Construction of wash room facility and aluminium partition to Pump House at 100 bedded maternity Hospital at SKIMS.

Amount

Earth work in excavation by manual means in trenches for foundation, drains pipes, cables etc (Not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan including dressing of sides and bottom lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soil including dewatering if required.

Providing and laying of hand packed stone solling / boulders including all carriages upto site of work.

Providing and laying cement concrete of 1:4:8(1 Cement, 4 Coarse sand 8 graded stone aggregate 40 mm nominal size.) including curing but excluding the cost of centering and shuttering. All work upto plinth work including all carriage.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).including all carriage.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for RCC work including straightening, cutting, binding and placing in position complete (TMT bars).

Centring and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Edges of slabs and breaks in floors and walls. Under 20 cm wide

Brick work with FPS of bricks of class designation 75 in foundation and plinth in 1:4 cement mortar including curing, and all carriage.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

12 mm cement plaster of mix 1:4 mix(1 cement 4 coarse sand)

Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.

Forming grooves of uniform size in the top layer of washed stone pebble dash plaster as per approved pattern using wooden battens nailed to under layer including removal of wooden battens repair to edges. 15mm wide and 15mm deep.

Providing and fixing of Ist quality ceramic glazed wall tiles confirming to IS 15622 of approved quality and manufacture in all colours and shades over 12mm thick cement plaster in 1:3 mix.

Providing and laying of vitrified glazed floor tiles of approved make of size 600x600mm laid over 20mm thick cement mortar in 1:4 mix including grouting the joints with matching pigment.

Providing and fixing of wood work in frames of doors, windows, celestory windows and other frames wrought framed and fixed in position using first class deodar wood including cost of hold fasts.

Providing and fixing of35mm thick flush door shutters ISI marked Non decorative type core of block board with frame of Ist class hard wood and well matched 3 ply veeneering with vertival grains including cost of butt hinges.

Providing and fixing of 30mm thick glazed shutters for windows, doors, celestory windows fixed with butt hings cost of butt hinges will be paid seperately using 3.5mm thick glass panesi First class kail wood.

Providing and fixing of 30mm thick wire guage shutters for windows, doors, celestory windows fixed with butt hings cost of butt hinges will be paid seperately using 0.63mm dia of wire in first kail wood.

Providing and applying white cement based putty of 2mm thick of approved brand and manufacture over plastered surface to make the surface even and smooth.

Wall painting with plastic emulsion paint of approved make on wall surface two or more coats.

Applying one coat of cement primer of approve make.

Painting with synthetic enamel paint of approved make. (two or more coats)

Providing and fixing of G.I pipe including G.I fittings and clamps including cutting and making good the walls.

15mm nominal bore (concealled)

20mm nominal bore (concealled)

25mm noiminal bore

Providing and fixing of C.P bib cock of approved make (Jaquar / Parko) long body.

Providing and fixing of CP angle value of approved make (Jaquar / Parko).

Providing and fixing of CP wall mixer of approved make (jaquar / Parko).

Providing and fixing of PVC connections of approved make 24" length.

Providing and fixing of flexible waste pipe of approved make 32mm.

Providing and fixing of Mirror of superior quality of approved make(453mm * 357 mm).

Providing and fixing of soap case of approved make.

Providing and fixing of Cp grating of approved make.

Providing and fixing of ball value of approved make:

Providing and fixing of following fittings of approved make:

GI union 15mm

union 20mm

Union 25 mm

Reducer 25x20

Reducer 20x15

Elbow 15mm

Elbow 20mm

Elbow 25mm

Tee 15mm

Tee 20mm

Tee 25mm

P/f of water closet squatting pan ( Indian type WC pan) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures complete including cutting and making good the wall and floors whereever required. white viterous china orissa Pattern WC pan of size 580x440mm with integral type foot rests.

Providing and fixing of CI pipes of approved make including jointing with lead caulked and all carriages upto site of work.

Providing and fixing of CI fittings of approved make including jointing with lead caulked and all carriages upto site of work(100mm dia)

Plain bend

floor trap

collar

Door tee

Plain tee

Providing and fixing wash basin with Ci brackets 32mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required white viterous china wash basin size 550X400mm

Providing and fixing of china pedastal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing of CP nipples of approved quality and manufacture

Providing and fixing of glass shelves of approved quality and manufacture

Providing and fixing of hardware fittings of approved make

Tower bolt 100mm

Tower Bolt 150mm

Handle 100 mm

Handle 150mm

Link Lock 8"

Providing and fixing of powder coated aluminium section for door, windows, partitions etc with extruded built up section standard tabular section / approriate Z section and other section of approved including aluminium sanp beading, rubber neoprene gaskets, cleats etc complete in all respects

For fixed portion

For shutters

Providing and fixing glazing in aluminium door, window, and partitions in aluminium work using 5.0mm thick glass panes including rubber neoprene gaskets.

Providing and fixing of 3.0mm thick ACP sheet panelling in aluminium work including cost of rubber neoprene gaskets.

constructing brick masonary manhole of specified size 50*45*60 cm bricks of class designation 75 in cement mortar 1:4 including Mud mat in 1:4:8 mix and inside plastering 12mm thick in 1:3 mix with floating coat of neat cement slurring and top cover of CI with frame complete in all respect.

Structural steel work welded in built up section , trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of steel primer of approved make.

Providing corrugated GS sheet roofing including vertical/curved surfaces fixed with polymer coated J or L hooks, nuts bolts with G.I Limpet washers including priming coat to overlapping with approved steel primer 0.63mm thick sheets.

Providing ridges or hips of width 60cm overall with plain GS sheets fixed with polymer coated J or L hooks nuts, bolts and G.I Limpet and bitumen washers.

NADEEM AHMAD BHAT