PROVISION OF ACCESS STAIRCASE TO SERVANT QUARTERS AT J BLOCKS AT NOFRA COLABA MUMBAI AND PROVISION OF ACCESS STAIRCASE TO SERVANT QUARTERS AT K BLOCKS AT NOFRA COLABA MUMBAI AND PROVISION OF HARD STANDING BEHIND CHITRA AND KANYA BLDG AT NOFRA UNDER

Amount

PROVISION OF ACCESS STAIRCASE TO SERVANT QUARTERS AT “J” BLOCKS AT NOFRA, COLABA, MUMBAI

Demolition of RCC in roofs, floors (other than ground floors), beams, staircases, landings, chajjas and similar suspended work at any position/height ,complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and any position/height ,complete all as specified and directed.

S &F Rolled mild steel in stairs (Fe 290 Gde E 165) (Framed) including stringers, treades, landings, balusters, hand rails etc, with cutting to dead length where require, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts) fitting of angle cleats, fish plates, gusset plates etc ,complete all as specified and directed.

S&F Chequered mild steel plate as in staircase landing and tread incl necessary welding etc ,complete all as specified and directed by Engr-in-charge.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces of any description and at any position ,complete all as specified and directed. Make of synthetic enamel paint : Berger Paints (Luxol), Asian Paints (Apcolite) or its equivalent in Nerolac.

Excavation in trenches nexc 1.5m wide and n exc 1.5m deep in soft / disintegrated rock for foundation etc ,complete all as specified and directed.

M&L for Reinforced cement concrete (1:1.5:3) as in foundations, footings ,etc incl necessary formwork as required ,complete all as specified and directed.

Removal of excavated material rocks exc250 m & n.exc 500m distance and depositing where directed by Engr-in-charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers nexc 25 xm in soft/ disintegrated rock ,complete all as specified and directed.

M&L for rendering in cement mortar 1:4, 20mm thick on fair face of brick work/ concrete work and finised even and smooth without using extra cement incl taking down of old plaster at any position ,complete all as specified and directed.

M & L preparation surfaces of new plastered surfaces wall/chajja and applying one coat of acrylic exterior primer and apply two coats acrylic emulsion exterior grade (100%) etc all as spacified & as suggested by the manufacturers at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. Make : (a) acrylic exterior primer : Asian Paint Ultima, Berger Paint (Weather coat all guard emulsion) Nerolac (Excel anti peel emulsion) (b) primer : Asian paints, Nerolac, Berger .

M & L in repairs Galvalume sheets in chajjas/walls/roof, fitting & fixing anti corrosive pre painted/colour coated galvalume base sheet of thickness 0.50mm TCT (total coated thickness) having high tensile strength not less than 550 Mpa yield strength CR steel base metal with hot dip alloy coating of Al-Zn-Si as per ASTM-A792 M - 02 / AS-1397 ALU-ZINC alloy sheet shall be on alloy of 55% Aluminium + 43.5% Zinc + 1.5% Silicon. The total coating of alloy shall not be less than 150 grms per Sqm (AZ150) as per ASTM-792 or AS -1397 with top coat of 20 micron (DFT) epoxy primer. The overall width shall be 1072 mm and effective width of sheet shall be 1015mm. The profile shall be 203 x 28.5 mm. The sheet shall be provided with protective polythene cover for avoiding damage during transit. Each sheet shall have manufacturers name / batch No etc duly marked on rear side of the sheet. The sheet shall be fixed to purlin with self drilling and self tapping screws of 12 guage dia, Zn/ Sn alloy coated by mechanical coating @ 5 per sqm ie. sheet shall be stiched with the purlins at the every crest conforming to IS AS-3566 of ATW- HILTY/ Buildex corroshield make with moulded EPDM washers all as specified and directed. The length of screw shall be 55mm having 14 threads per inch. It shall have threads atleast 1/8th inch at top and 2 threads extra at bottom to achieve maximum pull out strength. For stiching operation in between the purlin support (sheet to sheet, flashings, ridges) 10 guage / 20mm length/ 12 threads per inch self drilling and taping screws shall be fixed at every crest of the sheet. NOTE :- Rate quoted is deemed to be inclusive of leak proof jointing and testing of roof sheets.

PROVISION OF ACCESS STAIRCASE TO SERVANT QUARTERS AT “K” BLOCKS AT NOFRA, COLABA, MUMBAI

Demolition of RCC in roofs, floors (other than ground floors), beams, staircases, landings, chajjas and similar suspended work at any position/height ,complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and any position/height ,complete all as specified and directed.

S &F Rolled mild steel in stairs (Fe 290 Gde E 165) (Framed) including stringers, treads, landings, balusters, hand rails etc, with cutting to dead length where require, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (incl rivets or bolts and nuts) fitting of angle cleats, fish plates, gusset plates etc., ,complete all as specified and directed.

S&F of chequered mild steel plate as in staircase landing and tread incl necessary welding etc ,complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces of any description and at any position ,complete all as specified and directed. Make of synthetic enamel paint : Berger Paints (Luxol), Asian Paints (Apcolite) or its equivalent in Nerolac.

Excavation in trenches nexc 1.5m wide and n exc 1.5m deep in soft / disintegrated rock ,complete all as specified and directed.

M&L RCC - 1:1.5:3 as in foundations, Footings incl necessary formwork as required ,complete all as specified and directed.

Removal of excavated material rocks exc250 m & n.exc 500m distance and depositing where directed ,complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers nexc 25 xm in soft / disintegrated rock ,complete all as specified and directed.

M&L for rendering in cement mortar (1:4), 20mm thick on fair face of brick work/ concrete work and finised even and smooth without using extra cement including taking down of old plaster at any position ,complete all as specified and directed.

M & L preparation surfaces of new plastered surfaces wall/chajja and applying one coat of acrylic exterior primer and apply two coats acrylic emulsion exterior grade (100%) etc all as spacified & as suggested by the manufacturers at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. Make : (a) acrylic exterior primer : Asian Paint Ultima, Berger Paint (Weather coat all guard emulsion) Nerolac (Excel anti peel emulsion) (b) primer : Asian paints, Nerolac, Berger

M & L in repairs Galvalume sheets in chajjas/walls/roof, fitting & fixing anti corrosive pre painted/colour coated galvalume base sheet of thickness 0.50mm TCT (total coated thickness) having high tensile strength not less than 550 Mpa yield strength CR steel base metal with hot dip alloy coating of Al-Zn-Si as per ASTM-A792 M - 02/ AS-1397 ALU-ZINC alloy sheet shall be on alloy of 55% Aluminium + 43.5% Zinc + 1.5% Silicon. The total coating of alloy shall not be less than 150 grms per Sqm (AZ150) as per ASTM-792 or AS -1397 with top coat of 20 micron (DFT) epoxy primer. The overall width shall be 1072 mm and effective width of sheet shall be 1015mm. The profile shall be 203 x 28.5 mm. The sheet shall be provided with protective polythene cover for avoiding damage during transit. Each sheet shall have manufacturers name / batch No etcduly marked on rear side of the sheet. The sheet shall be fixed to purlin with self drilling and self tapping screws of 12 guage dia, Zn/ Sn alloy coated by mechanical coating @ 5 per sqm ie. sheet shall be stiched with the purlins at the every crest conforming to IS AS-3566 of ATW- HILTY/ Buildex corroshield make with moulded EPDM washers all as specified and directed. The length of screw shall be 55mm having 14 threads per inch. It shall have threads atleast 1/8th inch at top and 2 threads extra at bottom to achieve maximum pull out strength. For stiching operation in between the purlin support (sheet to sheet, flashings, ridges) 10 guage / 20mm length/ 12 threads per inch self drilling and taping screws shall be fixed at every crest of the sheet. NOTE :- Rate quoted is deemed to be inclusive of leak proof jointing and testing of roof sheets.

PROVISION OF HARD STANDING BEHIND CHITRA AND KANYA BLDG AT NOFRA UNDER GE (NW) NOFRA, COLABA, MUMBAI

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out hard/dense soil ,complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out ,complete all as specified and directed.

M & L for hardcore of gauge nexc 63mm broken stone , deposited, spread and levelled in layers not exc 15 cm thick, watered and rolled/rammed to a true surface for levelling the surfaces ,complete all as specified and directed.

M & L for cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate ,in foundations, filling and mass concrete ,complete all as specified and directed.

M & L Brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6), complete all as specified and as directed.

M & L for 100 mm thick PCC 1:4:8 type D-2 in sub bases of flooring ,complete all as specified and directed.

M & L for PCC ,1:2:4 (40mm graded aggregate) ,type B- 2 foundation, including rafts, footings, foundation beams, plinth beams, bases for column, etc basement slabs, under reamed piles and mass concrete as in flooring with stamp finishing as approved by GE ,complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick ,complete all as specified and directed.

Removing excavated soil not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point ,complete all as specified and directed.

S & F Mild steel framed work (Fe-410-O) or (Fe-310-O) such as grill, gratings, sheet including welding to purpose made hinges etc with the ends of bars shoulders or riveted or forged into spikes framed guard bars railing and similar works fixing with bolt etc complete all as specified and directed

P/O TWO NO. SENTARY POST FOR BUILDING NO. 22 NAPIER ROAD (DGNP HOUSE) AT NANABHAI MOOS MARG, NEAR RC CHURCH, COLABA, MUMBAI

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil ,complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard / Dense soil etc complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point ,complete all as specified and directed.

M & L for cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40mm graded aggregate) ,complete all as specified and directed.

M & L for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete reinforced cement concrete etc complete all as specified and directed .

M & L for RCC M-25 (20mm graded aggregates) Columns, pillars, piers,posts and struts) etc ,complete all as specified and directed.

M & L for RCC M-25 (20mm graded aggregate) Beams, cantilevers,bressummers, lintels over 1.5m span ,complete all as specified and directed.

M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc ,complete all as specified and directed.

M & L for damp proof course to horizontal or vertical surfaces including necessary formwork in Cement Concrete 1:2:4 type B-O , 40mm thick ,complete all as specified and directed.

S & F for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter ,complete all as specified and directed.

S & F for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete flat etc ,complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces of concrete flat etc ,complete all as specified and directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete sqaure rectangular or polygonal etc ,complete all as specified and directed.

S&F for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc.10cm wide fair finished surfaces of concrete etc ,complete all as specified and directed.

S&F of Reinforced Cement Concrete Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Cement Concrete M-25 (20mm graded aggregates) etc ,complete all as specified and directed.

M & L for Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc ,complete all as specified and directed.

S & F for Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc ,complete all as specified and directed.

Spreading and levelling in layers n exc. 25 cm thick & well ramming including watering as required etc ,complete all as specified and directed.

M & L for broken stone or boulders, Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ,complete all as specified and directed.

M & L for rendering Cement Plaster 15mm thick (CM 1:6) on surfaces other than fair faces of brick work or on one side of lathing finished even and smooth (without using extra cement) concrete surfaces ,complete all as specified and directed.

M & L for rendering Cement Plaster 10mm thick (CM 1:4) on surfaces other than fair faces of brick work or on one side of lathing finished even and smooth (without using extra cement) concrete surfaces ,complete all as specified and directed.

Prepaing the surface of new plastered surface and applying three coat of white wash ,complete all as specified and directed.

Preparing new surface of ceiling and applying three coat of white wash ,complete all as specified and directed.

M & L applying two coat of cement base paint over one coat of white wash after praparing new plastered surface,complete all as specified and directed.

M & L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified for powder coating of any colour (Thickness or powder coating not less than 50 micron). all as specified and as directed by the Engineer-in-Charge.

M & L 4mm thk Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane ,complete all as specified and directed.

M & L for rendering Cement Plaster 10mm thick on ceiling (CM 1:3) on surfaces other than fair faces of brick work or on one side of lathing finished even and smooth (without using extra cement) concrete surfacest including necessary scaffolding all as specified and as directed.

M & L for Screed bed or bedding layer of 15mm thk mortar for laying any finishes ,complete all as specified and directed.

M & L for Cement concrete type D2, 1:4:8 (40mm graded aggregate) ,complete all as specified and directed.

M & L for non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engeer- in charge.

M & L for glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match ,complete all as specified and directed.

M & L for cement concrete type C2, 1:3:6 (40mm graded aggregate) ,complete all as specified and directed.

M & L for providing cement concrete copings, kneelers, apex stone, bed plates, water troughts and the like including weathering slightly rounded or chamfered angles and throating ,complete all as specified and directed.

M & L for rendering Cement Plaster 10mm thick (CM - 1:3) on surfaces other than fair faces of brick work or on one side of lathing finished even and smooth (without using extra cement) concrete surfaces ,complete all as specified and directed.

SPECIAL REPAIRS TO WIRING OF ORIS SWATI AT NOFRA, COLABA, MUMBAI

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as specified.

M&L for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes surfacing on wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :-

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

M&L for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.

S&F Modular Switch , 6Amp, One way, 1 module ,complete all as specified and directed.

S&F Modular type, electronic fan regulator ( 5 step ), 450 Watts, 230 volts, 2 module ,complete all as specified and directed.

S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals ,complete all as specified and directed.

S&F Modular Socket oulet, 6 Amps, 2/3 pin combined 2 module,complete all as specified and directed.

S&F Modular Socket oulet, 6/ 16 Amps, 2/3 pin combined 2 module,complete all as specified and directed.

S&F Modular white cover plate with Frame 2 Module, complete all as specified and directed.

S&F Modular white cover plate with Frame 3 Module ,complete all as specified and directed.

S&F Modular white cover plate with Frame 8 Module ,complete all as specified and directed.

S&F Modular white cover plate with Frame 12 Module ,complete all as specified and directed.

S&F Modular metal flush box 2 module ,complete all as specified and directed.

S&F Modular metal flush box 3 module ,complete all as specified and directed.

S&F Modular metal flush box 8 module ,complete all as specified and directed.

S&F Modular metal flush box 12 module ,complete all as specified and directed.

Supply and fix in repair baton intergrated LED channel 1x20WH accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed Make: Jaquar Glaze LED Batten Cat Part No: LGLZPCX20XC or its equivalent make in Philips/Havells as approved by GE.

Supply and fix in repair baton intergrated LED channel 1x10 WH accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed Make: Jaquar Cat Part No: LGLZ01X010XW or its equivalent make in Philips/Havells as approved by GE.

M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by engr-in-charge.

Supply and fix LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hzs, Lumen 1450 AC supply ,complete all as specified and directed. Make -Jaquar / Philips/ Havells

S&F 12 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :-

(a) MCB SPN 63 Amps, 240 Volts - 01 Nos

(b) MCB SP 6-32 Amps, 240 Volts - 10 Nos

Supply and fix in repairs sheet metal enclosure 2 way without bus bar with MCB

(a) Isolator DP 63 Amps Breaking capacity 10 KA. (C series)

Supply & Fixing of Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners ,complete all as specified and directed. Make: Havells, Legrand,Schneider.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces ,complete all as specified and directed.

Supply and fixing of 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing caping not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. Note : Two runs of 04 Sqmm cable, one run of PVC casing & caping and one run of 4 Sqmm cable shall be measured as one running meter.

S&F in repair two single core 6 Sqmm for sub main witing with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping with fixing accessories including one run of 6.0 Sqmm copper conductor. Note : Two runs of 06 Sqmm cable, one run of 6.0 Sqmm earth cable and one run of PVC casing Capping shall be measured as one running meter.

Supply and fix in repair 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC casing caping not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. Note : Two runs of 10 Sqmm cable, one run of PVC casing caping and one run of 10 Sqmm cable shall be measured as one running meter.

M&L for painting of ceiling/exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc all as directed by Engr-in- charge.

Supply and fix of Rigid non-metallic PVC casing caping/conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of medium grade, ISI mark, 25mm width double lock, for cable TV, internet, telephone cable complete all as directed.

PROVISION OF LED LIGHT FITTINGS IN OPIS TRIPTI AT NOFRA, COLABA, MUMBAI

Supply & fix Ultra-slim LED Panel 40/42 watts surface mounted made from extruded aluminium housing frame of size 1ft x 4ft with 4000 K -6000K complete all as specified and as directed. Make :Jaquar Cat No LSVR03S042XN or its equivalent in Philips / Havells as approved by GE.

Supply and fix Modular Switch, 16Amp, One way, 1 module ,complete all as specified and directed.

Supply and fix Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module ,complete all as specified and directed.

RAJENDRA CONSTRUCTION

BOB ENTERPRISES