Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance NOT AVAILABLE | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
19 Jun 2025, 12:00 pmClosed
Principal
Sri Guru Gobind Singh College of Commerce, University of Delhi,Pitam pura, Delhi-110034
E-Tender for Computer Lab Audio Video Electrical and Interior Works at SGGSCC
2025_DU_862944_1
SGGSCC/E-TENDER/2025-26/01
Open Tender
Electrical Works
Works
Sri Guru Gobind Singh College of Commerce
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Principal,Sri Guru Gobind Singh College of Commerc
₹40,000
7 Jul 2025
5 Jun 2025
20 Jun 2025
5 Jun 2025
19 Jun 2025
5 Jun 2025
Amount
False Ceiling (DSR 2023 Item 12.45.3): P&F false ceiling at all height including framework made of special sections power pressed from M.S. sheets galvanized (120 gms/sqm) consisting of angle cleats hangers intermediate channels ceiling section perimeter channels etc. including fixing 12.5 mm thick tapered edge gypsum moisture resistant board with dry wall screws including jointing and finishing with jointing compound tape and primer including making openings for services etc. complete.
Grid False Ceiling (DSR 2023 Item 12.52.4): P&F 595x595mm tiled false ceiling suspended on interlocking metal T-Grid (hot dipped GI sections) including main 'T' cross 'T' secondary cross 'T' wall angle cleats hangers adjustable rods level clips etc. including laying 12.5 mm thick fully Perforated Gypsum Board Tile (IS:2095 Part 1) backed with non-woven tissue (NRC 0.79) with 50mm resin bonded glass wool backing including making openings for services etc. complete. Tile Make: Armstrong/India Gypsum/Gyproc.
Gypsum Board Partition (DSR 2023 Item 9.105.1): P&F partition upto ceiling height consisting of G.I. frame (floor/ceiling channels 50mm wide studs 48mm wide) and fixing 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board (IS:2095 Part 3 BIS marked) to both sides including M.S. fixing channel at horizontal joints jointing and finishing with jointing compound tape angle beads joint finisher and two coats of primer. Overall thickness 75mm.
Computer Table: Work surface 18 mm thick plywood (duro/green/virgo/sundek) with 1mm thick laminate (Merino/sundek/virgo) top 3 mm thick polished teakwood beading. Understructure 25mm thick square pipe (1.25mm thick wall). MIG/CO2/Electric welding. Steel from SAIL/TataSteel/Jindals or equivalent (IS: 513/IS: 2062). Powder coated components tested for Scratch resistance (4 kgs) & Impact resistance (150kgs/cm). High quality heavy duty PVC/Rubber/EPDM buffers. Make Godrej or equivalent (Feather lite Wipro BP Ergo).
Computer Table - Size: 750 (W) x 600 (D) x 750 (H) mm
Computer Table - Size: 1200 (W) X 600 (D) X 750 (H) mm
Chair: 33 Inch high chair padded seat and back cushion upholstered in Polycotton fabric (min Rs. 120/-meter). Cushioned black armrests over Stainless-Steel tubular frame (min 1.6 mm thickness). High quality heavy duty PVC/Rubber/EPDM buffers.
Fire Extinguisher: Providing and fixing ABC powder type fire extinguisher 6 Kg capacity suitable for inverted operation 1.6 mm M.S. sheet body internally anti-corrosive treated hydraulically tested (25 Kg/Sqcm) externally red enamel painted fixed with brackets complete with internal charge and spanner (Conforming to IS:13849).
Disposal of building rubbish/malba/similar unserviceable dismantled or waste material by Mechanical transport including loading transporting unloading to approved municipal dumping ground for lead upto 10 km for all lifts complete as per directions of Engineer-in-charge. (Similar to DSR 15.60 but specific lead)
*Quoted prices inclusive of all Speaker cables connectors Microphone cables HDMI cables and any other items required for functioning of the system*
SITC OF DLP Technology Laser projector: Min 4000 ANSI Lumens Contrast 3000000:1 WUXGA (1920x1200). Make: Panasonic / Vivitek (By Delta) / NEC
SITC of 120 diagonal HD 3D Motorized Projector screen: 4:3 Ratio with remote control. Make: Starwayline / Red chief / Liberty / Elite
SITC of Two way 5.25 Polypropylene LF driver indoor/outdoor surface mount speaker System: 40W RMS/160W peak In-built LMT for 100V/8 ohm. Make: VAL Audio iComm SMS52T / JBL / Celto acoustique / Martin Audio
Commercial Mixer amplifier: Max power 120W 4-16 ohm & 70V/100V LMT output 2 mic inputs 3 aux inputs media player (Bluetooth/USB). Make: Val Audio ML Series/Crown ΜΑ Series/ Martin Audio / Celto acoustique
SITC of main SYSTEM RACK 9U Wall mount: M.S. Rack with Power indicator sockets isolator prewired cooling fan. Make: Backom/MTS/A-LINIKS
Supply laying & Fixing of Speaker Lines: 2-Core 1.5 sq mm High definition Speaker Cable PVC insulated/jacketed in existing conduits. Make: Belden / Krystal / Kramer / Bestnet
Supply & laying of HDMI cable 20 Mtr: Version 2.0 4k. Make: kramer / beldon / krystal / Bestnet
Wiring for light points - Primary point: 1.5 sq.mm PVC insulated copper FRLS wires in concealed/surface 25 mm dia 16 gauge MS Conduit including 6A modular switch GI box earthing (1.5 sq.mm wire). (including circuit wiring from DB to switch Board)
Wiring for light points - Secondary point (looped)
Wiring for ceiling fan point: 1.5 sq.mm PVC insulated copper FRLS wires in concealed/surface 25 mm dia 16 gauge MS conduits including fan hook box 6A switch 300W electronic step type fan regulator GI box earthing (1.5 sq. mm wire). (including circuit wiring from DB to switch Board)
Wiring for 16A switched socket outlet - Primary point: 3 x 4 sq.mm PVC insulated copper FRLS wire in concealed/surface 25 mm dia 16 gauge MS conduit/raceway including 16A 3 pin modular switched socket GI box grid plates earthing (4 Sq mm wire).
Wiring for 16A switched socket outlet - Secondary point (looped)
Wiring for 6A switched socket outlet - Primary point: 3x2.5 sq.mm PVC insulated copper FRLS wire in concealed/surface 25 mm dia 16 gauge MS conduit/raceway including 6/16A 3 pin modular switched socket GI box grid plates earthing (2.5 Sq mm wire).
Wiring for 6A switched socket outlet - Secondary point (looped)
Wiring for 16A polycarbonate industrial 3 pin (IP 65/66) socket outlet: 3x4 sq.mm PVC insulated copper FRLS wires in concealed/surface 25 mm dia 16 gauge MS Conduit including 16A socket DP MCB (IP 65/66) in polycarbonate enclosure earthing (4 sq.mm wire).
Providing and fixing 20 mm dia 2mm thick PVC rigid conduit concealed or exposed including accessories (bends junction boxes cover plates).
Providing and fixing 25 mm dia 2mm thick PVC rigid conduit concealed or exposed including accessories (bends junction boxes cover plates).
Supplying 1100V grade XLPE insulated PVC sheathed copper conductor armoured cable - 4 core 6 sq. mm
Supplying 1100V grade XLPE insulated PVC sheathed copper conductor armoured cable - 3 core 6 sq. mm
CABLE TRAY: Supplying and installing 200 mm width X 50 mm depth X 1.6 mm thickness perforated powder coated M.S. cable trays (max 17.5% perforation) including connectors suspenders bolts & nuts painting.
DISTRIBUTION BOARDS: SITC 32way TPN cubicle type 1.6 mm thick CRCA sheet steel enclosed recessed/surface mounted final DB powder coated double door four tier with 24 No 10/16/20/32A SP MCB outgoing 1 No. 63A 4 Pole MCB incomer neutral link earth bar.
Supplying fixing testing 8 SWG bare GI wire including accessories.
Pipe Earthing (IS:3043): 3.0m long 40mm dia 'B' class GI Pipe (perforated) accessories (nut bolts reducer nipple funnel) CC chamber hinged locking CI Cover & Frame (300x300mm) alternate layers salt & coke/charcoal testing.
Supply laying connecting testing Single core 120 sq.mm Green colour cable (UPS neutral earthing).
SITC Ceiling fan 1200 mm dia approved make complete with accessories.
SITC Wall mounting Fluorescent tube light fitting 1x 28W T5 Box type powder coated CRCA housing reflector cover electronic ballast bipin holders connector block pre-wired connecting cable. (Bajaj cat no. 160483 or equivalent Philips/CG).
SITC Recessed mounted 15W LED down lighter die cast aluminium housing. (Equivalent to Havells INTEGRANEODLR12WLED8405).
Supply & Fixing 36W 600x600mm recess/surface LED Panel Steel sheet body powder coated. (Philips/Osram/Wipro/Havells VENUSNEOHE2X2PLR18-42WLED830MOD).
SITC flush mounted Single outlet faceplate with RJ-45 jack wired (T568A/B) British style faceplate (high impact flame-retardant) Dust cover/blank Termination caps plastic cover including 1.6mm thick GI Boxes.
SITC 4 pair Category 6 LAN cable 24 AWG solid copper conductors with Flexible Jacket & ripcord.
SITC 10 pair Tag Blocks and boxes with lockable door.
Supply laying installation testing 2 pair 0.61 mm PVC insulated tinned copper conductor cable/wires in existing tray/conduits.
SITC 12U Fully loaded Rack. (Make D-Link)
SITC 24 port Giga byte switch for LAN wiring.
SITC 10 KVA ONLINE UPS: 30 min battery backup 1 phase input & 1 phase output. Inclusive of approved rating single core copper conductor cable connecting UPS. Equipment in individual cabinets. (EATON PEGASUS or SCHNEIDER ELECTRIC MAKE ONLY).
Fusion of Design (BID ID -3234946)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .