REPAIR/ RENEWAL TO INTERNAL WIRING INCLUDING LIGHT FITTINGS AND FIXTURE MCBs DBs AND SUBMAIN WIRING AT JCOs/OR ACCN AT OVL NVL GFA OUTRAM LINE USMAN ROAD RSV BHAGAT LINE SYYV NGFA THELA GRND OLD GFA INCL SF ACCN UNDER GE(WEST) LUCKNOW

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, bell push, light fitting etc for taking credit and making good disturbed surfaces of walls, floors,etc complete all as specified and as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC(FRLS)insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC (FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories omplete all as specified and as directed.

All as per Item No 2 above but for one 5 pin 5 Amp socket outlet point on an independent board complete all as specified and as directed.

All as per Item No 2 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch complete all as specified and as directed.

All as per Item No 2 above but for One bell/ buzzer point controlled by one bell push complete all as specified and as directed.

All as per Item No 2 above but for One light point controlled by two two way switch complete all as specified and as directed.

All as per Item No 2 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm complete all as specified and as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn into and including suitable size surface conduit/casing caping, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and as directed.

All as per Item No 8 above but for one 5 pin 5 Amp socket outlet point on an independent board complete all as specified and as directed.

All as per Item No 8 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch complete all as specified and as directed.

All as per Item No 8 above but for One bell/ buzzer point controlled by one bell push complete all as specified and as directed.

All as per Item No 8 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm complete all as specified and as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn into existing conduit, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and as directed.

All as per Item No 13 above but for one 5 pin 5 Amp socket outlet point on an independent board complete all as specified and as directed.

All as per Item No 13 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch complete all as specified and as directed.

All as per Item No 13 above but for One bell/ buzzer point controlled by one bell push complete all as specified and as directed.

All as per Item No 13 above but for One light point controlled by two 2 way switch complete all as specified and as directed.

All as per Item No 13 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm complete all as specified and as directed.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and as directed.

S & F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and as directed.

S&F switch piano flush button single pole two way 5 Amp 240 volt complete all as specified and as directed.

S&F socket outlet flush type multipurpose 2 in1, 3 pin 5 and16 Amp, 230 volts complete all as specified and as directed.

S&F socket outlet flush type multipurpose 2 in 1, 5 pin 6Amp, 230 volts complete all as specified and as directed.

S&F fan regulator electronic,step up socket type,230 volt,125 W and conection complete all as specified and as directed.

S&F ceiling rose surface bakelite three terminal complete all as specified and as directed.

S&F bell push single pole one way 5 Amp, 240 volt fuesh type complete all as specified and as directed.

S&F call bell AC single pole 240 volt ding dongType. complete all as specified and as directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed.

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 and IK 08 protection cover suitable for bulk head fitting integrated type 10/7W LED, 6500K , 100 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V , minimum 100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements complete all as specified and as directed.. Makes shall be provided group- I cat as per latest approved make given by HQ CECC

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed. Makes shall be provided group- I cat as per latest approved make given by HQ CECC

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace / Bajaj / Havells decorative model Floretine WL 1LS B22 SS ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)

S& F in repair Decorative wall bed light fixture made up of Metal base, synthetic white in colour and round metal base with bend pipe integrated LED type, 230 V, 3000K, complete incl all required electrical connecting arrangements complete all as specified and as directed. Makes shall be provided group- I cat as per latest approved make given by HQ CECC

S&F in repairs of surface type round LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours aliminium PDC complete all as specified and as directed.. Makes shall be provided group A cat as per latest approved make given by HQ CECC

S&F in repairs of surface type square LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours aliminium PDC all as per specified and directed. Makes shall be provided group- I cat as per latest approved make given by HQ CECC

S&F in repairs of reccessed type square LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours aliminium PDC complete all as specified and as directed. Makes shall be provided group- I cat as per latest approved make given by HQ CECC

Supply and fixing LED lamp 7/9 watt, complete all as specified and as directed. Makes shall be provided group- I cat as per latest approved make given by HQ CECC

Supply and fixing in repair FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as specified and as directed. Make: HAVELLS with cat Part No. REGALBATTEN8UPTO1X22WDSBSWH / Bajaj with cat part no. BLRB-DB 118/Philips cat part no. TMC100 1XTLED13-20WH

Supply and fixing in repair Material glass led tube ,voltage range 220-240v-50hz ,cct 6500k,lumen ,wattage 20/22W surge 2.5kv ,CRI 70 POWER FACTOR >_0.9 ,BURING HOURS 25K HOURS 110 L/W ,6500 K with high efficency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as specified and as directed. Makes shall be provided group- I cat as per latest approved make given by HQ CECC

S&F in repair LED Building security light 20/25 Watt with high power LED source (>100 lumen/watt) PDC housing, IP66 and IK 07 with 4 KV inbuilt surge protection ,minimum 50000 burning hours hv cutoff@325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and as directed. Makes shall be provided group- I cat as per latest approved make given by HQ CECC

S & F in replacement of GI pipe light grade, 32 mm bore, 1.20 mtr long bend in required shape, MS clamp 40x3mm thick duly painted with two coats of synthetic enemal paint fixed on wall including bolts and nuts complete all as specified and directed.

S & F in repairs integrated LED type Post top lantern with high power 25/30 W LED and IP 65 and IK 05 with 4 KV Surge protection as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection complete all as specified and as directed. Makes shall be provided group- I cat as per latest approved make given by HQ CECC

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and as directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and as directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn into existing conduit complete all as specified and as directed. NOTE:- One unit length shall measured as two run of main wire and one run of earth wire.

Supply and fixing in replacement for 1.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and as directed.

Supply and fixing in replacement for 2.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

Supply and fixing in replacement for 4 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and as directed.

S & F three core PVC insulated FRLSH sheathed cable with 1.5 sqmm stranded copper conductor complete all as specified and as directed.

S&F in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 10 sqmm aluminiuam conductor complete all as specified and as directed.

S&F sheet metal enclosure for MCB DB double door type, TPN 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

S&F MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

S&F in replacement of sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with including one single pole MCB 20 Amps complete all as specified and as directed.

S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB 63-125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed by Engr-in-charge.

S&F MCCB 63-125 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and as directed.

Supply and fixing PVC casing and caping, 15mm wide complete all as specified and as directed

Supply and fixing PVC casing and caping, 20mm wide complete all as specified and as directed

S & F in replacement of switch piano flush button single pole one way 5/6 Amp 240 volt complete all as specified and as directed.

S & F in replacement of switch piano flush button single pole one way 15/16 Amp 240 volt complete all as specified and as directed.

S&F in replacement of socket outlet flush type multipurpose 2 in 1, 3 pin 5/6 and 15/16 Amp, 230 volts complete all as specified and as directed.

S&F in replacement of unservicable socket outlet flush type multipurpose 2 in 1, 6pin 5 .Amp, 230 volts complete all as specified and as directed.

S&F in replacement of switch socket outlet combination flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and as directed.

S&F in replacement bell push single pole one way 5 Amp, 240 volt fuesh type complete all as specified and as directed.

S&F in replacement call bell AC single pole 240 volt ding dong Type complete all as specified and as directed.

S&F in replacement high range up to 40 mtr , cordless call bell with wireless remote including batteries complete all as specified and as directed.

S&F in replacement angle/batten type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement PVC gang box fitted with and including piano type switch 5 A and socket 5 A, 230 Volts complete with pvc gitties and screws complete all as specified and as directed.

S&F in replacement PVC gang box fitted with and including piano type switch 15 A and socket 15 A, 230 Volts complete with PVC gitties and screws complete all as specified and as directed.

S & F rectangular laminated hylum sheet top cover for switch sockets of size' (125mmx125mmx3mm) complete all as specified and as directed.

Same as item 74 here in before but (200mmx125mmx3mm) complete all as specified and as directed.

Same as item 74 here in before but (225mmx275mmx3mm) complete all as specified and as directed.

M & L for spray painting to indoor electric panel with one coat of synthetic enamel paint for indoor type panel board infront side and both side with one coat inside with any nut bolts and hingies reqd to replacement and writing the Bldg No in front side of meter for various location and various sizes complete all as specified and as directed.

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and as directed .

suniltraders

HS ASSOCIATES

Shree Kanth Technologies

Mangalam Trades

VIDYA TRADERS

M/s Pratap Associates

Unnati Engineers