Renovation door and windows in Old and New Ward no 13 SIMH in PGIMS Rohtak

Amount

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (HSR 13.3) 13.3.1 - Profile B 13.3.1.1 - Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (HSR 12.37) 12.37.1 - 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: (HSR 12.19) 12.19.1 - 35 mm thick shutters 12.19.1.1 - with ISi marked M.S. pressed butt hinges bright finished of required size 12.19.1.1.2 - Kiln seasoned and chemically treated Hollock wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws. (HSR 12.10) 12.10.2 - Kiln seasoned and chemically treated Hollock wood 12.10.2.1 - 35 mm thick

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.62)

Painting the wooden / metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade (HSR 11.82) 11.82.1 - Two or more coats on new work

Skyline Construction