA 2 Included
99 ACSR MOOSE CONDUCTOR MTRS. 600 Included
100 4" EH IPS AL TUBE MTRS. 400 Included
101 RIGID SPACERS TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 60 Included
102 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included
103 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included
104 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included
105 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included
106 TERMINAL CONNECTOR ON 245kV ISO TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 12 Included
107 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
108 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
109 PG CLAMP TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included
110 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included
111 220KV BMK EA 2 Included
112 220KV CT JB EA 2 Included
113 ACSR MOOSE CONDUCTOR MTRS. 10500 Included
114 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 36 Included
115 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND THROUGH CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included
116 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 72 Included
117 TERMINAL CONNECTOR ON 245 kV CVT TO SUIT TWIN MOOSE ACSR NOS. 12 Included
118 220KV CVT JB NOS. 4 Included
119 420kV, 3150A, 50KA, Isolator (3-phase) (Double Break) with one E/S EA 8 Included
120 220kV Circuit Breaker Relay Panel without Auto Reclose (with Automation) EA 10 Included
121 220kV Circuit Breaker Relay Panel with Auto Reclose (with Automation) EA 8 Included
122 220kV Line Protection Panel (with Automation) EA 8 Included
123 Complete Substation automation System for 220kV bay as per Technical Specification EA 19 Included
124 Spares-Relay & protection Panels (with automation) LS 1 Included
125 Spares-Substation Automation System LS 1 Included
126 Spare-245kV Circuit Breaker LOT 1 Included
127 Spare-245kV Capacitive Voltage Transformer (1- Phase) LOT 1 Included
128 Spare-245kV Isolator LOT 1 Included
129 Spare-245kV CT LOT 1 Included
130 Spare-216kV Surge Arrester LOT 1 Included
131 1.1kV grade Control Cables (PVCinsulated) along withlugs,glands,straight joints &accessories,etc.
132 1.1KV GRADE 5CX2.5 SQMM CONTROL CABLE KM 20.5 Included
133 1.1KV GRADE 7CX2.5 SQMM CONTROL CABLE KM 2 Included
134 1.1KV GRADE 10CX2.5 SQMM CONTROL CABLE KM 3 Included
135 1.1KV GRADE 14CX2.5 SQMM CONTROL CABLE KM 7.5 Included
136 1.1KV GRADE 19CX2.5 SQMM CONTROL CABLE KM 1.5 Included
137 1.1KV GRADE 27CX2.5 SQMM CONTROL CABLE KM 1.5 Included
138 1.1kV grade Power Cables (PVCinsulated)along with lugs,glands,straight LS joints & accessories,etc
139 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE KM 9 Included
140 1.1KV GRADE 3.5CX35 SQMM (PVC) POWER CABLE KM 2 Included
141 1.1KV GRADE 4CX16 SQMM (PVC) POWER CABLE KM 14.5 Included
142 1.1KV Grade 2Cx6 Sqmm Armoured (PVC)Power Cable KM 2.5 Included
143 1.1KV Grade 4Cx6 Sqmm Armoured (PVC)Power Cable KM 4.5 Included
144 Air conditioning system for Switchyard Panel Room of 6m length Set 6 Included
145 Fire Detection and Alarm System for Switchyard Panel Room of 6 m length Set 6 Included
146 Illumination System for switchyard panel room of 6 m length No 6 Included
147 4.5 Kg CO2 type potable fire extinguisher No 12 Included
Total F&I Price 0.00
Place: Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 2 Dis
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0
(SCHEDULE OF RATES AND PRICES : FREIGHT & INSURANCE CHARGES) AS per Percent #REF!
As per lum-sum on Sch-2 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-2 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage Discount 0.00%
All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
SI. No. Description Unit Quantity Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
Total F&I Price #REF!
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 3
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!
As per lum-sum on Sch-3 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-3 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage lum-sum 0.00%
INSTALLATION CHARGES Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
All Prices are in Indian Rupees.
SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Erection Charges Total Erection Charges Total GST as confirmed by Bidder Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges
PART A (Substation Portion)
I INSTALLATION Revaluation of J column Tax Calculation
1 18 245kV, 2500A, 50KA Circuit Breaker (3-Phase) with support structure EA 18 Included 0.00 0 0
2 18 Dismantling of existing Circuit Breaker EA 18 Included 0.00 0 0
3 18 245 kV, 2500A, 50KA, 1-Phase Current Transformer with 150% extended EA 54 Included 0.00 0 0
4 18 Dismantling of existing 1-Phase Current Transformer EA 54 Included 0.00 0 0
5 18 245 kV,1600A, 40 KA, HCB tandom Isolator without E/s EA 16 Included 0.00 0 0
6 18 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with one E/S EA 12 Included 0.00 0 0
7 18 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with two E/S EA 13 Included 0.00 0 0
8 18 Dismantling of existing Isolator EA 41 Included 0.00 0 0
9 18 216kV Surge Arrester (1-phase) EA 9 Included 0.00 0 0
10 18 Dismantling of existing Surge Arrester EA 9 Included 0.00 0 0
11 18 245 kV, 4400pf Capacitive Voltage Transformer (1- Phase) EA 25 Included 0.00 0 0
12 18 Dismantling of existing Capacitive Voltage Transformer (1- Phase) EA 25 Included 0.00 0 0
13 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Line Bay EA 8 Included 0.00 0 0
14 18 Dismantling of existing erection Hardware(include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Line Bay EA 8 Included 0.00 0 0
15 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc)for 220kV layout (Double Main and Transfer Scheme) Transformer Bay EA 4 Included 0.00 0 0
16 18 Dismantling of existing Erection Hardware(include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme) Transformer Bay EA 4 Included 0.00 0 0
17 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc)for 220kV layout (Double Main and Transfer Scheme) Transfer Bus Coupler Bay EA 2 Included 0.00 0 0
18 18 Dismantling of existing Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme) Transfer Bus Coupler Bay EA 2 Included 0.00 0 0
19 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus Coupler Bay EA 2 Included 0.00 0 0
20 18 Dismantling of existing Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus Coupler Bay EA 2 Included 0.00 0 0
21 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus section Bay as per technical specification EA 2 Included 0.00 0 0
22 18 Dismantling of Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus section Bay as per technical specification EA 2 Included 0.00 0 0
23 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus work (three Bay) as per technical specification SET 6 Included 0.00 0 0
24 18 Dismantling of Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc)for 220kV layout (Double Main and Transfer Scheme)-Bus work (three Bay) as per technical specification SET 6 Included 0.00 0 0
25 18 420kV, 3150A, 50KA, Isolator (3-phase) (Double Break) with one E/S EA 8 Included 0.00 0 0
26 18 Dismantling of existing 420kV Isolator (3-phase) EA 8 Included 0.00 0 0
27 18 220kV Circuit Breaker Relay Panel without Auto Reclose (with Automation) EA 10 Included 0.00 0 0
28 18 220kV Circuit Breaker Relay Panel with Auto Reclose (with Automation) EA 8 Included 0.00 0 0
29 18 220kV Line Protection Panel (with Automation) EA 8 Included 0.00 0 0
30 18 Dismantling of existing 220kV Circuit Breaker Relay Panel without Auto Reclose EA 10 Included 0.00 0 0
31 18 Dismantling of existing 220kV Circuit Breaker Relay Panel with Auto Reclose EA 8 Included 0.00 0 0
32 18 Dismantling of existing 220kV Line Protection Panel EA 8 Included 0.00 0 0
33 18 Complete Substation automation System for 220kV bay as per Technical Specification EA 19 Included 0.00 0 0
34 1.1kV grade Control Cables (PVCinsulated) along withlugs,glands,straight joints &accessories,etc. 0 0
35 18 1.1KV GRADE 5CX2.5 SQMM CONTROL CABLE KM 20.5 Included 0.00 0 0
36 18 1.1KV GRADE 7CX2.5 SQMM CONTROL CABLE KM 2 Included 0.00 0 0
37 18 1.1KV GRADE 10CX2.5 SQMM CONTROL CABLE KM 3 Included 0.00 0 0
38 18 1.1KV GRADE 14CX2.5 SQMM CONTROL CABLE KM 7.5 Included 0.00 0 0
39 18 1.1KV GRADE 19CX2.5 SQMM CONTROL CABLE KM 1.5 Included 0.00 0 0
40 18 1.1KV GRADE 27CX2.5 SQMM CONTROL CABLE KM 1.5 Included 0.00 0 0
41 1.1kV grade Power Cables (PVCinsulated)along with lugs,glands,straight LS joints & accessories,etc 0 0
42 18 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE KM 9 Included 0.00 0 0
43 18 1.1KV GRADE 3.5CX35 SQMM (PVC) POWER CABLE KM 2 Included 0.00 0 0
44 18 1.1KV GRADE 4CX16 SQMM (PVC) POWER CABLE KM 14.5 Included 0.00 0 0
45 18 1.1KV Grade 2Cx6 Sqmm Armoured (PVC)Power Cable KM 2.5 Included 0.00 0 0
46 18 1.1KV Grade 4Cx6 Sqmm Armoured (PVC)Power Cable KM 4.5 Included 0.00 0 0
47 18 Augmentation of existing 220kV bus bar protection scheme.(No. of bays as perspecification)-(with Automation)(shifting,testing and commissioning) EA 19 Included 0.00 0 0
48 18 Existing DTPC panles shifting,testing and commissioning EA 8 Included 0.00 0 0
49 18 Air conditioning system for Switchyard Panel Room of 6m length Set 6 Included 0.00 0 0
50 18 Fire Detection and Alarm System for Switchyard Panel Room of 6 m length Set 6 Included 0.00 0 0
51 18 Illumination System for switchyard panel room of 6 m length No 6 Included 0.00 0 0
52 18 4.5 Kg CO2 type potable fire extinguisher No 12 Included 0.00 0 0
II CIVIL WORKS Revaluation of J column Tax Calculation
1 18 220 kV Panel Room - Civil Works. All civil works as per drawing and specifications complete, including - brickwork, finishing (external and internal), windows etc.However,excavation, PCC, RCC and reinforcement shall be paid separately as per BPS. Sqm 180 Included 0.00 0 0
2 18 Cable Trench including all types of crossings, all metallic works and sump pit including concrte, form work and reinforcement steel Section 1-1 M 290 Included 0.00 0 0
3 18 Cable Trench including all types of crossings, all metallic works and sump pit including concrte, form work and reinforcement steel Section 2-2 M 380 Included 0.00 0 0
4 18 Cable Trench including all types of crossings, all metallic works and sump pit including concrte, form work and reinforcement steel Section 3-3 M 352 Included 0.00 0 0
5 18 Cable Trench including all types of crossings, all metallic works and sump pit including concrte, form work and reinforcement steel Section 4-4 M 350 Included 0.00 0 0
III CIVIL WORKS (DSR) Revaluation of J column Tax Calculation
1 18 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and rammingof bottoms, lift upto 1.5 m, including getting out the excavated soiland disposal of surplus excavated soil as directed, within a lead of 50m. Cum 195 Included 0.00 0 0
2 18 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) CU.M 20 Included 0.00 0 0
3 18 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) CU.M 61 Included 0.00 0 0
4 18 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) CU.M 12 Included 0.00 0 0
5 18 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Cum 39 Included 0.00 0 0
6 18 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete Sq.M 120 Included 0.00 0 0
7 18 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform Sq.M 600 Included 0.00 0 0
8 18 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Sq.M 120 Included 0.00 0 0
9 18 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts Sq.M 120 Included 0.00 0 0
10 18 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically Treated bars kg 8300 Included 0.00 0 0
Total Installation Charges 0.00 0 0
Total GST as confirmed by Bidder 0.00
* In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 3
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES : ERECTION CHARGES) AS per Percent #REF!
As per lum-sum on Sch-3 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-3 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage lum-sum 0.00%
All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
SI. No. Description Unit Quantity Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! (a) Detailed Soil Investigation
#REF! #REF! #REF! #REF! #REF! (b) All kinds of soil except fissured rock & hard rock
#REF! #REF! #REF! #REF! #REF! (e) River Crossing Location
#REF! #REF! #REF! #REF! #REF! (f)
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
Total Erection Price (A+B) #REF!
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 4
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES )
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Training Charges for Training to be imparted
SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Training Charges excluding GST Total Training Charges excluding GST Total GST as confirmed by Bidder
Revaluation of J column Tax Calculation
NOT APPLICABLE Revaluation of J column Tax Calculation
Included 0.00 0 0
Total Training Charges 0.00 0
Total GST as confirmed by Bidder 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 4b
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES )
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Maintenance Charges during & after Defect Laibility Period
SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Maintenance Charges excluding GST Total Maintenance Charges excluding GST Total GST as confirmed by Bidder
0 Revaluation of P column Tax Calculation
A. #REF! Revaluation of P column Tax Calculation
1 Included 0.00 0 0
2 Included 0.00 0 0
3 Included 0.00 0 0
4 Included 0.00 0 0
B. #REF! Revaluation of P column Tax Calculation
1 Included 0.00 0 0
2 Included 0.00 0 0
3 Included 0.00 0 0
4 Included 0.00 0 0
Total Maintenance Charges during and after Defect Liabilty Period 0.00 0
Total GST as confirmed by Bidder 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 5
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SUMMARY OF TAXES & DUTIES APPLICABLE ON PLANT & EQUIPMENT)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Sl. No. Item Nos. Total Price (INR) After Discount After MPDiscount
1 TOTAL GST ON GOODS Excise Duty #REF! Excise Duty #REF!
Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable. 0.00
2 TOTAL GST ON SERVICES Sales Tax 0.00 Sales Tax 0.00
Total GST on Installation Services (Schedule-3), Training to be imparted in India (Schedule-4) 0.00 #REF! 0 #REF! 0
GRAND TOTAL [1+2] 0.00 Grand Total after Discount #REF! Grand Total after MPD #REF!
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 5
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
SUMMARY OF TAXES & DUTIES APPLICABLE ON GOODS
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Sl. No. Item Nos. Total Price (INR)
1 TOTAL GST ON GOODS 0.00
Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable.
2 TOTAL GST ON SERVICES 0.00
Total GST on Installation Services (Schedule-3), Training to be imparted in India (Schedule-4a) and Maintenance Charges during and after Defect Liabilty Period (Schedule-4b)
GRAND TOTAL [1+2] 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 6
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(GRAND SUMMARY)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Sl. No. Description Total Price (INR)
1 TOTAL SCHEDULE NO. 1 0.00
Ex-works price of Plant and Equipment including Type Test Charges
2 TOTAL SCHEDULE NO. 2 0.00
Local Transportation, In-transit Insurance, loading & unloading
3 TOTAL SCHEDULE NO. 3 0.00
Installation Charges
4 TOTAL SCHEDULE NO. 4 0.00
Training Charges
4b TOTAL SCHEDULE NO. 4b 0.00
Maintenance Charges during & after Defect Laibility Period
5 TOTAL SCHEDULE NO. 5 0.00
Taxes and Duties
6 TOTAL SCHEDULE NO. 7 0.00
Type Test Charges [Total of this Schedule is included in Schedule - 1 above.]
GRAND TOTAL [1+2+3+4+5] 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 6 After Discount
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(GRAND SUMMARY)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Sl. No. Description Total Price (INR)
1 TOTAL SCHEDULE NO. 1 0.00
Ex-works price of Plant and Equipment including Type Test Charges
2 TOTAL SCHEDULE NO. 2 0.00
Local Transportation, In-transit Insurance, loading & unloading
3 TOTAL SCHEDULE NO. 3 0.00
Installation Charges
4 TOTAL SCHEDULE NO. 4 0.00
Training Charges
4b TOTAL SCHEDULE NO. 4b 0.00
Maintenance Charges during & after Defect Laibility Period
5 TOTAL SCHEDULE NO. 5 0.00
Taxes and Duties
6 TOTAL SCHEDULE NO. 7 0.00
Type Test Charges [Total of this Schedule is included in Schedule - 1 above.]
GRAND TOTAL [1+2+3+4+5] 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule 7
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!
As per lum-sum on Sch-7 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-7 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage Discount 0.0000%
Type tests on Earthwire, Hardwar Fittings & accessories of conductor & earthwire:
SL. NO. PR No Line Item No Code HSN Code Whether HSN in column ‘2’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total GST as confirmed by Bidder Revaluation of M column Tax Calculation Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)
1 Included 0.00 0 0.00
2 Included 0.00 0 0.00
TOTAL TYPE TEST CHARGES 0.00
Total GST as confirmed by Bidder 0.00
Date : -- Printed Name :
Place : Designation :
Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation 0 0
(SCHEDULE OF RATES AND PRICES ) 0 0
Bidder’s Name and Address (Sole Bidder) :
SL. NO. Description of Test #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) AS per Percent #REF!
As per lum-sum on Sch-7 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-7 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage Discount 0.0000%
Type Tests on Earthwire
SL. NO. Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
Sub-Total (I) #REF!
TOTAL TEST CHARGES (I) #REF!
Discount Sche-7 #REF! MPD Sche-7 #REF!
Dis Alert #REF!
Date : -- Printed Name :
Place : Designation :
Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation 0 0 0
(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) 0 0 0
Bidder’s Name and Address (Sole Bidder) : 0
SL. NO. Description of Test 0
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Letter of Discount
LETTER OF DISCOUNT
Contract Services
Power Grid Corporation of India Ltd.,
"Saudamini", Plot No.-2
Sector-29, (near IFFCO Chowk)
Gurgaon (Haryana) - 122001
Subject : Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
With reference to the subject tender, we hereby offer unconditional discount on the prices quoted by us as per details given here below : Eq Weightage of Rs/ % Final Discount Factor
1 Discount on lum-sum basis on total price quoted by us without Taxes & Duties. [The discount shall be proportionately applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2, Sch-3, Sch-4a, Sch-4b & Sch-7] In Rs. 0.00 0.0000000000%
2 Discount on percent basis on total price quoted by us without Taxes & Duties. [The discount shall be applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2 , Sch-3, Sch-4a, Sch-4b & Sch-7] In Percent (%) 0.00 0.00%
3 Discount on lum-sum basis on the Schedules as given below : [The discount shall be proportionately applicable on all the relevent items of the respective Schdules.] In Rs.
Schedule-1 : Ex works prices In Rs. 0.00 0.0000000000% Schedule-1 : Ex-Works Price 0.0000000000%
Schedule-2 : Freight & Insurance In Rs. 0.00 0.0000000000% Schedule-2 : Freight & Insurance 0.0000000000%
Schedule-3 : Erection Charges In Rs. 0.00 0.0000000000% Schedule-3 : Erection Charges 0.0000000000%
Schedule-4a : Training Charges In Rs. 0.00 0.0000000000% Schedule-4a : Training Charges 0.0000000000%
Schedule-4b : Maintenance Charges during and after DLP In Rs. 0.00 0.0000000000% Schedule-4b : Maintenance Charges 0.0000000000%
Schedule-7 : Type Test Charges In Rs. 0.00 0.0000000000% Schedule-7 : Type Test Charges 0.0000000000%
4 Discount on percent basis on the Schedules as given below : [The discount shall be applicable on all the relevent items of the respective Schdules.] In Percent (%)
Schedule-1 : Ex works prices In Percent (%) 0.00 0.00%
Schedule-2 : Freight & Insurance In Percent (%) 0.00 0.00%
Schedule-3 : Erection Charges In Percent (%) 0.00 0.00%
Schedule-4a : Training Charges In Percent (%) 0.00 0.00%
Schedule-4b : Maintenance Charges during and after DLP In Percent (%) 0.00 0.00%
Schedule-7 : Type Test Charges In Percent (%) 0.00 0.00%
Discount(s) offered at sl. No. 1 to 4 will get displayed and accounted for automatically in the respective items of the Schedules.
5 We hereby offer Multi-package discount as given below:
Multi-Package Discount(s) offered at sl. No. 5 will not get automatically accounted for in the respective items of the Schedules. The same shall be worked out saparately for evaluation.
Please consider this letter of discount as the integral part of our price bid.
Thanking you, we remain,
Yours faithfully,
For and on behalf of …….. …….. …….. …….. …….. ……..
Date : -- Printed Name :
Place : Designation :
Details of Octroi
Sl No. Description of Items Amount on which Octroi is applicable Rate of Octroi Octroi
Details of Entry Tax
Sl No. Description of Items Amount on which Entry Tax is applicable Rate of Entry Tax Entry Tax
Details of Other Taxes & Duties
Sl No. Description of Items Amount on which Other Taxes & Duties are applicable Description of Taxes & Duties Rate of Taxes & Duties Amount of Taxes & Duties
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Bid Form 2nd Envelope Sole Bidder 1 st 1 January
0 2 nd 2 February
BID FORM (Second Envelope) 3 rd 3 March
Bid Proposal Ref. No. 5 th 5 May
Date : -- 6 th #VALUE! 6 June
7 th #VALUE! 7 July
To: 8 th #VALUE! 8 August
Contracts Services, 3rd Floor 9 th #VALUE! 9 September
Power Grid Corporation of India Ltd., 10 th 10 October
"Saudamini", Plot No.-2 11 th 11 November
Sector-29, 12 th 12 December
Gurgaon (Haryana) - 122001 13 th
Name of Contract : Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation 15 th
Dear Ladies and/or Gentlemen, 16 th
Schedule 1 Plant and Equipment (Including Mandatory Spare Parts) to be supplied, including Type Test Charges. 21 st
Schedule 2 Local Transportation, In-transit Insurance, loading and unloading 22 th
Schedule 3 Installation Charges. 23 th
Schedule 4 Training charges for training to be imparted. 24 th
Schedule 4b Maintenance Charges during & after Defect Laibility Period.
Schedule 5 Taxes and Duties not included in Schedule 1 25 th
Schedule 6 Grand Summary [Schedule 1to 5] 26 th
Schedule 7 Break-up of Type Test Charges for Type Tests to be conducted 27 th
2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced. 31 st
3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
3.1 100% of applicable Taxes and Duties i.e GST which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.
3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.
4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 1
5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of …….. …….. …….. …….. …….. ……..
Date : -- Printed Name :
Place : Designation :
In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him.
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.
STATEMENT OF QUOTED / CORRECTED PRICES
All Figures are in Rupees
Sl. No. Price Component Quoted Price Corrected Price
1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00
2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00
3 TOTAL SCHEDULE NO.3: Installation Charges 0.00 0.00
4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable
5 TOTAL BID PRICE: (Excluding Taxes & Duties) 0.00 0.00
6 DISCOUNT #REF! #REF! #REF!
7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!
8 TAXES & DUTIES PAYABLE ADDITIONALLY
A) EXCISE DUTY 0 0.00
B) CENTRAL SALES TAX 0 0.00
C) VAT #REF! 0.00
D) ENTRY TAX / OCTROI #REF! 0.00
F) TOTAL TAXES & DUTIES #REF! 0.00
8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! 0.00
9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00
I) Bidder has indicated the following taxes and duties additionally applicable for their bid:
Excise Duty % as Excise Duty
#REF! VAT #REF! #REF!
#REF! Entry Tax/ Octroi #REF! #REF!
Others as Others
II) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 2% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated :
a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. 0
b) Excise Duty, as applicable on (a) above at the rate : 10.00% Rs. 0
c) Amount on which Sales Tax is applicable 0.00 0
d) CST, as applicable on (a) + ED (b) above at the rate : 2.00% Rs. 0
e) VAT, as applicable on (a) + ED (b) above at the rate : 1.00% 0
g) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. 0
h) Entry Tax, as applicable on (e) above at the rate : Rs. 0.00
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation Statement of Quoted / Corrected Prices Page
Spec. No. Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
STATEMENT OF QUOTED / CORRECTED PRICES
All Figures are in Rupees
Sl. No. Price Component Quoted Price Corrected Price
1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00
2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00
3 TOTAL SCHEDULE NO.3: Installation Charges 0.00 0.00
4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable
5 TOTAL BID PRICE: (Excluding Taxes & Duties) 0.00 0.00
6 DISCOUNT #REF! #REF!
7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!
8 TAXES & DUTIES PAYABLE ADDITIONALLY
A) EXCISE DUTY #REF! 0.00
B) CENTRAL SALES TAX /VAT #REF! #REF!
C) ENTRY TAX / OCTROI #REF! #REF!
D) OTHERS #REF! 0.00
E) TOTAL TAXES & DUTIES #REF! #REF!
8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! #REF!
9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00
I) Bidder has indicated the following taxes and duties additionally applicable for their bid:
a) Excise Duty Rs. #REF!
b) CST /VAT Rs. #REF!
c) Entry Tax / Octroi Rs. #REF!
d) Others Rs. #REF!
II) Bidder has offered following discount(s)
III) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 1% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated : Details of dicounts
a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. 0 Gross LS #REF! #REF! #REF! Gross % #REF! #REF! #REF!
b) Excise Duty @ 10.3% of (a) above Rs. 0 #REF! #REF!
c) CST / VAT @ 2% of Ex-Works of Direct Supplies (a) + ED (b) above Rs. #REF! Sch-1 Direct LS #REF! #REF! #REF! Sch-1 Direct % #REF! #REF! #REF!
d) Others Rs. Sch-1 BO LS #REF! #REF! #REF! Sch-1 BO % #REF! #REF! #REF!
e) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. #REF! Sch-2 LS #REF! #REF! #REF! Sch-2 % #REF! #REF! #REF!
f) Entry Tax @ 1% of (e) above Rs. #REF! Sch-3 LS #REF! #REF! #REF! Sch-3 % #REF! #REF! #REF!
Sch-7 LS #REF! #REF! #REF! Sch-7 % #REF! #REF! #REF!
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation Statement of Quoted / Corrected Prices Page Different Manner #REF!
Text for Discount #REF!
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Breakup of Mandatory spares REV_00
Sr No Description Unit Quantity
1 220 kV SF6 Circuit Breaker
One Pole of 245kV, 2500A, 50KA SF6 circuit breaker including pole column, interrupter, operating mechanism and Marshalling Box but without support structure No 1
Rubber gasket, O rings and seals for SF6 gas (complete replacement for one 245kV SF6 Circuit Breaker) set 1
Trip Coil Assy For 245kV SF6 CB 245kV SF6 Circuit Breaker No 2
Closing Coil Assy For 245kV SF6 Circuit Breaker No 1
Terminal pad for 245kV SF6 Circuit Breaker No 3
Molecular filter for 245kV SF6 Circuit Breaker SET 3
Corona rings (1 No of each type) for 245kV Circuit Breaker set 1
Relays, Power contactors, SFU, limit switches, push buttons, timers &MCB etc. (1 No of each type) for 245kV Circuit Breaker set 1
Pressure switches (1 No. of each type) for 245kV SF6 Circuit Breaker set 1
Aux. Switch/contact assembly for 245kV SF6 Circuit Breaker set 1
SF6 gas (40% of the total quantity) Lot 1
2 245 kV HORIZONTAL CENTRE BREAK Isolators
One complete pole including support Insulator, motor operating mechanism (MOM) and terminal connector but excluding structure(For HCB tandem) No 1
Copper contact fingers for male & female contacts set 2
Open / Close contactor assembly, timers, key interlock push button switch & auxiliary switches set 1
Limit switch set 2
Terminal Pads and connectors No 2
Corona shield rings No 3
3 245 kV DOUBLE BREAK ISOLATORS
1 Pole-245kV, 2500A, 40kA DB Isolator+1E No 1
1 Pole-245kV, 2500A, 40kA DB Isolator+2E No 1
Copper contact fingers for male & female contacts set 2
Open / Close contactor assembly, timers, key interlock push button switch & auxiliary switches set 1
Limit switch set 2
Terminal Pads and connectors No 2
Corona shield rings No 3
4 245 kV CurrentTransformer
245 kV, 2500A, 50KA, 1-Phase CurrentTransformer with 150% extended-Complete CT with Terminal connector & stool structure EA 2
5 245 kV Capacitive Voltage Transformer
245 kV, 4400pf Capacitive Voltage Transformer (1- Phase)-Complete CVT (each rating & not make) with terminal connectors & stool structure EA 2
6 216kV Surge Arrester
216kV Surge Arrester (1-phase)-Complete L.A. (each rating & not make) with insulating base and Terminal connector & stool structure EA 2
Surge counter/monitor EA 5
7 Relay & protection Panels (with automation)
IEC 61850 based Numerical distance relay (Main-I) with inbuilt DR and fault locator, OV prot., software EA 1
IEC 61850 based Numerical distance relay (Main-II) with inbuilt DR and fault locator, OV prot., software EA 1
8 Substation Automation System
Ethernet Switch Set 1
Name of Package : Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
Specification No. : NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
Completion Period 12 Months
: Attachments : General guidelines for filling up the Attachments 0
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
1 Fill up only green shaded cells in the relevent attachments.
2 Attachments 3(JV), 4, 4(A), 4(B), 5, 5(A), 6, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17,18, 19 and Bid Form for 1st Envelope are included here.
3 Attachment 1 Bid Security : To be submitted as perproforma provided in the bidding document.
4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.
5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items. Not included here.
6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.
7 Attachment 18 Safety Pact : To be submitted as per ITB Clause No. 9.3(r) and as per remarks in the Attach 18 SP.
8 Attachment-3(QR), Attachment 20, Attachment-21, Attachment-22, Attachment-23, Attachment-24, Attachment-25, Attachment-26, Attachment-27 & Attachment-28: To be submitted as per the provisions of the Bidding Documents ( Formats Attached seperately in Volume-III of Bidding Documents)
Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Sole Bidder 1
Yes JV (Joint Venture) 2
Enter following details of the bidder No
Specify type of Bidder [Select from drop down menu] 0 2 0
Whether the bidder is an MSE (Micro & Small Enterprise) Joint Venture 2 2 0
Enter the Name of Registration Authority
Name of Lead Partner
Address of Lead Partner
Name of other Partner - 1
Address of other Partner - 1
Route-1 of Annexure-A(BDS)
Route-2 of Annexure-A(BDS)
Name of other Partner - 2 (more, if any) Joint venture Route
Address of other Partner - 2 (more, if any)
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-3(JV) 0
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Joint Venture Agreement and Power of Attorney for Joint Venture*)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
Name(s) and Addresse(s) of other partner(s)
The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith 0
Date : -- Printed Name : 0
Place : Designation : 12
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-3(QR)
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Qualifying Requirement Data)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
For our Qualifying Requirements Data, please refer Attachment-3(QR) of this volume.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-4
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Form of Certificate of Origin and Eligibility)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We hereby certify that equipment and materials to be supplied are produced in [Name of Countries], eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]
We hereby certify that our company is incorporated and registered in [Name of Countries], eligible source country. [Name of Countries] [Name of Countries] [Name of Countries], [Name of Countries],
Date : -- Printed Name :
Place : Designation :
country. country. [Name of Countries], [Name of Countries],
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-4(A)
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
S.No. For Equipment Item Description Unit Quantity
Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-4(B)
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-5
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Bought-out & Sub-contracted Items)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of furnishing and installation of the subject Package:
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
We hereby declare that, we would not subcontract the erection portion of the contract without the prior approval of Employer.
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.
Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.
Name of Plant Address
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Annexure I to Attachment-5
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Annexure I to Attachment-5
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Details of the proposed sub-contractor/sub-vendor Details of the proposed sub-contractor/sub-vendor
Name Nationality
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-5A
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)
Bidder's Name and Address: Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
1 We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the subject package:
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)
Name Category (Micro or Small)
2 The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms and Procedures, Volume-I of bidding documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract.
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.
Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.
Name of Plant Address
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-5A
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)
Name Category (Micro or Small)
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-6
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Alternative, Deviations and Exceptions to the Provisions)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Annexure I toAttachment-6
(Alternative, Deviations and Exceptions to the Provisions)
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-7
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Details of Alternative Bid)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
No Alternative Bid
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-9
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Work Completion Schedule)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package i.e., Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation. for the period commencing from the effective date of Contract to us :
Sl. No. Description of Work Period in months from the effective date of contract
1 Detailed Engineering and drawing submission
a) commencement
2 Procurement of equipment/ components & assembly
a) commencement
a) commencement
4 Manufacturing
a) commencement
5 Shipments & Delivery
a) commencement
6 Establishment of site office
7 Installation at Site
a) commencement
8 Testing & Pre-commissioning
a) commencement
9 Trial Operation
a) commencement
Date : -- Printed Name :
Place : Designation :
Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-10
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Guarantee Declaration)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We confirm that the equipments offered shall have minimum performance specified in Technical Specifications. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.
Date -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-11
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Information regarding Ex-employees of POWERGRID in our Organisation)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We declare that we are aware of and have gone through the “Code of Business Conduct and Ethics for Senior Management Personnel”1 and “Code of Business Conduct and Ethics for Board Members”1 of POWERGRID (hereinafter referred to as the “Code of Conduct”). We further understand that as per the “Code of Conduct”, Senior Management Personnel including Board Members, who have retired/resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred “Code of Conduct”, within 1 year from the date of cessation of service/directorship unless approved by the Competent Authority. Accordingly, we hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation*
*In case the date of joining in the bidder’s organization of such ex-employee is within 1 year from the date of retirement/resignation from POWERGRID, No Objection Certificate/ approval from the Competent Authority must be furnished along with the bid or subsequent through clarification pursuant to ITB Clause 21.
In case of non-submission of No Objection Certificate/approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard. We further declare that any misrepresentation or submission of false/forged documents/information in this regard shall be dealt with as per the provisions of the Integrity Pact and/or the Bidding Documents and/or POWERGRID’s policy and procedures.
Date : -- Printed Name :
Place : Designation :
Note: 1. “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” are available on POWERGRID’s website https://www.powergrid.in. 2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid. 3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated ‘-‘ against the same, it shall be deemed that they have not employed any such person in their organization.
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) ATTACHMENT-12
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Price Adjustment Data)
Bidder’s Name and Address (Lead Partner) : To:
0 Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No.-2
Gurgaon (Haryana) - 122001
We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the Substation Package SS86. The necessary documentary evidence is enclosed.
Sl. No. Name of Materials/Labour Value of co-efficient Name of the published index Value of index
In accordance with Clause 2, Appendix-2, Form of Contract Agreement, Section-VI; Forms. Volume-I
A) For Equipment Ex-Works Price Component
I Reactor (excluding Insulating Oil) (ratings above 10MVAR or voltage above 33kV up to 400kV)
i) Copper a= Price Indices for copper wire rod, as published by IEEMA.
ii) Electrical Lamination Steel b= Price of CRGO Electrical Steel Lamination as published by IEEMA.
iii) Construction Steel c= Average price of Steel Plates (10mm thick), as published by IEEMA
iv) Insulating Material d= Price of Insulating Materials , as published by IEEMA.
v) Labour l= Indian field labour index – namely All-India Average Consumer Price Index Numbers for Industrial Workers (monthly) (Base 2016=100), as published by Labour Bureau, Shimla, Government of India (http://labourbureaunew.gov.in)
ERROR -Sum of all the coefficients including labour is not equal to 0.85
The sum of all the coefficients including labour shall be a+b+c+d+l=0.85
II Insulating oil for Reactors (ratings above 10MVAR or voltage above 33kV up to 400kV):
a) Insulating Oil e= 0.85 Transformer Oil (TO): Transformer oil conforming to IS:335-1993, supplied in drum(Ex-Refinery, Mumbai) as published by IEEMA.
I Circuit Breaker
a) Raw Material
b) Labour l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
a) Raw Material
b) Labour I= l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
II Capacitive VoltageTransformer
a) Raw Material
b) Labour l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
III Current Transformer
a) Raw Material
b) Labour l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
a) Raw Material
b) Labour l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
V Surge Arrester
a) Raw Material
b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.
VI PVC/XLPE Insulated Power and Control Cable
a) a=PVC Compound 0.15
b) Published Price of Metal IEEMA
i) Aluminium per MT IEEMA
ii) Copper per MT IEEMA
c) Weight in MT of Metal per kM (Size wise)
VII Substation Structures
i) Lattice Steel Structures & Pipe Structures (including bolts & nuts, washers & foundation bolts)
a) Raw Materials
i) a=Structural steel 0.58 JPC Market Price (Retail) for average Price of Steel Angles of size 50 x 50 x 6 mm of all cities in Rs./MT as published by Joint Plant Committee(JPC).
ii) b=Electrolytic Zinc 0.16 IEEMA
b) Labour 0.11 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
VIII. Series Reactor [ 420 kV, 12 ohm, 2500A, 1-ph air core dry type Series Reactor]
a) Raw Material Copper(a)
i) Aluminium(a) Aluminium(a)
b) Labour I= 0.85 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
The value of coefficient for raw materials: a=0.65 to 0.73 and value of coefficient for labour shall be between 0.12 and 0.20, so that sum of all the coefficients including labour shall be a+l=0.85
B. For Installation Price Component
I Installation price component (including Civil works but excluding ‘supply & placement of reinforcement steel’ and ‘concreting’)
i) Labour I= 0.80 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
II Supply & Placement of Reinforcement Steel
i) HSD 0.10 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
ii) Labour I= 0.05 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
iii) Manufacture of Basic Metals 0.65 Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
III For Concereting
i) HSD 0.20 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
ii) Labour I= 0.10 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).
iii) Manufacture of cement, lime and plaster 0.30 Wholesale Price Index Number for `Manufacture of cement, lime and plaster’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in)
iv) Cutting, shaping and finishing of stone 0.20 Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).
The Bidders are required to estimate and indicate the values of different coefficients for each of the items in the price variation formulae within the specified range such that their summation is as specified in the Bidding Documents. Where no value or ‘-’ or ‘shall be furnished later’ is specified against the coefficient, the same will be deemed to be zero and the fixed component would be suitably adjusted. If the values of all coefficients in price variation formulae indicated by the Bidder are within the specified range but their sum exceeds the summation specified in the Bidding Documents, the values of the coefficients shall be pro-rata adjusted such that the summation remains as per the provisions of the Bidding Documents. If the values of all coefficients indicated by the Bidder are within the specified range but their summation is less than the value specified in the Bidding Documents, the values of the coefficients as indicated by the Bidder shall be considered as such and the fixed component in the price variation formulae would be suitably adjusted. Further, if any of values of the coefficients indicated by the Bidder is out of the range specified in the Bidding Documents, the lower of the values, as indicated by the Bidder vis-à-vis lower value of the range for that coefficient specified in the Bidding Documents, shall be considered and the fixed component would be suitably adjusted.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-13
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Declaration regarding Social Accountability)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-14
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
Integrity Pact is annexed herewith this Volume.
Date : -- Printed Name :
Place : Designation :
Instruction for printing & submitting Integrity Pact
1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (o).
Power Grid Corporation of India Limited
having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai,New Delhi – 110016 hereinafter referred to as
having its Registered Office at
having its Registered Office at FALSE
hereinafter referred to as
"The Bidder/Contractor"
POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 1 of 8
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation. Package and Specification Number NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) POWERGRID values full compliance with all relevant laws of the land, rules, regulations, economic use of resources, and of fairness / transparency in its relations with its Bidders/ Contractors.
In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.
It is hereby agreed by and between the parties as unde r:
Section I - Commitments of POWERGRID
(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :
a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.
b) POWERGRID will, during the tender process treat all Bidder(s) with equity, fairness and reason. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.
c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personal interest in the Companies/Agencies participating in the Bidding/Tendering process and all known prejudiced persons.
(2) If POWERGRID obtains information on the conduct of any of its employee which is a criminal offence under the IPC / PC Act , or if there be a substantive suspicion in this regard, POWERGRID will inform its Chief Vigilance Officer and in addition disciplinary actions can be initiated under POWERGRID’s Rules.
Section II - Commitments of the Bidder/Contractor
(1) The Bidder/Contractor commits itself to take all measures necessary to prevent corruption. The Bidder/Contractor commits itself to observe the following principles during its participation in the tender process and during the contract execution:
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 2 of 8
a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which it is not legally entitled to, in order to obtain in exchange an advantage of any kind whatsoever during the tender process or during the execution of the contract.
b) The Bidder/Contractor will not enter into any illegal or undisclosed agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.
c) The Bidder/Contractor shall not pass any information provided by POWERGRID as part of business relationship to others and shall not commit any offence under PC / IPC Act.
d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.
e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.
f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/information in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.
g) The Bidder/Contractor shall ensure adoption of Integrity Pact by its Sub-contractors and shall be responsible for the same.
(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 3 of 8
Section III- Disqualification from tender process and exclusion from future contracts
(1) If the Bidder, before contract award, has committed a transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.
(2) If the Bidder/Contractor has committed a transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may, after following due procedures, ban /blacklist the Bidder/Contractor in line with POWERGRID’s policy for “Black-Listing of Firms / Banning of Business”. The imposition and duration of the ban will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The ban will be imposed for a maximum of 3 years.
(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the ban prematurely.
Section IV - Liability for violation of Integrity Pact
(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID is entitled for forfeiture of the Bid Guarantee under the Bid.
(2) If POWERGRID has terminated the contract under Section III or if POWERGRID is entitled to terminate the contract under Section III, POWERGRID shall be entitled to forfeit the Contract Performance Guarantee of this contract, in full or part thereof as may be decided, besides resorting to other remedies under the contract.
Section V- Previous Transgression
(1) The Bidder shall disclose in its Bid any transgressions occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country, that may impinge on the Anti-corruption principle.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 4 of 8
(2) If the Bidder makes incorrect statement on this subject, it can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason and further action can be taken in line with POWERGRID’s policies.
Section VI - Equal treatment to all Bidders / Contractors
(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.
Section VII - Punitive Action against violating Bidders / Contractors
If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or its subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).
(*)Section VIII - Independent External Monitor/Monitors
(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India. The names of the IEMs have been indicated in the Bidding Documents.
(2) The panel of IEMs shall review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. The panel of IEMs has right of access to all project documentation. The panel of IEMs may examine any complaint received by them and submit a report to Chairman-cum-Managing Director, POWERGRID, giving joint findings, at the earliest. The panel of IEMs may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 5 of 8
(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He / She reports to the Chairman-cum-Managing Director, POWERGRID.
(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his / her request and demonstration of a valid interest, unrestricted and unconditional access to their documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.
(5) POWERGRID will provide to the IEMs information as sought by him / her which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract. The IEMs shall also sign declaration on ’Non-Disclosure of Confidential Information’ and of ‘Absence of Conflict of Interest’. In case of any conflict of interest arising at a later date, the IEM shall inform Chairman-cum-Managing Director, POWERGRID and recuse himself/herself from that case
(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he / she will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.
(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.
(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under PC / IPC Act, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 6 of 8
(9) While representing any matter in relation to the Integrity pact inter-alia including its transgression to the panel of IEMs, POWERGRID and Bidder/Contractor shall not approach the court of law and await the decision of the IEM in the matter.
(10) The word ‘IEM’ would include both singular and plural.
(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.
Section IX - Pact Duration
This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.
Section X - Other Provisions
(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration/Conciliation clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.
(2) Changes and supplements as well as termination notices need to be made in writing. Side agreements have not been made.
(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.
(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
(5) Issues like Warranty/Guarantees etc. shall be outside the purview of IEMs.
(6) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral/conciliation or judicial proceedings (arising out of the arbitral/conciliation proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.
# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Integrity Pact Page 7 of 8
(7) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
Signature Signature
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
(Office Seal) (Office Seal)
Designation : Designation :
Witness 1 : Witness 1 :
Designation : Designation :
Witness 2 : Witness 2 :
Designation : Designation :
Integrity Pact Page 8 of 8
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-15
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
Option for Interest Bearing Advance(s) (Initial Advance and/or Engineering Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise
Bidder’s Name and Address (Lead Partner) : Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:
Interest Bearing Initial Advance
Supply Portion:
Services Portion:
Interest Bearing Engineering Advance:
II We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.
1. Name of the Supplier/ Contractor in whose favour payment is to be made
2. Address with PIN Code and State
Registered Office:
Correspondence Address:
3 (a). Status – Company/others
[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]
3 (b). Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment /notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached. Please refer remarks at the end of the Attachment.
3 (c). If 3(b) is 'Yes', please mentiom whether you are (Proprietary MSE/ Partnership MSE/Private Limited Company) owned by SC/ST Entrepreneurs.
3 (d). Are you a MSE owned by a women in line with Public Procurment Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurment Policy for Micro & Small Enterprises (MSEs) Amendment Order 2018 including subsequent amendment / notification/order . (Indicate Yes/No)
4. Permanent Account (PAN) No.
5. GSTIN Numbers
I. GSTIN in the Sates/UT from where the supply of goods take place
Name of the States/UT GSTIN number
II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)
Name of the States/UT GSTIN number
6. PF Registration No. of the Company
7. PF Regional Office covered (with Address)
8. Name of Contact Person
9. Contact Details
10. Bank Details for Electronic Payment
Name of the Bank:
Address of Branch:
Type of Account:
Type of Account: Current Account
11. 9 digit MICR code printed at bottom in middle, next to cheque no.
12. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.
*The definition of MSEs owned by SC/ST is as given under:
a. In case of proprietary MSE, proprietor(s) shall be SC /ST.
b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.
c. In case of Private Limited companies, at least 51% share shall be held by SC/ST promoters.
Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-16
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Additional Information)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
In support of the additional information required as per ITB Sub-Clause 9.3 (p) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):
1.0 The Bidder shall furnish
A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]
1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:
Name of Bidder (Lead Partner)
Name of the Banker by whom certificate issued
Date of certificate (should not be earlier than 3 months prior to date of bid opening)
Whether fund based/non fund based limits are indicated in the certificate
Whether extent of utilization is indicated in the certificate
1.2 The Bidder should accordingly also provide the following information/documents
(i) Details of Banker:
Address of Banker
Contact Name and Title
(ii) As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:
Sl. No. Letter Ref. Date Addressed to (name of the Bank)
2.0 Litigation History
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]
2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years
Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount
3.0 Details regarding previous transgressions of Integrity Pact
The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country.
3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years
Year Name of client Details of Transgression of Integrity Pact by the bidder
4.0 OTHER INFORMATION
4.1 Current Contract Commitments of works in progress
Bidders (individual firms or each partners of JV) should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.
Details of Contract Value of outstanding work (Rs.) Estimated completion date
4.2 Financial Data:
Details Actual (Previous five years) Projection for next five years
Total Liability
Current Liability
Profit before taxes
Profit after taxes
5.0 Details of Provident Fund Code Number of the Bidder [ref. ITB9.3(q)]
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-17
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Declaration for tax exemptions, reductions, allowances or benefits)
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
1 We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us.
2 We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):
Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any
(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-17
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name(s) and Addresse(s) of other partner(s) To:
Contract Services
Name : …… ……. …….. …… ……. …….. Power Grid Corporation of India Ltd.,
Address : …… ……. …….. …… ……. …….. "Saudamini", Plot No. 2, Sector 29
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-17
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
(Information regarding Ex-employees of POWERGRID in our Organisation)
Name(s) and Addresse(s) of other partner(s) To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-18
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
Safety Pact is attached herewith this Volume
Date : -- Printed Name :
Place : Designation :
Instruction for printing & submitting Safety Pact
1. The requisite format of Safety Pact is getting generated automatically and displayed here below.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other six pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Safety Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (s).
Between #REF! #REF!
Power Grid Corporation of India Limited #REF! #REF!
having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!
"POWERGRID", #REF! #REF!
0 1 having its Registered Office at ,
having its Registered Office at ,, 1 AND
having its Registered Office at FALSE
hereinafter referred to as
"The Bidder/Contractor"
POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation. Specification Number:NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 1 of 6
POWERGRID values full compliance with all relevant laws and regulations and the principles of Safety, Health& Environment in its relations with its Bidders/ Contractors.
In order to achieve these goals, POWERGRID and the above named Bidder / Contractor enter into this agreement called “Safety Pact” which will form part of the Bid.
It is hereby agreed by and between the parties as under:
Section I - Commitments of POWERGRID
POWERGRID commits itself to take all measures necessary to prevent accidents duringConstruction and Operation of the Transmission Assets and to observe the following:
1. POWERGRID recognizes and accepts its statutory responsibilities for ensuring construction, operation and maintenance of equipments and for the provision of safe methods of work and safe working conditions.
2. POWERGRID recognizes and accepts its statutory responsibilities for ensuring safety of not only its employees but also that of the Contracting Agencies as Principal Employer.
3. POWERGRID shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction as well as Operation & Maintenance of the Transmission Assets.
4. POWERGRID shall conduct necessary awareness and training programmes to its Employees to augment the various safety requirements to be followed during Construction and Operation & Maintenance of the Transmission Assets from time to time.
5. POWERGRID shall, from time to time, issue necessary guidelines,instructions and deterrents to its employees as well as to the Contracting Agencies, to update them to take necessary preventive measures to avoid repetition of similar accident attributes.
6. POWERGRID shall review and provide necessary guidanceto the Contracting Agencies, as and when, any abnormality / special situations are brought to its notice by the Contracting Agencies during execution of the Transmission Projects being executed by them.
7. POWERGRID shall conduct periodical surveillance site inspections / audits to identify the unsafe conditions and unsafe actions, and bring them to the knowledge of the Contracting Agencies for taking timely corrective actions.
8. POWERGRIDshall investigate all accidents, fatal as well as non-fatal, to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents, and fix responsibility for the lapses leading to the accident.
9. POWERGRID shall augment the training to the workers and supervising personnel of the Contracting Agencies, as per schedules, upon nomination by the Contracting Agencies in reasonable time frame.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 2 of 6
10. POWERGRID shall exercise the right to claim and recover compensation from the Contracting Agencies in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the applicable Laws and contractual specifications / guidelines in vogue / issued by POWERGRID from time to time.
Section II – Commitments of the Bidder / Contractor:
The Bidder / Contractor commits himself to take all measures necessary to prevent / minimise accidents at their construction / erection sites and to observe the following:
1. The Bidder / Contractor recognizes and acceptsthe statutory and comprehensive responsibility for ensuring safe construction and Testing & Commissioning in the Transmission Projects being executed by them by providing safe methods of work, working conditions and Tools & Plants for human safety.
2. The Bidder / Contractor recognizes and accepts the responsibilities for ensuring safety of not only their employees but also that of the Sub-contractors, Principal Employer and the general public during execution of the Transmission Projects / works.
3. The Bidder / Contractor shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction of the Transmission Assets.
4. The Bidder / Contractor shall endeavour continuous development of safe methods of work to ensure that the effect of risks and perils are minimised to the extent possible and implement the same at their worksites.
5. The Bidder / Contractor shall conduct periodical Training to their Employees as well as to that of their Sub-contractors for safety awareness during construction works being executed by them.
6. The Bidder / Contractor shall provide all requisite Tools & Plants required for the work and ensure their healthiness by periodical inspections / testing as required. Unhealthy and sub-standard Tools & Plants will be immediately removed from site as and when they are identified.
7. The Bidder / Contractor shall,at their cost, provide all necessary Personal Protective Equipments such as Double Lanyard Safety Belts, Appropriate Fall Arrest Systems, Safety Helmets, Foot Wear, Hand Gloves, etc., as required for various activities pertaining to execution of the Projects / works, confirming to relevant Indian Standards.
8. The Bidder / Contractor shall ensure that dedicated qualified Safety Officers are posted in the construction projects being executed by them and ensure that the Safety Officer visits each and every gang periodically and conducts audits / inspections to identify the unsafe conditions and unsafe actions, to be rectified by the site supervising personnel promptly.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 3 of 6
9. The Bidder / Contractor shall conduct appropriate medical checks-up for the workers before deploying them at their construction sites to ensure that only those who are medically fit are deployed in the Projects / works to be executed by them. The copy of the Medical Reports shall be provided by the Bidder / Contractor to POWERGRID, whenever requested by POWERGRID.
10. The Bidder / Contractor shall screen the workers before deploying them at their construction sites to ensure that only those with the skills, experience and competence to work at height and also medically fit for work at height are deployed for work at height in the Projects executed by them.
11. The Bidder / Contractor shall ensure daily before starting the work that their site Supervising Personnel / Safety Officer briefs the workers about the work for the day and the safety measures / precautions required to be taken by them.
12. The Bidder / Contractor shall investigate all the accidents at their working sites to ascertain the lapses leading to the incident and the precautionary / corrective measures required to be taken to avoid recurrence of such accidents. These accidents will be reviewed at the Board Management level of the Agencies and the findings / recommendations will be put up to POWERGRID Apex Safety Board within the stipulated period.
13. The Bidder / Contractor shall ensure that all accidents, whether fatal or non-fatal in nature, will be informed to POWERGRID, in writing, immediately on the occurrence of the same,and in any case, within not more than 24 hours of occurrence of the same.
14. The Bidder / Contractor shall ensure that in case of any accident, all necessary medical help / support shall be provided to the victims / injured till they are completely fit to return to work.
15. The Bidder / Contractor shall ensure that in case of fatal accidents, all statutory Authorities, including Police, concerned Labour Dept. Officials, concerned Workmen Compensation Commissioner, etc., will be intimated in writing as required by the statutory Law, and followed up for compliance of all statutory obligations. The Bidder / Contractor shall own full responsibility of timely accident reporting to various authorities, including POWERGRID.
16. The Bidder / Contractor shall ensure that in case of fatality or serious injury leading to permanent disablement of the victims, the compensation amount will be deposited with the concerned authorities, as required by the Laws, and followed up for early disbursement to the beneficiaries of the victims.
17. The Bidder / Contractor assures that they shall co-operate to the fullest extent for carrying out any investigation of the accidents at their work sites by POWERGRID to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents. All factual details of the occurrence of the accident will be provided to POWERGRID, as and when required.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 4 of 6
18. The Bidder / Contractor assures that they take full responsibility of meeting the statutory obligations in case of accidents, and in case of any reference by any Statutory Body at a later date also, they shall provide all information to POWERGRID and meet all the statutory obligations, including payment of additional compensation, if any.
19. The Bidder / Contractor assures that in case of any inspection of their work site or Notice by any Statutory Authority, they shall comply promptly and inform POWERGRID Site Officials of the same, and also provide all necessary information and assistance for smooth compliance of the observations / instructions of such Authorities.
20. The Bidder / Contractor accepts the provisions regarding safety, including payment of any sums to POWERGRID, in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the Contractual Conditions, Safety Planand the Safety Pact, and confirm to abide by the same.
Section III – Equal treatment to all Bidders / Contractors:
1. POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
2. POWERGRID will disqualify, from the tender process, any bidder/ take punitive actions on the bidder, who does not sign this Pact or violate its provisions.
Section IV – Pact Duration:
This Pact begins when both parties have legally signed it. It expires for the successful Bidder / Contractor after closure of the contract and, for all other Bidders, after the contract has been awarded.
Section V – Other Provisions:
1. This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration/Conciliation clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under the Safety Pact.
2. Changes and supplements need to be made in writing, which shall come into force only upon mutual agreement / acceptance.
3. If the Contractor is a partnership firm or consortium of Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venue partners, as applicable as per the Tender Specifications.
4. Nothing in this agreement shall affect the rights of the parties available under General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
5. Should one or several provisions of this agreement turn out to be invalid, the reminder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
Safety Pact Page 5 of 6
Signature Signature
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)
(Office Seal) (Office Seal)
Designation : Designation :
Witness 1 : Witness 1 :
Designation : Designation :
Witness 2 : Witness 2 :
Designation : Designation :
Safety Pact Page 6 of 6
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Attachment-19
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation.
Bidder’s Name and Address (Lead Partner) : To:
Contract Services
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No. 2, Sector 29
Gurgaon (Haryana) - 122001
Further, we hereby confirm that except as mentioned in the Attachment – 6 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :
Date : -- Printed Name :
Place : Designation :
Specification No. :NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Bid Form 1st Envelope 1 one 1 st 1 January
2 two 2 nd 2 February
BID FORM (First Envelope) 3 three 3 rd 3 March
4 four 4 th 4 April
Bid Proposal Ref. No. 5 five 5 th 5 May
Date : -- 6 six 6 th #VALUE! 6 June
7 seven 7 th #VALUE! 7 July
To: 8 eight 8 th #VALUE! 8 August
Contract Services 9 nine 9 th #VALUE! 9 September
Power Grid Corporation of India Ltd., 10 ten 10 th 10 October
"Saudamini", Plot No. 2, Sector 29 11 eleven 11 th 11 November
Gurgaon (Haryana) - 122001 12 twelve 12 th 12 December
13 thirteen 13 th
14 fourteen 14 th
Name of Contract : Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation. 15 fifteen 15 th
Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th
1.0 Having examined the Bidding Documents, including Amendment Nos. ...[Enter the Amendment]… dated …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). ...[Enter the Amendment]… …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th
1.1 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.
2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th
In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th
(a) Attachment 1 : Not Applicable Bank Guarantee INR Banks certified Cheque Zero 20 twenty 20 th
(b) Attachment 2: A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Bank Guarantee (0) 21 st
(c) Attachment 3 : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3 (c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). 22 th
Further, the required Joint Venture Agreement signed by us and our Partners has also been furnished as per your format Attachment-3(JV). #REF! Applicable 23 th
Further the required deed of Joint Undertaking signed by us and Tower Manufacturer has also been furnished as per your format. 0 #REF! Not Applicable 24 th
(d) Attachment 4 : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. A list of Special Tools & Tackles to be used by us for erection, testing & Commissioning and to be handed over to Employer, the cost of which is included is our Bid Price, is also enclosed as per your format as Attachment 4A. A list of Special Tools & Tackles to be brought by the contractor for erection, testing & Commissioning and to be taken back after completion of work, whose cost in not included in our bid price, is enclosed as per your format as Attachment 4B. 25 th
(e) Attachment 5 : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th
(f) Attachment 5A : Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises
(g) Attachment 6 : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th
(h) Attachment 7 : The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. (Not Applicable) 28 th
(i) Attachment 8 : Manufacturer’s Authorisation Forms. 29 th
(j) Attachment 9 : Work Completion Schedule. 30 th
(k) Attachment 10 : Guarantee Declaration. 31 st
(l) Attachment 11 : Information regarding ex-employees of Employer in our firm.
(m) Attachment 12 : Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.
(n) Attachment 13 : Declaration regarding Social Accountability.
(o) Attachment 14 : Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.
(p) Attachment 15 : Option for Interest Bearing Advance(s) (Initial Advance and/or Engineering Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise
(q) Attachment 16 : Additional Information.
(r) Attachment 17 : Declaration for tax exemptions, reductions, allowances or benefits
(s) Attachment 18 : Safety Pact
(t) Attachment 19 : Declaration.
(u) Attachment 20 : Declaration of Key Managerial Person jointly with Power of Attorney holder
(v) Attachment 21: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII Order and MoP Order, if applicable
(w) Attachment 22: Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII Order and MoP Order, if applicable
(x) Attachment 23: Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA.
(y) Attachment 24: Declaration by the Bidder regarding events encountered pursuant to ITB Clause 2.1
(z) Attachment 25: Undertaking by the bidder regarding Compliance of DMI&SP policy
(aa) Attachment 26: Certification by the Bidder as per DoE Order in line with ITB Clause 2.1
(bb) Attachment 27: Bid Securing Declaration to be submitted by the Bidder.
(cc) Attachment 28: Undertaking regarding submission of original/Hard copy part of the bid
3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.
4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.
4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.
5.0 Construction of the Contract
5.1 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, In-transit insurance, unloading, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents. We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.
6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:
(a) GCC 2.14 Governing Law
(b) GCC 5 Contractor’s Responsibilities
(c) GCC 8 Terms of Payment
(d) GCC 9.3 Performance Security
(e) GCC 10 Taxes and Duties
(f) GCC 21.2 Completion Time Guarantee
(g) GCC 22 Defect Liability
(h) GCC 23 Functional Guarantee
(i) GCC 25 Patent Indemnity
(j) GCC 26 Limitation of Liability
(k) GCC 38 Settlement of Disputes
(l) GCC 39 Arbitration
(m) GCC 40 Conciliation
(n) Appendix 2 to Form of Contract Agreement Price Adjustment
Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.
7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.
8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.
9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.
10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.
11.0 We understand that you are not bound to accept the lowest or any bid you may receive.
12.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 2
13.0 We are a Micro and Small Enterprise (MSE) registered with , a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012, Notification dated 01/06/2020 read in conjuction with related notifications issued from time to time for such enterprises. 2
14.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : -- Printed Name :
Place : Designation :
In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him
#REF! Printed Name :
#REF! Designation :
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Package Name Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
Specification No. Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
1 Fill up only green shaded cells in Sch-1, Sch-2, Sch-3, Sch-4, Sch-7 and Bid Form 2nd Envelope.
2 All the cells in Sch-5 & Sch-6 are auto filled, therefore no cell is required to be filled up there.
3 Instructions / error messages, if any, will be displayed automatically after selecting the cell.
4 After filling up all the schedues, save the file, take print out of all the schedules and Bid form and sign & stamp and submit them as hard copy of the 2nd envelope (Price part) of the bid. Also ensure to submit the soft copy of the the same file on CD/ DVD.
पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
I While filling up the worksheets following may please be observed :
(i) Fill up only green shaded cells.
(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.
(iii) Select only the options provided in pull down menus.
(iv) Do not link any cell of this work book with any other work book.
(v) Do not use copy & paste or cut & paste options for filling up the data.
(vi) Do not reformat any of the cell of the work book.
II This Workbook consists of following worksheets :
Opening page of the workbook.
Names of Bidder :
● Select Sole Bidder or JV (Joint Venture) from the pull down menu. Do not leave this cell blank.
● Select nos. of the JV Partners other than the Lead Partner from drop down menu.
● In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.
● Fill up names and address of the Sole Bidder and /or Joint Venture.
● Fill up date in dd-mmm-yyyy format from drop down menu.
● Click for Sch-1 given at the right top of the worksheet to go to Sch-1.
Sch-1 (Ex-works Prices) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Corresponding cell for mode of transaction shall be come enable only after filling up the unit rate, therefore first fill up the unit rate and then mode of transaction for the corresponding item.
● Select either Direct or Bought-out from the drop down menu. Do not leave the cell blank the same shall be deemed to be Bought-out if the cell is left blank.
● Total amount shall get calculated automatically.
● Type Test charges shall appear automatically after filling up Sch-7 appropriately.
Sch-2 (Freight & Insurance Charges) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
Sch-3 (Erection Charges) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
Sch-4 (Training Charges) :
● Not applicable, hence no cell is required to be filled up.
Sch-4b (Maintenance Charges during and after Defect Liability Period) :
● Not applicable, hence no cell is required to be filled up.
Sch-5 (Summary of Taxes and Duties applicable on the Goods) :
● No cell is required to be filled in by the bidder in this worksheet.
● Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.
● No cell is required to be filled in by the bidder in this worksheet.
Sch-7 (Type Test Charges) :
● Fill up the rates & location where type tests are proposed.
● Total of this Sch-7 shall automatically appear in Sch-1.
Bid from 2nd Envelope :
● Fill up ref. no. as bidder's ref no. of this letter.
● This letter shall consider the net price as per Sch-6 (After Discount).
● Fill up names & Designation of the representatives of other JV partner(s) if the bidder is JV (Joint Venture) .
● Fill up additional information as required.
Happy Bidding !
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Sole Bidder 1 Sole Bidder 1
Joint Venture 2 or More JV (Joint Venture) 2 or More
Enter following details of the bidder
Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 1 0 Sole Bidder 1 0
Name of Sole Bidder …….. …….. …….. …….. …….. ……..
Address of Sole Bidder …….. …….. …….. …….. …….. ……..
Name of other Partner - 1
Address of other Partner - 1
Name of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..
Address of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..
email ID of Bid Signatory
Mobile No. of Bid Signatory
Tel No. of Bid Signatory
Fax No. of Bid Signatory
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 1 Schedule - 1 Direct Total 0 Sole Bidder `
BO Total #REF! 0
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
PLANT AND EQUIPMENT (INCLUDING MANDATORY SPARES PARTS) TO BE SUPPLIED, INCLUDING TYPE TEST CHARGES FOR TESTS TO BE CONDUCTED Direct
All Prices are in Indian Rupees. Bought-Out
SI. No. PR No PR Line Item No Activity Description Material Code HSN Code Whether HSN in column ‘ 6 ’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable (in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Item Description Unit Qty. Unit Ex-works price (excluding GST) Total Ex-works price (excluding GST) GST Tax as confirmed by Bidder
PART A (Substation Portion)
I SUPPLY ITEMS Revaluation of J column Tax Calculation
1 18 245kV, 2500A, 50KA Circuit Breaker (3-Phase) with support structure EA 18 Included 0.00 0 0.00
2 18 245 kV, 2500A, 50KA, 1-Phase Current Transformer with 150% extended EA 54 Included 0.00 0 0.00
3 18 245 kV,1600A, 40 KA, HCB tandom Isolator without E/s EA 16 Included 0.00 0 0.00
4 18 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with one E/S EA 12 Included 0.00 0 0.00
5 18 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with two E/S EA 13 Included 0.00 0 0.00
6 18 216kV Surge Arrester (1-phase) EA 9 Included 0.00 0 0.00
7 18 245 kV, 4400pf Capacitive Voltage Transformer (1- Phase) EA 25 Included 0.00 0 0.00
8 18 ACSR MOOSE CONDUCTOR MTRS. 2400 Included 0.00 0 0.00
9 18 4" EH IPS AL TUBE MTRS. 1600 Included 0.00 0 0.00
10 18 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 312 Included 0.00 0 0.00
11 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 120 Included 0.00 0 0.00
12 18 TERMINAL CONNECTOR ON 216kV LA TO SUIT TWIN `MOOSE' ACSR EA 24 Included 0.00 0 0.00
13 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 24 Included 0.00 0 0.00
14 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 24 Included 0.00 0 0.00
15 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 48 Included 0.00 0 0.00
16 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 32 Included 0.00 0 0.00
17 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 64 Included 0.00 0 0.00
18 18 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 48 Included 0.00 0 0.00
19 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
20 18 TERMINAL CONNECTOR ON 245kV CT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 24 Included 0.00 0 0.00
21 18 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 48 Included 0.00 0 0.00
22 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 48 Included 0.00 0 0.00
23 18 TERMINAL CONNECTOR ON 245 kV CVT TO SUIT TWIN MOOSE ACSR EA 24 Included 0.00 0 0.00
24 18 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 8 Included 0.00 0 0.00
25 18 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 144 Included 0.00 0 0.00
26 18 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 96 Included 0.00 0 0.00
27 18 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 192 Included 0.00 0 0.00
28 18 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 8 Included 0.00 0 0.00
29 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 24 Included 0.00 0 0.00
30 18 220KV BMK EA 8 Included 0.00 0 0.00
31 18 220KV CT JB EA 8 Included 0.00 0 0.00
32 18 220KV CVT JB EA 12 Included 0.00 0 0.00
33 18 ACSR MOOSE CONDUCTOR MTRS. 5000 Included 0.00 0 0.00
34 18 4" EH IPS AL TUBE MTRS. 800 Included 0.00 0 0.00
35 18 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 800 Included 0.00 0 0.00
36 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 60 Included 0.00 0 0.00
37 18 TERMINAL CONNECTOR ON 216kV LA TO SUIT TWIN `MOOSE' ACSR (THRU TYPE) EA 12 Included 0.00 0 0.00
38 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 12 Included 0.00 0 0.00
39 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 12 Included 0.00 0 0.00
40 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
41 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 16 Included 0.00 0 0.00
42 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 32 Included 0.00 0 0.00
43 18 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
44 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
45 18 TERMINAL CONNECTOR ON 245kV CT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 12 Included 0.00 0 0.00
46 18 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
47 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 24 Included 0.00 0 0.00
48 18 TERMINAL CONNECTOR ON 220kV (LV) SIDE OF 500MVA ICT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 12 Included 0.00 0 0.00
49 18 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 4 Included 0.00 0 0.00
50 18 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 72 Included 0.00 0 0.00
51 18 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included 0.00 0 0.00
52 18 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 96 Included 0.00 0 0.00
53 18 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 4 Included 0.00 0 0.00
54 18 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 72 Included 0.00 0 0.00
55 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included 0.00 0 0.00
56 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND THROUGH CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included 0.00 0 0.00
57 18 220KV BMK EA 4 Included 0.00 0 0.00
58 18 220KV CT JB EA 4 Included 0.00 0 0.00
59 18 ACSR MOOSE CONDUCTOR MTRS. 600 Included 0.00 0 0.00
60 18 4" EH IPS AL TUBE MTRS. 400 Included 0.00 0 0.00
61 18 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 40 Included 0.00 0 0.00
62 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included 0.00 0 0.00
63 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB (1600A) TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
64 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB (1600A) TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
65 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
66 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 8 Included 0.00 0 0.00
67 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 10 Included 0.00 0 0.00
68 18 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
69 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
70 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
71 18 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
72 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
73 18 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 2 Included 0.00 0 0.00
74 18 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 36 Included 0.00 0 0.00
75 18 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 24 Included 0.00 0 0.00
76 18 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included 0.00 0 0.00
77 18 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 8 Included 0.00 0 0.00
78 18 220KV BMK EA 2 Included 0.00 0 0.00
79 18 220KV CT JB EA 2 Included 0.00 0 0.00
80 18 ACSR MOOSE CONDUCTOR MTRS. 600 Included 0.00 0 0.00
81 18 4" EH IPS AL TUBE MTRS. 400 Included 0.00 0 0.00
82 18 RIGID SPACERS TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 60 Included 0.00 0 0.00
83 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included 0.00 0 0.00
84 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
85 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
86 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
87 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 4 Included 0.00 0 0.00
88 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 8 Included 0.00 0 0.00
89 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
90 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
91 18 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND QUAD MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 16 Included 0.00 0 0.00
92 18 RIGID TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 18 Included 0.00 0 0.00
93 18 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 72 Included 0.00 0 0.00
94 18 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 16 Included 0.00 0 0.00
95 18 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 12 Included 0.00 0 0.00
96 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 6 Included 0.00 0 0.00
97 18 220KV BMK EA 2 Included 0.00 0 0.00
98 18 220KV CT JB EA 2 Included 0.00 0 0.00
99 18 ACSR MOOSE CONDUCTOR MTRS. 600 Included 0.00 0 0.00
100 18 4" EH IPS AL TUBE MTRS. 400 Included 0.00 0 0.00
101 18 RIGID SPACERS TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 60 Included 0.00 0 0.00
102 18 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included 0.00 0 0.00
103 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
104 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included 0.00 0 0.00
105 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included 0.00 0 0.00
106 18 TERMINAL CONNECTOR ON 245kV ISO TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 12 Included 0.00 0 0.00
107 18 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
108 18 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included 0.00 0 0.00
109 18 PG CLAMP TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included 0.00 0 0.00
110 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included 0.00 0 0.00
111 18 220KV BMK EA 2 Included 0.00 0 0.00
112 18 220KV CT JB EA 2 Included 0.00 0 0.00
113 18 ACSR MOOSE CONDUCTOR MTRS. 10500 Included 0.00 0 0.00
114 18 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 36 Included 0.00 0 0.00
115 18 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND THROUGH CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included 0.00 0 0.00
116 18 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 72 Included 0.00 0 0.00
117 18 TERMINAL CONNECTOR ON 245 kV CVT TO SUIT TWIN MOOSE ACSR NOS. 12 Included 0.00 0 0.00
118 18 220KV CVT JB NOS. 4 Included 0.00 0 0.00
119 18 420kV, 3150A, 50KA, Isolator (3-phase) (Double Break) with one E/S EA 8 Included 0.00 0 0.00
120 18 220kV Circuit Breaker Relay Panel without Auto Reclose (with Automation) EA 10 Included 0.00 0 0.00
121 18 220kV Circuit Breaker Relay Panel with Auto Reclose (with Automation) EA 8 Included 0.00 0 0.00
122 18 220kV Line Protection Panel (with Automation) EA 8 Included 0.00 0 0.00
123 18 Complete Substation automation System for 220kV bay as per Technical Specification EA 19 Included 0.00 0 0.00
124 18 Spares-Relay & protection Panels (with automation) LS 1 Included 0.00 0 0.00
125 18 Spares-Substation Automation System LS 1 Included 0.00 0 0.00
126 18 Spare-245kV Circuit Breaker LOT 1 Included 0.00 0 0.00
127 18 Spare-245kV Capacitive Voltage Transformer (1- Phase) LOT 1 Included 0.00 0 0.00
128 18 Spare-245kV Isolator LOT 1 Included 0.00 0 0.00
129 18 Spare-245kV CT LOT 1 Included 0.00 0 0.00
130 18 Spare-216kV Surge Arrester LOT 1 Included 0.00 0 0.00
131 1.1kV grade Control Cables (PVCinsulated) along withlugs,glands,straight joints &accessories,etc. 0.00 0 0.00
132 18 1.1KV GRADE 5CX2.5 SQMM CONTROL CABLE KM 20.5 Included 0.00 0 0.00
133 18 1.1KV GRADE 7CX2.5 SQMM CONTROL CABLE KM 2 Included 0.00 0 0.00
134 18 1.1KV GRADE 10CX2.5 SQMM CONTROL CABLE KM 3 Included 0.00 0 0.00
135 18 1.1KV GRADE 14CX2.5 SQMM CONTROL CABLE KM 7.5 Included 0.00 0 0.00
136 18 1.1KV GRADE 19CX2.5 SQMM CONTROL CABLE KM 1.5 Included 0.00 0 0.00
137 18 1.1KV GRADE 27CX2.5 SQMM CONTROL CABLE KM 1.5 Included 0.00 0 0.00
138 1.1kV grade Power Cables (PVCinsulated)along with lugs,glands,straight LS joints & accessories,etc 0.00 0 0.00
139 18 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE KM 9 Included 0.00 0 0.00
140 18 1.1KV GRADE 3.5CX35 SQMM (PVC) POWER CABLE KM 2 Included 0.00 0 0.00
141 18 1.1KV GRADE 4CX16 SQMM (PVC) POWER CABLE KM 14.5 Included 0.00 0 0.00
142 18 1.1KV Grade 2Cx6 Sqmm Armoured (PVC)Power Cable KM 2.5 Included 0.00 0 0.00
143 18 1.1KV Grade 4Cx6 Sqmm Armoured (PVC)Power Cable KM 4.5 Included 0.00 0 0.00
144 18 Air conditioning system for Switchyard Panel Room of 6m length Set 6 Included 0.00 0 0.00
145 18 Fire Detection and Alarm System for Switchyard Panel Room of 6 m length Set 6 Included 0.00 0 0.00
146 18 Illumination System for switchyard panel room of 6 m length No 6 Included 0.00 0 0.00
147 18 4.5 Kg CO2 type potable fire extinguisher No 12 Included 0.00 0 0.00
Total Ex-works Price 0.00 0.00
Total Type Test charges as per Schedule-7 0.00
Total Ex-works Price including Type Test charges 0.00
Total GST Tax as confirmed by Bidder 0.00
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
* In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 1 Direct Total 0 Sole Bidder `
BO Total #REF! 0
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES : EX-WORKS PRICES)
Bidder’s Name and Address (Sole Bidder) : To:
Contract Services
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Plant and Equipment (including Mandatory Spares Parts) to be supplied, including Type Test Charges for Tests to be conducted. Direct
All Prices are in Indian Rupees. Bought-Out
SI. No. Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct / Bought-out)
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
Total Ex-Works Price Direct 0.00 Direct
Total Ex-Works Price Bought Out 0.00
Total Ex-Works Price 0.00
Total Type Test charges as per Schedule-7 #REF! #REF! #REF!
Total Ex-works Price including Type Test charges #REF! #REF! #REF!
Discount Sch-1 #REF! MPD Sch-1 #REF!
Dis Alert #REF!
Note : Specify amount of Excise Duty, Sales Tax/'VAT and other taxes payable on the transaction between the Contractor and the Employer and octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items (to be identified in the Contract), which shall be dispatched directly from the sub-vendor’s works to the Employer’s site (sale-in-transit), separately in Schedule-5. Excise Duty, Sales tax and other levies for all the bought-out items are to be included in the EXW Price (Col. No. 5) only and not to be indicated in Schedule-5.
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 2
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
LOCAL TRANSPORTATION, IN-TRANSIT INSURANCE, LOADING AND UNLOADING
All Prices are in Indian Rupees.
SI. No. PR No PR Line Item No Activity Description Material Code Description Unit Quantity Unit Freight, In-transit Insurance, loading & unloading Charges Total Freight, In-transit Insurance, loading & unloading Charges
PART A (Substation Portion)
1 245kV, 2500A, 50KA Circuit Breaker (3-Phase) with support structure EA 18 Included
2 245 kV, 2500A, 50KA, 1-Phase Current Transformer with 150% extended EA 54 Included
3 245 kV,1600A, 40 KA, HCB tandom Isolator without E/s EA 16 Included
4 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with one E/S EA 12 Included
5 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with two E/S EA 13 Included
6 216kV Surge Arrester (1-phase) EA 9 Included
7 245 kV, 4400pf Capacitive Voltage Transformer (1- Phase) EA 25 Included
8 ACSR MOOSE CONDUCTOR MTRS. 2400 Included
9 4" EH IPS AL TUBE MTRS. 1600 Included
10 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 312 Included
11 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 120 Included
12 TERMINAL CONNECTOR ON 216kV LA TO SUIT TWIN `MOOSE' ACSR EA 24 Included
13 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 24 Included
14 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 24 Included
15 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 48 Included
16 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 32 Included
17 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 64 Included
18 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 48 Included
19 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 24 Included
20 TERMINAL CONNECTOR ON 245kV CT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 24 Included
21 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 48 Included
22 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 48 Included
23 TERMINAL CONNECTOR ON 245 kV CVT TO SUIT TWIN MOOSE ACSR EA 24 Included
24 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 8 Included
25 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 144 Included
26 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 96 Included
27 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 192 Included
28 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 8 Included
29 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 24 Included
30 220KV BMK EA 8 Included
31 220KV CT JB EA 8 Included
32 220KV CVT JB EA 12 Included
33 ACSR MOOSE CONDUCTOR MTRS. 5000 Included
34 4" EH IPS AL TUBE MTRS. 800 Included
35 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 800 Included
36 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 60 Included
37 TERMINAL CONNECTOR ON 216kV LA TO SUIT TWIN `MOOSE' ACSR (THRU TYPE) EA 12 Included
38 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 12 Included
39 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 12 Included
40 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 24 Included
41 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 16 Included
42 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 32 Included
43 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 24 Included
44 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 12 Included
45 TERMINAL CONNECTOR ON 245kV CT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 12 Included
46 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 24 Included
47 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 24 Included
48 TERMINAL CONNECTOR ON 220kV (LV) SIDE OF 500MVA ICT TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 12 Included
49 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 4 Included
50 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 72 Included
51 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included
52 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 96 Included
53 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 4 Included
54 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 72 Included
55 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included
56 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND THROUGH CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included
57 220KV BMK EA 4 Included
58 220KV CT JB EA 4 Included
59 ACSR MOOSE CONDUCTOR MTRS. 600 Included
60 4" EH IPS AL TUBE MTRS. 400 Included
61 RIGID SPACERS TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 40 Included
62 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included
63 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB (1600A) TO SUIT 4" IPS Al. TUBE EA 6 Included
64 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB (1600A) TO SUIT 4" IPS Al. TUBE EA 6 Included
65 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included
66 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 8 Included
67 TERMINAL CONNECTOR ON 245kV ISO TO SUIT TWIN MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 10 Included
68 RIGID (THRU) TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 6 Included
69 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
70 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
71 RIGID/SLIDING TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 12 Included
72 EXPANSION TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 12 Included
73 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND TWIN MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 2 Included
74 PG CLAMP TO SUIT SINGLE MOOSE ACSR TO SINGLE MOOSE ACSR EA 36 Included
75 TEE CONNECTOR TO SUIT TWIN MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 24 Included
76 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included
77 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 8 Included
78 220KV BMK EA 2 Included
79 220KV CT JB EA 2 Included
80 ACSR MOOSE CONDUCTOR MTRS. 600 Included
81 4" EH IPS AL TUBE MTRS. 400 Included
82 RIGID SPACERS TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 60 Included
83 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included
84 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included
85 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included
86 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included
87 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 4 Included
88 TERMINAL CONNECTOR ON 245kV ISO TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 8 Included
89 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
90 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
91 INTERCONNECTOR TO SUIT 4" IPS Al. TUBE AND QUAD MOOSE ACSR WITH 250mm SUB-CONDUCTOR SPACING EA 16 Included
92 RIGID TYPE TERMINAL CONNECTOR ON 245 kV BPI TO SUIT 4" IPS AL. TUBE EA 18 Included
93 TEE CONNECTOR TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 72 Included
94 CORONA BELL SUITABLE FOR 4" IPS AL. TUBE EA 16 Included
95 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 12 Included
96 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 6 Included
97 220KV BMK EA 2 Included
98 220KV CT JB EA 2 Included
99 ACSR MOOSE CONDUCTOR MTRS. 600 Included
100 4" EH IPS AL TUBE MTRS. 400 Included
101 RIGID SPACERS TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING EA 60 Included
102 WELDING SLEEVES TO SUIT 4" IPS AL TUBE EA 30 Included
103 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included
104 RIGID TYPE TERMINAL CONNECTOR ON 245kV CB TO SUIT 4" IPS Al. TUBE EA 6 Included
105 RIGID TYPE TERMINAL CONNECTOR ON 245kV ISO TO SUIT 4" IPS AL. TUBE EA 12 Included
106 TERMINAL CONNECTOR ON 245kV ISO TO SUIT QUAD MOOSE ACSR WITH 250mm SUB CONDUCTOR SPACING (HA) EA 12 Included
107 EXPANSION TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
108 RIGID TYPE TERMINAL CONNECTOR ON 245kV CT TO SUIT 4" IPS AL. TUBE EA 6 Included
109 PG CLAMP TO SUIT SINGLE MOOSE ACSR ON MAIN WAYS TO SINGLE MOOSE ACSR ON BRANCH WAYS WITH 250mm SUB CONDUCTOR SPACING EA 48 Included
110 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND DROP CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included
111 220KV BMK EA 2 Included
112 220KV CT JB EA 2 Included
113 ACSR MOOSE CONDUCTOR MTRS. 10500 Included
114 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 36 Included
115 245kV SINGLE SUSPENSION STRING INSULATOR ASSEMBLY WITH SINGLE ANCHORING POINTS SUITABLE FOR 1 No. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND THROUGH CLAMP SET SUITABLE FOR TWIN MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING Set 12 Included
116 245kV DOUBLE TENSION STRING INSULATOR ASSEMBLY WITH DOUBLE ANCHORING POINTS SUITABLE FOR 2 Nos. COMPOSITE LONG ROD INSULATOR PER STRING WITH ALL HARDWARE ACCESSORIES INCLUDING CORONA RING AND TENSION CLAMP SET SUITABLE FOR QUAD MOOSE ACSR BUNDLE WITH 250mm SUB-CONDUCTOR SPACING WITH TURN BUCKLE Set 72 Included
117 TERMINAL CONNECTOR ON 245 kV CVT TO SUIT TWIN MOOSE ACSR NOS. 12 Included
118 220KV CVT JB NOS. 4 Included
119 420kV, 3150A, 50KA, Isolator (3-phase) (Double Break) with one E/S EA 8 Included
120 220kV Circuit Breaker Relay Panel without Auto Reclose (with Automation) EA 10 Included
121 220kV Circuit Breaker Relay Panel with Auto Reclose (with Automation) EA 8 Included
122 220kV Line Protection Panel (with Automation) EA 8 Included
123 Complete Substation automation System for 220kV bay as per Technical Specification EA 19 Included
124 Spares-Relay & protection Panels (with automation) LS 1 Included
125 Spares-Substation Automation System LS 1 Included
126 Spare-245kV Circuit Breaker LOT 1 Included
127 Spare-245kV Capacitive Voltage Transformer (1- Phase) LOT 1 Included
128 Spare-245kV Isolator LOT 1 Included
129 Spare-245kV CT LOT 1 Included
130 Spare-216kV Surge Arrester LOT 1 Included
131 1.1kV grade Control Cables (PVCinsulated) along withlugs,glands,straight joints &accessories,etc.
132 1.1KV GRADE 5CX2.5 SQMM CONTROL CABLE KM 20.5 Included
133 1.1KV GRADE 7CX2.5 SQMM CONTROL CABLE KM 2 Included
134 1.1KV GRADE 10CX2.5 SQMM CONTROL CABLE KM 3 Included
135 1.1KV GRADE 14CX2.5 SQMM CONTROL CABLE KM 7.5 Included
136 1.1KV GRADE 19CX2.5 SQMM CONTROL CABLE KM 1.5 Included
137 1.1KV GRADE 27CX2.5 SQMM CONTROL CABLE KM 1.5 Included
138 1.1kV grade Power Cables (PVCinsulated)along with lugs,glands,straight LS joints & accessories,etc
139 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE KM 9 Included
140 1.1KV GRADE 3.5CX35 SQMM (PVC) POWER CABLE KM 2 Included
141 1.1KV GRADE 4CX16 SQMM (PVC) POWER CABLE KM 14.5 Included
142 1.1KV Grade 2Cx6 Sqmm Armoured (PVC)Power Cable KM 2.5 Included
143 1.1KV Grade 4Cx6 Sqmm Armoured (PVC)Power Cable KM 4.5 Included
144 Air conditioning system for Switchyard Panel Room of 6m length Set 6 Included
145 Fire Detection and Alarm System for Switchyard Panel Room of 6 m length Set 6 Included
146 Illumination System for switchyard panel room of 6 m length No 6 Included
147 4.5 Kg CO2 type potable fire extinguisher No 12 Included
Total F&I Price 0.00
Place: Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 2 Dis
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0
(SCHEDULE OF RATES AND PRICES : FREIGHT & INSURANCE CHARGES) AS per Percent #REF!
As per lum-sum on Sch-2 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-2 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage Discount 0.00%
All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
SI. No. Description Unit Quantity Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
Total F&I Price #REF!
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 3
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!
As per lum-sum on Sch-3 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-3 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage lum-sum 0.00%
INSTALLATION CHARGES Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
All Prices are in Indian Rupees.
SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Erection Charges Total Erection Charges Total GST as confirmed by Bidder Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges
PART A (Substation Portion)
I INSTALLATION Revaluation of J column Tax Calculation
1 18 245kV, 2500A, 50KA Circuit Breaker (3-Phase) with support structure EA 18 Included 0.00 0 0
2 18 Dismantling of existing Circuit Breaker EA 18 Included 0.00 0 0
3 18 245 kV, 2500A, 50KA, 1-Phase Current Transformer with 150% extended EA 54 Included 0.00 0 0
4 18 Dismantling of existing 1-Phase Current Transformer EA 54 Included 0.00 0 0
5 18 245 kV,1600A, 40 KA, HCB tandom Isolator without E/s EA 16 Included 0.00 0 0
6 18 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with one E/S EA 12 Included 0.00 0 0
7 18 245kV, 2500A, 40 KA, 3-phase Double Break Isolator with two E/S EA 13 Included 0.00 0 0
8 18 Dismantling of existing Isolator EA 41 Included 0.00 0 0
9 18 216kV Surge Arrester (1-phase) EA 9 Included 0.00 0 0
10 18 Dismantling of existing Surge Arrester EA 9 Included 0.00 0 0
11 18 245 kV, 4400pf Capacitive Voltage Transformer (1- Phase) EA 25 Included 0.00 0 0
12 18 Dismantling of existing Capacitive Voltage Transformer (1- Phase) EA 25 Included 0.00 0 0
13 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Line Bay EA 8 Included 0.00 0 0
14 18 Dismantling of existing erection Hardware(include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Line Bay EA 8 Included 0.00 0 0
15 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc)for 220kV layout (Double Main and Transfer Scheme) Transformer Bay EA 4 Included 0.00 0 0
16 18 Dismantling of existing Erection Hardware(include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme) Transformer Bay EA 4 Included 0.00 0 0
17 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc)for 220kV layout (Double Main and Transfer Scheme) Transfer Bus Coupler Bay EA 2 Included 0.00 0 0
18 18 Dismantling of existing Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme) Transfer Bus Coupler Bay EA 2 Included 0.00 0 0
19 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus Coupler Bay EA 2 Included 0.00 0 0
20 18 Dismantling of existing Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus Coupler Bay EA 2 Included 0.00 0 0
21 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus section Bay as per technical specification EA 2 Included 0.00 0 0
22 18 Dismantling of Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus section Bay as per technical specification EA 2 Included 0.00 0 0
23 18 Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc) for 220kV layout (Double Main and Transfer Scheme)-Bus work (three Bay) as per technical specification SET 6 Included 0.00 0 0
24 18 Dismantling of Erection Hardware (include-Insulator strings, Disc Insulators, Hardware, conductor, Al tube, bus-bar materials, cable trays, BMK, clamps, spacers, connectors including equipment connectors, CT/CVT Junction box, etc)for 220kV layout (Double Main and Transfer Scheme)-Bus work (three Bay) as per technical specification SET 6 Included 0.00 0 0
25 18 420kV, 3150A, 50KA, Isolator (3-phase) (Double Break) with one E/S EA 8 Included 0.00 0 0
26 18 Dismantling of existing 420kV Isolator (3-phase) EA 8 Included 0.00 0 0
27 18 220kV Circuit Breaker Relay Panel without Auto Reclose (with Automation) EA 10 Included 0.00 0 0
28 18 220kV Circuit Breaker Relay Panel with Auto Reclose (with Automation) EA 8 Included 0.00 0 0
29 18 220kV Line Protection Panel (with Automation) EA 8 Included 0.00 0 0
30 18 Dismantling of existing 220kV Circuit Breaker Relay Panel without Auto Reclose EA 10 Included 0.00 0 0
31 18 Dismantling of existing 220kV Circuit Breaker Relay Panel with Auto Reclose EA 8 Included 0.00 0 0
32 18 Dismantling of existing 220kV Line Protection Panel EA 8 Included 0.00 0 0
33 18 Complete Substation automation System for 220kV bay as per Technical Specification EA 19 Included 0.00 0 0
34 1.1kV grade Control Cables (PVCinsulated) along withlugs,glands,straight joints &accessories,etc. 0 0
35 18 1.1KV GRADE 5CX2.5 SQMM CONTROL CABLE KM 20.5 Included 0.00 0 0
36 18 1.1KV GRADE 7CX2.5 SQMM CONTROL CABLE KM 2 Included 0.00 0 0
37 18 1.1KV GRADE 10CX2.5 SQMM CONTROL CABLE KM 3 Included 0.00 0 0
38 18 1.1KV GRADE 14CX2.5 SQMM CONTROL CABLE KM 7.5 Included 0.00 0 0
39 18 1.1KV GRADE 19CX2.5 SQMM CONTROL CABLE KM 1.5 Included 0.00 0 0
40 18 1.1KV GRADE 27CX2.5 SQMM CONTROL CABLE KM 1.5 Included 0.00 0 0
41 1.1kV grade Power Cables (PVCinsulated)along with lugs,glands,straight LS joints & accessories,etc 0 0
42 18 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE KM 9 Included 0.00 0 0
43 18 1.1KV GRADE 3.5CX35 SQMM (PVC) POWER CABLE KM 2 Included 0.00 0 0
44 18 1.1KV GRADE 4CX16 SQMM (PVC) POWER CABLE KM 14.5 Included 0.00 0 0
45 18 1.1KV Grade 2Cx6 Sqmm Armoured (PVC)Power Cable KM 2.5 Included 0.00 0 0
46 18 1.1KV Grade 4Cx6 Sqmm Armoured (PVC)Power Cable KM 4.5 Included 0.00 0 0
47 18 Augmentation of existing 220kV bus bar protection scheme.(No. of bays as perspecification)-(with Automation)(shifting,testing and commissioning) EA 19 Included 0.00 0 0
48 18 Existing DTPC panles shifting,testing and commissioning EA 8 Included 0.00 0 0
49 18 Air conditioning system for Switchyard Panel Room of 6m length Set 6 Included 0.00 0 0
50 18 Fire Detection and Alarm System for Switchyard Panel Room of 6 m length Set 6 Included 0.00 0 0
51 18 Illumination System for switchyard panel room of 6 m length No 6 Included 0.00 0 0
52 18 4.5 Kg CO2 type potable fire extinguisher No 12 Included 0.00 0 0
II CIVIL WORKS Revaluation of J column Tax Calculation
1 18 220 kV Panel Room - Civil Works. All civil works as per drawing and specifications complete, including - brickwork, finishing (external and internal), windows etc.However,excavation, PCC, RCC and reinforcement shall be paid separately as per BPS. Sqm 180 Included 0.00 0 0
2 18 Cable Trench including all types of crossings, all metallic works and sump pit including concrte, form work and reinforcement steel Section 1-1 M 290 Included 0.00 0 0
3 18 Cable Trench including all types of crossings, all metallic works and sump pit including concrte, form work and reinforcement steel Section 2-2 M 380 Included 0.00 0 0
4 18 Cable Trench including all types of crossings, all metallic works and sump pit including concrte, form work and reinforcement steel Section 3-3 M 352 Included 0.00 0 0
5 18 Cable Trench including all types of crossings, all metallic works and sump pit including concrte, form work and reinforcement steel Section 4-4 M 350 Included 0.00 0 0
III CIVIL WORKS (DSR) Revaluation of J column Tax Calculation
1 18 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and rammingof bottoms, lift upto 1.5 m, including getting out the excavated soiland disposal of surplus excavated soil as directed, within a lead of 50m. Cum 195 Included 0.00 0 0
2 18 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) CU.M 20 Included 0.00 0 0
3 18 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) CU.M 61 Included 0.00 0 0
4 18 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) CU.M 12 Included 0.00 0 0
5 18 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Cum 39 Included 0.00 0 0
6 18 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete Sq.M 120 Included 0.00 0 0
7 18 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform Sq.M 600 Included 0.00 0 0
8 18 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Sq.M 120 Included 0.00 0 0
9 18 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts Sq.M 120 Included 0.00 0 0
10 18 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically Treated bars kg 8300 Included 0.00 0 0
Total Installation Charges 0.00 0 0
Total GST as confirmed by Bidder 0.00
* In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 3
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES : ERECTION CHARGES) AS per Percent #REF!
As per lum-sum on Sch-3 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-3 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage lum-sum 0.00%
All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
SI. No. Description Unit Quantity Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! (a) Detailed Soil Investigation
#REF! #REF! #REF! #REF! #REF! (b) All kinds of soil except fissured rock & hard rock
#REF! #REF! #REF! #REF! #REF! (e) River Crossing Location
#REF! #REF! #REF! #REF! #REF! (f)
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
Total Erection Price (A+B) #REF!
Place : Printed Name :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 4
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES )
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Training Charges for Training to be imparted
SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Training Charges excluding GST Total Training Charges excluding GST Total GST as confirmed by Bidder
Revaluation of J column Tax Calculation
NOT APPLICABLE Revaluation of J column Tax Calculation
Included 0.00 0 0
Total Training Charges 0.00 0
Total GST as confirmed by Bidder 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 4b
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SCHEDULE OF RATES AND PRICES )
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Maintenance Charges during & after Defect Laibility Period
SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Maintenance Charges excluding GST Total Maintenance Charges excluding GST Total GST as confirmed by Bidder
0 Revaluation of P column Tax Calculation
A. #REF! Revaluation of P column Tax Calculation
1 Included 0.00 0 0
2 Included 0.00 0 0
3 Included 0.00 0 0
4 Included 0.00 0 0
B. #REF! Revaluation of P column Tax Calculation
1 Included 0.00 0 0
2 Included 0.00 0 0
3 Included 0.00 0 0
4 Included 0.00 0 0
Total Maintenance Charges during and after Defect Liabilty Period 0.00 0
Total GST as confirmed by Bidder 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 5
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(SUMMARY OF TAXES & DUTIES APPLICABLE ON PLANT & EQUIPMENT)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Sl. No. Item Nos. Total Price (INR) After Discount After MPDiscount
1 TOTAL GST ON GOODS Excise Duty #REF! Excise Duty #REF!
Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable. 0.00
2 TOTAL GST ON SERVICES Sales Tax 0.00 Sales Tax 0.00
Total GST on Installation Services (Schedule-3), Training to be imparted in India (Schedule-4) 0.00 #REF! 0 #REF! 0
GRAND TOTAL [1+2] 0.00 Grand Total after Discount #REF! Grand Total after MPD #REF!
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 5
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
SUMMARY OF TAXES & DUTIES APPLICABLE ON GOODS
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Sl. No. Item Nos. Total Price (INR)
1 TOTAL GST ON GOODS 0.00
Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable.
2 TOTAL GST ON SERVICES 0.00
Total GST on Installation Services (Schedule-3), Training to be imparted in India (Schedule-4a) and Maintenance Charges during and after Defect Liabilty Period (Schedule-4b)
GRAND TOTAL [1+2] 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 6
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(GRAND SUMMARY)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Sl. No. Description Total Price (INR)
1 TOTAL SCHEDULE NO. 1 0.00
Ex-works price of Plant and Equipment including Type Test Charges
2 TOTAL SCHEDULE NO. 2 0.00
Local Transportation, In-transit Insurance, loading & unloading
3 TOTAL SCHEDULE NO. 3 0.00
Installation Charges
4 TOTAL SCHEDULE NO. 4 0.00
Training Charges
4b TOTAL SCHEDULE NO. 4b 0.00
Maintenance Charges during & after Defect Laibility Period
5 TOTAL SCHEDULE NO. 5 0.00
Taxes and Duties
6 TOTAL SCHEDULE NO. 7 0.00
Type Test Charges [Total of this Schedule is included in Schedule - 1 above.]
GRAND TOTAL [1+2+3+4+5] 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule - 6 After Discount
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
(GRAND SUMMARY)
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
Sl. No. Description Total Price (INR)
1 TOTAL SCHEDULE NO. 1 0.00
Ex-works price of Plant and Equipment including Type Test Charges
2 TOTAL SCHEDULE NO. 2 0.00
Local Transportation, In-transit Insurance, loading & unloading
3 TOTAL SCHEDULE NO. 3 0.00
Installation Charges
4 TOTAL SCHEDULE NO. 4 0.00
Training Charges
4b TOTAL SCHEDULE NO. 4b 0.00
Maintenance Charges during & after Defect Laibility Period
5 TOTAL SCHEDULE NO. 5 0.00
Taxes and Duties
6 TOTAL SCHEDULE NO. 7 0.00
Type Test Charges [Total of this Schedule is included in Schedule - 1 above.]
GRAND TOTAL [1+2+3+4+5] 0.00
Date : -- Printed Name :
Place : Designation :
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Schedule 7
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!
As per lum-sum on Sch-7 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-7 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage Discount 0.0000%
Type tests on Earthwire, Hardwar Fittings & accessories of conductor & earthwire:
SL. NO. PR No Line Item No Code HSN Code Whether HSN in column ‘2’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total GST as confirmed by Bidder Revaluation of M column Tax Calculation Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)
1 Included 0.00 0 0.00
2 Included 0.00 0 0.00
TOTAL TYPE TEST CHARGES 0.00
Total GST as confirmed by Bidder 0.00
Date : -- Printed Name :
Place : Designation :
Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation 0 0
(SCHEDULE OF RATES AND PRICES ) 0 0
Bidder’s Name and Address (Sole Bidder) :
SL. NO. Description of Test #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) AS per Percent #REF!
As per lum-sum on Sch-7 0.00%
Bidder’s Name and Address (Sole Bidder) : To: As per Percent on Sch-7 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : …….. …….. …….. …….. …….. …….. Power Grid Corporation of India Ltd.,
Address : …….. …….. …….. …….. …….. …….. "Saudamini", Plot No.-2
…….. …….. …….. …….. …….. …….. Sector-29, Multipackage Discount 0.0000%
Type Tests on Earthwire
SL. NO. Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
Sub-Total (I) #REF!
TOTAL TEST CHARGES (I) #REF!
Discount Sche-7 #REF! MPD Sche-7 #REF!
Dis Alert #REF!
Date : -- Printed Name :
Place : Designation :
Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation 0 0 0
(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) 0 0 0
Bidder’s Name and Address (Sole Bidder) : 0
SL. NO. Description of Test 0
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Letter of Discount
LETTER OF DISCOUNT
Contract Services
Power Grid Corporation of India Ltd.,
"Saudamini", Plot No.-2
Sector-29, (near IFFCO Chowk)
Gurgaon (Haryana) - 122001
Subject : Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation
With reference to the subject tender, we hereby offer unconditional discount on the prices quoted by us as per details given here below : Eq Weightage of Rs/ % Final Discount Factor
1 Discount on lum-sum basis on total price quoted by us without Taxes & Duties. [The discount shall be proportionately applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2, Sch-3, Sch-4a, Sch-4b & Sch-7] In Rs. 0.00 0.0000000000%
2 Discount on percent basis on total price quoted by us without Taxes & Duties. [The discount shall be applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2 , Sch-3, Sch-4a, Sch-4b & Sch-7] In Percent (%) 0.00 0.00%
3 Discount on lum-sum basis on the Schedules as given below : [The discount shall be proportionately applicable on all the relevent items of the respective Schdules.] In Rs.
Schedule-1 : Ex works prices In Rs. 0.00 0.0000000000% Schedule-1 : Ex-Works Price 0.0000000000%
Schedule-2 : Freight & Insurance In Rs. 0.00 0.0000000000% Schedule-2 : Freight & Insurance 0.0000000000%
Schedule-3 : Erection Charges In Rs. 0.00 0.0000000000% Schedule-3 : Erection Charges 0.0000000000%
Schedule-4a : Training Charges In Rs. 0.00 0.0000000000% Schedule-4a : Training Charges 0.0000000000%
Schedule-4b : Maintenance Charges during and after DLP In Rs. 0.00 0.0000000000% Schedule-4b : Maintenance Charges 0.0000000000%
Schedule-7 : Type Test Charges In Rs. 0.00 0.0000000000% Schedule-7 : Type Test Charges 0.0000000000%
4 Discount on percent basis on the Schedules as given below : [The discount shall be applicable on all the relevent items of the respective Schdules.] In Percent (%)
Schedule-1 : Ex works prices In Percent (%) 0.00 0.00%
Schedule-2 : Freight & Insurance In Percent (%) 0.00 0.00%
Schedule-3 : Erection Charges In Percent (%) 0.00 0.00%
Schedule-4a : Training Charges In Percent (%) 0.00 0.00%
Schedule-4b : Maintenance Charges during and after DLP In Percent (%) 0.00 0.00%
Schedule-7 : Type Test Charges In Percent (%) 0.00 0.00%
Discount(s) offered at sl. No. 1 to 4 will get displayed and accounted for automatically in the respective items of the Schedules.
5 We hereby offer Multi-package discount as given below:
Multi-Package Discount(s) offered at sl. No. 5 will not get automatically accounted for in the respective items of the Schedules. The same shall be worked out saparately for evaluation.
Please consider this letter of discount as the integral part of our price bid.
Thanking you, we remain,
Yours faithfully,
For and on behalf of …….. …….. …….. …….. …….. ……..
Date : -- Printed Name :
Place : Designation :
Details of Octroi
Sl No. Description of Items Amount on which Octroi is applicable Rate of Octroi Octroi
Details of Entry Tax
Sl No. Description of Items Amount on which Entry Tax is applicable Rate of Entry Tax Entry Tax
Details of Other Taxes & Duties
Sl No. Description of Items Amount on which Other Taxes & Duties are applicable Description of Taxes & Duties Rate of Taxes & Duties Amount of Taxes & Duties
Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051) Bid Form 2nd Envelope Sole Bidder 1 st 1 January
0 2 nd 2 February
BID FORM (Second Envelope) 3 rd 3 March
Bid Proposal Ref. No. 5 th 5 May
Date : -- 6 th #VALUE! 6 June
7 th #VALUE! 7 July
To: 8 th #VALUE! 8 August
Contracts Services, 3rd Floor 9 th #VALUE! 9 September
Power Grid Corporation of India Ltd., 10 th 10 October
"Saudamini", Plot No.-2 11 th 11 November
Sector-29, 12 th 12 December
Gurgaon (Haryana) - 122001 13 th
Name of Contract : Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation 15 th
Dear Ladies and/or Gentlemen, 16 th
Schedule 1 Plant and Equipment (Including Mandatory Spare Parts) to be supplied, including Type Test Charges. 21 st
Schedule 2 Local Transportation, In-transit Insurance, loading and unloading 22 th
Schedule 3 Installation Charges. 23 th
Schedule 4 Training charges for training to be imparted. 24 th
Schedule 4b Maintenance Charges during & after Defect Laibility Period.
Schedule 5 Taxes and Duties not included in Schedule 1 25 th
Schedule 6 Grand Summary [Schedule 1to 5] 26 th
Schedule 7 Break-up of Type Test Charges for Type Tests to be conducted 27 th
2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced. 31 st
3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
3.1 100% of applicable Taxes and Duties i.e GST which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.
3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.
4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 1
5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
For and on behalf of …….. …….. …….. …….. …….. ……..
Date : -- Printed Name :
Place : Designation :
In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him.
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.
STATEMENT OF QUOTED / CORRECTED PRICES
All Figures are in Rupees
Sl. No. Price Component Quoted Price Corrected Price
1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00
2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00
3 TOTAL SCHEDULE NO.3: Installation Charges 0.00 0.00
4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable
5 TOTAL BID PRICE: (Excluding Taxes & Duties) 0.00 0.00
6 DISCOUNT #REF! #REF! #REF!
7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!
8 TAXES & DUTIES PAYABLE ADDITIONALLY
A) EXCISE DUTY 0 0.00
B) CENTRAL SALES TAX 0 0.00
C) VAT #REF! 0.00
D) ENTRY TAX / OCTROI #REF! 0.00
F) TOTAL TAXES & DUTIES #REF! 0.00
8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! 0.00
9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00
I) Bidder has indicated the following taxes and duties additionally applicable for their bid:
Excise Duty % as Excise Duty
#REF! VAT #REF! #REF!
#REF! Entry Tax/ Octroi #REF! #REF!
Others as Others
II) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 2% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated :
a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. 0
b) Excise Duty, as applicable on (a) above at the rate : 10.00% Rs. 0
c) Amount on which Sales Tax is applicable 0.00 0
d) CST, as applicable on (a) + ED (b) above at the rate : 2.00% Rs. 0
e) VAT, as applicable on (a) + ED (b) above at the rate : 1.00% 0
g) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. 0
h) Entry Tax, as applicable on (e) above at the rate : Rs. 0.00
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation Statement of Quoted / Corrected Prices Page
Spec. No. Specification No.: NR1/NT/W-AIS/DOM/I00/24/15479 (Rfx-5002004051)
STATEMENT OF QUOTED / CORRECTED PRICES
All Figures are in Rupees
Sl. No. Price Component Quoted Price Corrected Price
1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 0.00 0.00
2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 0.00 0.00
3 TOTAL SCHEDULE NO.3: Installation Charges 0.00 0.00
4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable
5 TOTAL BID PRICE: (Excluding Taxes & Duties) 0.00 0.00
6 DISCOUNT #REF! #REF!
7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!
8 TAXES & DUTIES PAYABLE ADDITIONALLY
A) EXCISE DUTY #REF! 0.00
B) CENTRAL SALES TAX /VAT #REF! #REF!
C) ENTRY TAX / OCTROI #REF! #REF!
D) OTHERS #REF! 0.00
E) TOTAL TAXES & DUTIES #REF! #REF!
8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! #REF!
9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] 0.00 0.00
I) Bidder has indicated the following taxes and duties additionally applicable for their bid:
a) Excise Duty Rs. #REF!
b) CST /VAT Rs. #REF!
c) Entry Tax / Octroi Rs. #REF!
d) Others Rs. #REF!
II) Bidder has offered following discount(s)
III) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 1% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated : Details of dicounts
a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. 0 Gross LS #REF! #REF! #REF! Gross % #REF! #REF! #REF!
b) Excise Duty @ 10.3% of (a) above Rs. 0 #REF! #REF!
c) CST / VAT @ 2% of Ex-Works of Direct Supplies (a) + ED (b) above Rs. #REF! Sch-1 Direct LS #REF! #REF! #REF! Sch-1 Direct % #REF! #REF! #REF!
d) Others Rs. Sch-1 BO LS #REF! #REF! #REF! Sch-1 BO % #REF! #REF! #REF!
e) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. #REF! Sch-2 LS #REF! #REF! #REF! Sch-2 % #REF! #REF! #REF!
f) Entry Tax @ 1% of (e) above Rs. #REF! Sch-3 LS #REF! #REF! #REF! Sch-3 % #REF! #REF! #REF!
Sch-7 LS #REF! #REF! #REF! Sch-7 % #REF! #REF! #REF!
Retrofitting the 220 kV Switchyard equipments and control & protection system with Substation Automation System and SPR based Control & Protection System at Mandola Substation Statement of Quoted / Corrected Prices Page Different Manner #REF!
Text for Discount #REF!
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Price_schedule.xlsx
xlsx • 1.57 MB
00_Cover Pages SS-120.doc
doc • 2.33 MB
00_Main Index_Vol-I.doc
doc • 0.02 MB
01-Section - I IFB SSTE_Vol-I SS-120.docx
docx • 0.04 MB
02 Section - II ITB SSTE S&I DCB-PRANIT_Vol-I.docx
docx • 0.11 MB
03 Section - III BDS SSTE_Vol-I SS-120.docx
docx • 0.07 MB
04-Annexure-A (BDS)_Vol-I SS-120.docx
docx • 0.03 MB
04-Annexure-B(BDS)_Vol-I.docx
docx • 0.02 MB
04-Annexure-C(BDS)_Vol-I.docx
docx • 0.03 MB
05-Section - IV GCC -S&I Rev 3-DCB.pdf
pdf • 1.93 MB
06-Section - V_SCC-AIS_Vol-I SS-120.doc
doc • 0.20 MB
07-Appendix -I to SCC_Vol-I.doc
doc • 0.16 MB
08_Appendix-II to SCC.pdf
pdf • 0.82 MB
09-Section-VI_Sample Forms and Procedures_Vol-I.doc
doc • 0.52 MB
~$ Section - III BDS SSTE_Vol-I SS-120.docx
docx • 0.00 MB
~$-Section - I IFB SSTE_Vol-I SS-120.docx
docx • 0.00 MB
15_0 Civil Works Rev 12_compressed.pdf
pdf • 0.57 MB
16_0 Section Structure Rev 6.pdf
pdf • 0.10 MB
1_0 GTR Rev 15 _compressed.pdf
pdf • 1.09 MB
5 SPR 6 MTR_compressed.pdf
pdf • 1.62 MB
Air conditioning R4.pdf
pdf • 0.04 MB
Breakup of Mandatory spares.xlsx
xlsx • 0.01 MB
DTPC.pdf
pdf • 0.29 MB
Fire Protection Rev 6_compressed.pdf
pdf • 0.62 MB
Mandatory Spares.pdf
pdf • 0.41 MB
Power & Control Cable Rev R6.pdf
pdf • 0.26 MB
sec- CRP Rev 09.pdf
pdf • 0.37 MB
Section project.docx
docx • 0.59 MB
Section Project_compressed.pdf
pdf • 0.29 MB
Section-Sub-station Automation_Rev04_compressed.pdf
pdf • 0.42 MB
Section-Switchgear- ISO rev 12.pdf
pdf • 0.15 MB
Section-Switchgear-CB_Rev11.pdf
pdf • 0.61 MB
Section-Switchgear-INST_rev11_compressed.pdf
pdf • 0.51 MB
Section-Switchgear-SA_Rev12.pdf
pdf • 0.34 MB
Section_Switchyard Erection_Rev_10_compressed_compressed.pdf
pdf • 3.81 MB
SLD OF MANDOLA-Model_FINAL After KPTL package.pdf
pdf • 0.52 MB
SPR details.pdf
pdf • 0.87 MB
First_Envelope_and_Bid_Forms.xlsx
xlsx • 1.32 MB
Price_schedule_1.xlsx
xlsx • 1.57 MB
Vol-III_01_Attachment-3(QR).docx
docx • 0.04 MB
Vol-III_02_Attachment-8-MAF.docx
docx • 0.02 MB
Vol-III_03_Attachment-20_KMP Declaration.doc
doc • 0.04 MB
Vol-III_04_Attachment-21- Affidavit for self-certifictaion PPP-MII.DOCX
docx • 0.02 MB
Vol-III_05_Attachment 22- Certificate by Auditor PPP-MII.docx
docx • 0.02 MB
Vol-III_06_Attachment 23- Compliance to the process related to the e-RA.docx
docx • 0.02 MB
Vol-III_07-Attachment -24_Declaration regarding events encountered.docx
docx • 0.03 MB
Vol-III_08-Attachment-25- Undertaking by the bidder regarding Compliance of DMI&SP policy.docx
docx • 0.02 MB
Vol-III_09_Attachment-26-Certification by the Bidder per DoE Order.docx
docx • 0.02 MB
Vol-III_10_Attachment-27_Bid Securing Declaration.docx
docx • 0.02 MB
Vol-III_11_Attachment-28.docx
docx • 0.02 MB
Vol-III_12_Legends for Units.pdf
pdf • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .