WBPHED/DIC/BMSD(D)/NIeT-2 of 2025-26_5

Amount

Fault finding and checking of all the switch gear items by dismantling all the switch gear items along with all of the electrical power circuit (from busbar to all the contractors) and control circuit (for diffrent switch gear items) routing making necessary cleaning of the all the different feeder for submersible and centrifugal for operation, by dismantling the existing fixd board (on which the switch gears were fixed) and checking faults of the above said items by prident electrician by proper elecrtical & electronics instruments as needed to complete the work as per direction of EIC.

Supply delivery of the following items

MPCB , TP 20-25 Amp (Make-ABB/Approved)

MPCB , TP 10-16 Amp (Make-ABB/Approved)

Indicating Lamp , LED Type, 230V AC, (Red, Green, Amber) (Make-ABB)

Power contactor , 3P 240VAC coil (Star) , 32 Amps (Make-ABB/Siemens)

Contact Block NO-NC (Make-ABB)

Power contactor , 3P 240VAC coil (Star) , 25 Amps (Make-ABB)

Contact Block NO-NC (Make-ABB)

Normal duty Capacitor , 440 V, AC , 3 KVR (Make-Epcos)

Normal duty Capacitor , 440 V, AC , 2 KVR (Make-Epcos)

UV/OV/SPP Monitoring Relay, 415 V AC (Make-GIC )

Star Delta Timer , 230V AC (Make-GIC)

Analog AMMETER, 96 SQ. MM. (DIRECT),0-30A (Make-Schneider)

Tharmal OLR with mounting Kit ( Make-ABB/Approved)

Normal Push button , 230 V AC ((Red, Green) (Make-ABB)

Power Treminal ,3 way , 250 Amp (Make- Reputrd)

MCB TP , 16 Amp ( for 2/3 kvr capacitor ) (Make-ABB/Approved)

Other items

1.5 SQ MM WIRE , FRLS (Make- Polycab /Havells)

2.5 SQ MM WIRE , FRLS (Make- Polycab /Havells)

4 SQ MM WIRE FRLS (Make- Polycab /Havells)

6 SQ MM WIRE FRLS (Make- Polycab /Havells)

10 SQ MM WIRE FRLS (Make- Polycab /Havells)

16 SQ MM WIRE FRLS (Make- Polycab /Havells)

Related Hardware for rectification (cable tie, socket, fork, R/YB Tapes, metal sheets, nuts, bolts, board for fixing items etc ) of differet centrifugal feedrs of with complete new wiring to both the control and power circuit to complete the job as per direction of EIC

Installation of the above switch gear items and making complete connection of all the control and power circuit of all thesubmersible and chlorine feeders by cutting and welding for fixing the different switch gear items by proper prudent electrician and workman and testing commissoining up to a certain period of operation upto the satisfaction of EIC, as per direction of EIC .

Dismantling the existing Starter and from the submersible pump , dewatering and other pumps and necessary interconnection of the cable to the existing rectified feeder with checking testing and finding fault of the XLPE armoured cable in the riverbed with checking magger and making joint to rectify the submersible pump to keep in operation as per direction of EIC

Add: 18% GST

Add: 1% Cess

UNITED TRADERS (BID ID -6574204)

M/S NABIN GOPAL SENGUPTA (BID ID -6574274)