Proposed Constrution of Bharatratna Late Lata Dinanath Mangeshkar Sangit Gurukul Vidyalay at Reservation No.246 in MBMC Area (Proposed Basic Facility Development Fund)

Amount

Description

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. SSR.No 46.11

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. SSR.No 46.09

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. SSR.No 46.12

Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed, dewaterin, preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete. ( Spec.No. : Bd.A.1Page no 259/ CSR Page No.150) SSR.No 21.02

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means SSR.No 21.08

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto adistance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary backfilling with available earth/murum, ramming, watering including shoring and strutting etc.complete. (Lift from 1.5m To 3.0m.) By Mechanical Means SSR.No 21.16

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) SSR.No 12.22

Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering complete. (Spec. No. : As directed by Engineer-in-charge /Page No. 154) SSR.No 21.4

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete SSR.No 21.37

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. SSR.No 24.10

Providing and laying Cast in situ/Ready Mix cement concrete in M30 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering ,formwork ,coverblocks ,laying/pumping ,compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel ) etc.complete ,withfully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batchmix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR.No 25.13

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. SSR.No 21.23

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. SSR.No 21.24

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR.No 25.35

Providing and laying Cast in situ /Ready Mix cement concrete M-30 of trap / granite / quartzite / gneiss metal for R.C.C.beams and lintels as per detailed designs and drawings or as directed including steel centering , formwork ,coverblocks , laying / pumping , compaction and roughening the surface if special finish is to be provided and curing etc.complete.(Excluding reinforcement and structural steel ).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batchmixplant (Panmixer) etc.complete.With fine aggregate (Crushed sand VSI Grade) SSR.No 25.54

Providing and laying Castin situ / Ready Mix cement concrete M-30 of trap / granite / quartzite / gneiss metal for R.C.C. slabs and landing as per detailed designs and drawing or as directed including steel centering, formwork, coverblocks ,laying / pumping ,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete, (Excluding reinforcement and structuralsteel ). with fully automatic microprocessor based PLC with SCADA enable dreversible Drum Typemixer / concrete Batch mixplant (Panmixer) etc.complete.With fine aggregate(Crushedsand VSI Grade) SSR.No 25.74

Providing and laying Castin situ / Ready Mix cement concrete M-30 of trap / granite / quartzite / gneiss metal for R.C.C. Waist slabs and and step s of stai cases as per detailed design and drawings or as directed including steel centering, landing formwork, coverblocks ,laying / pumping ,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete, (Excluding reinforcement and structuralsteel ). with fully automatic microprocessor based PLC with SCADA enable dreversible Drum Typemixer / concrete Batch mixplant (Panmixer) etc.complete.With fine aggregate(Crushedsand VSI Grade) SSR.No 26.26

Providing and laying Cast insitu/Ready Mix cement concrete in M-25 of trap /granite /quartzite /gneiss metal for R.C.C. Pardi of required thickness including steel entering, formwork, coverblocks, laying /pumping, compacting and rough ening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Panmixer)etc.complete.With fine aggregate (Crushedsand VSI Grade) SSR.No 26.19

Providing and fixing in position HCRM/CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR.No 26.34

Providing expansion joints in R.C.C. framed structure (interior column) with plain premoulded filler 25 mm thick including fixing T.W. battens on both face sand finishing as directed etc. Complete. SSR.No 30.01

Providing expansion joints in R.C.C. framed structure (exterior Columns) with plain pre moulded filler 25 mm thick and 3 mm thick alluminium plate, hold fast, fixing T.W. battens on internal face, finishing etc. complete as directed. SSR.No 30.02

Providing expansion joints in R.C.C. framed structure (atfloor level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and fixing T.W. battens on rear faces etc. complete as directed. SSR.No 30.03

Providing expansion joints in R.C.C. framed structure (at Terrace level) with premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate as required, bitumen poured filler and finishing etc. complete as directed. SSR.No 30.08

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part3) -1984 in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441 (Part I) - 1972) SSR.No 27.15

Providing and constructing masonry in Auto claved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS2185 Part III 1984 of size (625 x 240 x 100) mm in extra fine jointing mortar of fixoblock of in half brickthick wall including 2 hoopironstrips 25 mm x1.6 mm at every third course, properly bend and bonded at end sscaffolding racking out joints and watering compete SSR.No 29.06

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR.No 32.11

Providing internal cement plaster 12mm. Thick in Single coats in cement mortar 1:3 with out neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. SSR.No 32.04

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. Complete SSR.No 32.02

Providing and applying gypsum plaster (with Gypsum materia l) with finishing with gypsum material in 10 to 13 milli meter thickness to previously plastered surface /or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR.No 32.31

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10% or water by 15 to 20% allowing to dry for 6 to 8 hours After applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70% by roller. (With prior approval of S.E.) SSR.No 36.21

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram / 15l). plaster crack should be filled by Acrylic base Crack seal / Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist. SSR.No 50.79

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR.No 31.26

Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. SSR.No 31.07

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs.100/-with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) SSR.No 31.12

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8to10 milli meter thickness (on a existing flooring) with bonding chemical and confirming to IS15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints, curing and clearing etc. complete. SSR.No 33.61

Providing and laying Vitrified RUSTIC MATT STONE finish having decorative type tiles of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing Skirting) with bonding chemical and confirming to IS15622-2006 (Group Bla) of approved makes had eand pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc. complete. SSR.No 33.62

Providing and laying Vitrified RUSTIC MATT STONE finish having decorative type tiles of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing Flooring) with bonding chemical and confirming to IS15622-2006 (Group Bla) of approved makes had eand pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc. complete. SSR.No 33.62

Providing and laying Vitrified RUSTIC MATT STONE finish having decorative type tiles of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing Dado) with bonding chemical and confirming to IS15622-2006 (Group Bla) of approved makes had eand pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc. complete. SSR.No 33.62

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish SSR.No 33.36

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc. On C.M. 1:6 including filling joints with polymer base filler no sing / moulding the sharp edges wherever necessary, curing, etc. complete. SSR.No 33.68

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite stone for tread sand risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR.No 33.35

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram / Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete SSR.No 33.52

Providing and fixing Mangalore tiled roofing with class 'AA' tiles including securing the last course of tilesn earth eeaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing country teakwoods loping battens of 25 x 12 mm teak wood horizontal battens of 50 mm x 25 mm over the slopping battens , all iron work and coal tarring the battens etc.complete (Excluding ridge and hip tiles). SSR.No 38.02

Providing and fixing solid core flush door shutter in Double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixture sand fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. SSR.No 39.95

Providing and fixing in position , Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75 mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick, vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panel sand 12 mm thick both side laminated phenolbonded particle board panel s for bottom panels etc.,I.S.I.mark , heavy duty,Hydraulic floor spring of 150 Kilogram capacity ,having heavy duty concealed lock, necessary beading, glazing clips,PVC gaskets,250 mm length aluminium towerbolts, 150mmdia.padhandle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials,labours,andequipment etc.complete SSR.No 39.63

Providing and fixing frame with / without ventilator of size as specified with Country cut teakwood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR.No 39.01

b) Shutter: Supplying & Fixing of 75 mm thick asbestos free,fire,heat and smoke resistant composite Acoustic Door Shutter complying with with fire performance-FD 120 as per IS:3614 (part-II) comprising of 2 x 12 mm Calcium Silicate boards over Chemically treated (with Fire retardant chemical sin vaccumpressure impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141) intern altimber (Malaysian Hard Wood, densified to 810 Kilogram/cum) frame work of 100 x36 mm with 36 mm thick in fill of ceramic fiber (density 128 Kilogram/cum) ,verma culitemix faced with 6mm Firere tardant High Density fibreply, internally lipped with hardwood beading and pastedin Hydraulic Pressunder 25MPa,spray quoted with 2 coatso fin-tume scent pain to minimum 300 micron, and with single row of Brush-Type intume scent strip of size10mm x 4mm affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom and placement of 3mm thick rubber membrane,at the inside face, sand witched between calciumsilicate board & highden sity fireretardantply, without any externallipping with triplere batting in shutters,etc complete. Providing of Fire Barrier System stop revent the spread of fire and smoke within roof and ceiling voids. SSR.No 51.173

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete SSR.No 39.68

Providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size,crossings of M.S.flats of size 18 x 5 mmT or section for runner of minimum 40 x 6 mm size for flange , M.S.flat for top runner of minimum 40x12 mm with roller wheels confirming to grade F.G.150 fitted with snap heade drivet sof minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150mm between two set sof crossing swith hold fasts, stoppers,spaces,handles,locking arrangement and onecoatof red lead primer and oil painting etc. complete. (I.S. 105211983). SSR.No 33.52

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR.No 40.11

Providing and fixing mild steel grill railing 20 Kilogram / sq.m with teak wood hand rail of size 75 mm x 60 mm. and sill of 75 mm. x 25 mm. and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR.No 40.03

Providing and fixing in position anodised (as per IS1 868 / 1982 ) Aluminium fixed staggered (Z Type)Ventilator with aluminium rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Kilogram/ One Running Metre ,Aluminium angle of size 15 mm x 15 mm x 1 mm, aluminium channel of 9 mm sizes, S.S. mosquito net of 304 Grade ,4 mm thick float glass per detailed drawing and as directed by Engineer inchargeetc.complete. SSR.No 39.78

Providing and fixing of factory made uPVC Sliding window & door (White Colour)complete3 Track 3 / 6 Sash (Big Series) window frame of size 122 x 54 mm & Sash of size 64 x 47 mm SSR.No 54.09 (a)

Providing and laying for 150 mm dia salt glazed stone ware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. SSR.No 42.04

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR.No 42.2

Providing and fixing orissa type colour glazed earthenware 625 x 450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the outside face of wall including 100 mm. dia. C.I. plug, bend, 15 mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete. SSR.No 42.35

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fitting sand flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall SSR.No 41.57

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63 x 45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. SSR.No 41.7

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 mm size of approved make includings oil pipe, vent pipe upto outside face of wall, 100 mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. SSR.No 42.86

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. SSR.No 42.67

Providing and fixing on walls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR.No 42.89

Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR.No 42.90

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR.No 42.91

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR.No 42.92

Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR.No 42.93

Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. SSR.No 42.94

Providing and fixing 15 mm dia. Screw down bib /stop tap of brass including necessary socket union nut complete. SSR.No 41.40

Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. SSR.No 41.41

Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. SSR.No 41.42

Providing and fixing screw down 15 mm dia. Wheeled stop tap of brass including necessary sockets/union nut complete SSR.No 41.43

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. SSR.No 41.44

Providing and fixing screw down for 25 mm dia. Wheeled stop tap of brass including necessary sockets /union nut complete. SSR.No.41.45

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. SSR.No 41.46

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. SSR.No 41.47

Providing and fixing screw down for 50 mm dia. Wheeled stop tap of brass including necessary sockets/ union nut complete. SSR.No 41.48

Providing and fixing push cock (Self closing tap) symet type of 15mm dia.including necessary socket, testing etc. complete. SSR.No 41.54

Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram. etc complete SSR.No 42.15

Providing and fixing 15 cm x 10 cm salt glazed stone ware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stone ware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. SSR.No 42.02

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. SSR.No 42.85

Providing and fixing 75 mm dia stabiliser pipe /P.V.C. soil vent /waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete SSR.No 42.51

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete SSR.No 42.52

Water meter 80 mm diameter SSR page.No 59

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. SSR.No 42.31

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete SSR.No 42.25

Providing and Fixing FRP Cladding on Columns as directed by engineer Structure

Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete SSR.No 51.52

Providing and supplying Two level Stack parking Market rate

Curtain wall Glass facade cladding for Outdoor Market rate

Designing, Providing & Installation of Wall mural related to freedom fighter, outside the jail wall as shown in the picture below . The material for this sculpture is Fibre/FRP . The Length of the mural should be minimum 15m with minimum height of 3 m, Size of the mural shall be in proportionate to the height of the sculpture. Thickness of FRP material should be 5-10mm. Including all cost of design, Making models (if any), making mural, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCC- M20 Grade Concrete including Reinforcement(TMT/FE 500), Pedestal including all material required for fixing the mural, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of mural, polishing and painting of the mural, as directed by Engineer in Charge. (Variation in size off mural shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete. As City beautification quotation

Providing detailed layout plan of area in scale1:500 including carrying out contour survey and detailed Engineering plane table Survey with the help of 24 Alidade .The dolomite area measurement of the plot and structures ,trees ,overhead line and underground service amenities with in the area, with triangular method and giving detailes of the structures, such as total area, type of building and distance from all corners taking trial pit 0.5 x 0.5 x 2.00 m.-2 Nos. per acre and collection of record from city survey / D.I.L.R. authorities and authentication.The plan shall be traced on 75 micron polyster film and shall be submitted along with three Amoniaprints. The contour levels shall be marked at 0.5 Meter intervals.Note:-The items includes-1)Traversingworkwiththeodoliteandsteeltape .2)LevellingGridWorkoftheterrain. 3)DetailedEngineeringSurveyandcontouringworkoftheterrain. 4)Plottingwork. 5)Collection of Record. a)upto1Acre SSR.No 1.22

BASIC TEST OF CEMENT Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

BASIC TEST OF AGGREGATE.

a) Water Absorption, Specific Gravity,Impact Value, Crushing Value.

b) Sieve Analysis.

c) Abrasion Value.

d) Flakiness Index & Elongation Index.

e) Stripping Value. (for Bituminous Work)

f) Soundness

FINE AGGREGATE.

a) Fineness Modulus ( Sieve Analysis ),Silt & Clay Content

b) Chloride & Sulphate Content.

c) Silt Factor.

CONCRETE

a) Compressive Strength OF C.C. Cube (Set of 3 cubes)

b) Concrete mix design by Accelerated curing method. (By Accelerated curing method)

WATER PH Value, Sulphate & Chloride Content.

STEEL BAR TESTING

a) Upto 16 mm (Set of 3 Bars)

b) Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

SOIL / MURUM Plate Load Bearing Test.(Excluding Transportation)

Excavation for foundation in earth, soil of all types, sand, grave lands of murum, including removing the excavated material upto adistance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete.(Liftupto 1.5 m.) By Mechanical Means SSR.No 21.02

GARDEN SOIL :- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size Free from stones rubbish like dried grass roots and other such materials.The soil should be fresh be measured by measuring box (Farma) Item includes royalty charges, octroi, corporation Tax Transporting, loading – unloading etc

Farm yard manure :- Supplying on site well decayed, well dried, well powedered, withought clods and free from stones, dried grass and other rubbish material,. The colour of the manure generally be black. the manure will be measuring by measure box. (farma) item includes Transporting, loading -unloading etc (lead charges per 40km. are considered.

Preparing instant Lawn(20 cm depth) -Excavating the ground to a required depth of 20cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20cms. Mixing garden soil and manure thoroughly well, leveling, and watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling, etc. complete.

Planting large flowering/Shady trees( Ht. 2 mtr.):- Digging pit with size 0.9m x 0.9m x 0.9m,removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m. and remaining height of 0.60m.with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure thoroughly well, leveling, as directed, watering previous night, planting two to three year old minimum 2.0 Mtr. height ,healthy trees sapling as per specifications. Maintaining till well established by watering, weeding, stirring of soil replacing of casualties etc. complete.

Providing and fixing Modular false ceiling of 600 x 600mm center to center and 13mm thick square mineral fiber board to be fixed on framework of alluminium sections for suspended false ceiling consisting of alluminium T2 ”x 1½” (50mm x 40mm) weighing 0.39 Kilogram / mat60 cms center center and fixed with ½” x ½” (15 x 15mm) flanges weighing 0.19 Kilogram/ msuspended on 6mm dia mild steel rod weighing 0.22 Kilogram/ m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1½” (50mm x 40mm) weighing 0.39 Kilogram/ metc . ( all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. SSR No. 38.52

Providing & Fixing in position, Acoustical Panelling made from Printed Fabric wrapped Compressed polyester fibre non woven 9mm panels on, 50 x 50 mm sal-wood frame of 600x600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete. SSR - 51.04

12 Seater Reading Table for Library @ 3600Lx1200Dx750HT Providing and Fixing 12 Seater Reading Table for Liberary @3600Lx1200Dx750HT Top:made from 25mm Prelaminated Particle board .Alledgesare covered by 2mm.Thk .PVC edge bands glued by hot melt glue applied by auto edge banding machine.Gable Ends :made from 25mm Prelaminated Particle board .Alledgesare covered by 2mm .Thk .PVC edgebands glued by hot melt glue applied by auto edge banding machine .Modesty panel:Made from 18 mm both side prelaminated particle boards.Alledges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. SSR.No 51.33

Providing & Fixing Curviliner Workstation @ 1500/ 1500L x 600 /600D x750 HT Providing & Fixing Curviliner Workstation @ 1500 /1500L x600 /600D x750HT, Curvilinear Table Top @1500/ 1500Lx 600/ 600D:TOP tobe made of 25 mm thick Prelaminated particle board with PVC edgeband, GABLEEND tob emade of 25 mm thick Prelaminated particle board with PVC edgeband, KEY BOARD TRAY (WITHOUT MOUSE TRAY) :- Metal Powder Coated-Black Color, CPUTROLLEY :- Metal Powder Coated-Black Color, alongwith 3DRAWERPEDESTALUNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, SSR.No 51.30

Acrylic tactile audio map Design, supply, fabrication and fixing of acrylic, nonglare, tactile audio pictorial building layout as per the approved size, design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbol and uppercase Sans Serif letters of 12mm height ,raised 3mm above base plate and Grade 2/ Grade1 Braille to be integral with the sign face and be raised 0.5mm above base plate .The map to bei nstalled at the specified location as per accessibility standards, shall be oriented to the position of the viewer and to be installe data height of 800mm from the finished ground/ floor level and using the necessary hard ware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge SSR.No 51.66

Directional signage Design, supply, fabrication and fixing acrylic multil ingual Braille (raiseddots) directional sign boards of size 6"x9"designed as per accessibility standards and having 4 mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letter s of height 15 mm raised not less than 0.8 mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15 mm rised not less than 0.8 mm above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each sign board to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL and as per the directions by the engineer in charge. SSR.No 51.67

Floor Directories Providing and fixing acrylic multilingual Braille (raiseddots) ADA compliant modular floor directories system on all floors of size1.5' x 2' , showing the floor plan and the list of rooms on that floor, to be installed one ach floor near the staircase, designed as per standards and having 4mm thick blue acrylic base plate with Upper Case San Serif words and symbols made of white acrylic non glare cut out letter sof height 20mm raised not less than 0.8 mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare imported acrylic letters of height 15mm raised not less than 0.8 mm above base plate. Grade2/ Grade 1 Braille to be integral with the sign face and be raised 0.5 mm above base plate. Each directory to be fixed as per manufacturers specifications on the wall at the approved location at a height of 1200 mm from FFL and as per the directions by the engineer in charge. SSR.No 51.68

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. CSR NO 16-1-6

Supplying and erecting HMS PVC conduit necessary accessories in wall/floor with chiselling appropriately as perFRLS grade 25 mm dia. With specification NoSupplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.: WG-MA/CC. CSR NO.- 1-1-11 WG-MA/CC.

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in prSupplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BWovided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW CSR NO . 1-3-5 WG-MA/BW

Supplying and erecting Concealed type foot/step light Max. 5W having IP67. IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface with 2 Year warranty. CSR NO. 2-4-23

Supplying & erecting integral post top lantern fixtures (globe type) suitable for LED lamp upto 12 W consisting of aesthetic round clear acrylic top cover, cast aluminium pole cap on provided pole /bracket as per specification no. FGODF/ PTL. CSR NO. 2-5-4

Supplying and erecting integrated LED street light fitting 160-170W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 19000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. CSR NO 2-4-11

Supply installation & Commissioning of IoT System Controller / Gateway for electrical and allied services with Inbuilt GPRS, WIFI, LAN Capabilities for Multifunction Meters, Level Sensors , temperature sensors etc. and able to collect data from communicable device of available protocol on real time basis with following specifications 1) ARM based Controller (1.6 Ghz processor with 1.2 GB RAM with inbuilt 16GB memory 2) Inbuilt 4G/3G/GPRS modem with fallback and suitable antenna to communicate with cloud 3)Data services must be from at least two reliable service providers and system should support automatic switching to 2nd service provider in case of low network without any intervention. System should support changing of service providers without changing SIM cards 4)Gateway must have Modbus, MBUS, Ethernet and DLMS Any other future open-source protocol (that uses RS485 or TCP port) mustSupplying and fixing manageable wireless 2x2 Mesh Router, 50 m range, dualband 802.11 n/ac unified wireless access point complete as per specification no. WG-NAS/LAP1 be provided free of cost for the period of at least 1 year 5) Must have one RS485 and one ethernet port 6) The controller must send data with TLS encryption and the data on controller must be encrypted 7) Operable with 230V AC supply Gateway shall collect maximum 15-20 devices for data collection 8) Software shall support for AI application with critical alarm on mobile app CSR 6-3-20

Supplying and fixing manageable wireless 2x2 Mesh Router, 50 m range, dualband 802.11 n/ac unified wireless access point complete as per specification no. WG-NAS/LAP1 CSR 1-12-33

SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with · Rated capacity :- 15 Passenger/1020Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR/MRL [applicable for Passenger Lift with MRL only & Stretcher/Hospital Lift with MR & MRL] · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 800/900/1000 mm wide x 2000mm high · Clear Car size of ......mm wide x ......mm deep x 2250mm high CSR 17-1-15

For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid (non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. A1 (274)

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. CSR 2-10-13

Supplying & erecting UV Fly killer/ bug catcher Light Fitting having 2 x20 W UV Tube Lights to cover min. area of 500 sq.ft with powdered coated M.S./ steel body suitable to work on 230V, AC Supply having top mounting arrangement with SS chain complete and 3 core 1 mtr. flexible wire with 1 year warranty. CSR 2-1-23

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. CSR 1-6-41

Supplying and erecting white footlight with 4 modules concealed modular box and LED lights with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and mortar / POP as per required and duly connected. CSR 1-6-42

Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL CSR 2-5-5

Supplying and erecting 25 m (clear height) motorized high-mast (Top-200mm, Bottom- 560 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3+4+5 mm thickness, with base plate 25 mm thick x OD 730 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel - 316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 600 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete. specification no. OH-PL/HM (excluding luminaries) CSR 8-2-7

Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. CSR 2-4-18

S u p p l y i n g & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. CSR 13-15-1

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. CSR 1-6-1

Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base / flush type erected on filled polypropylene board or polished thick varnished double wooden block / folded or screwed board with top of either wooden / 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected. CSR1-5-5

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA CSR 9-1-6

Supplying, installing, testing & commissioning cassette type room Air conditioning unit 4TR to 4.4TR capacity with refrigerant R32/410A 415V, 50 Hz, A.C. supply having 1 no of air handling unit (Mega split) mounting type complete with temperature display on indoor unit, minimum dust filter, noise level maximum 50dBA at position as per specification no. APAC/ WAC CSR 3-2-22

Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty. CSR 2-1-22

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 100 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 17.4 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 230 Ltr etc. on provided M20 Grade CC Foundation as per specification no. GEN-DG CSR 11-1-12

Supply, installation, testing & commissioning of 4MP IP Bullet Camera with 1/2.8", progressive scan, CMOS, 4/6mm lens@ F1.8/2.0, angle of view more than 82° WDR 120db or above, Illumination Colour: 0.02 Lux (F1.8), 0.0Lux with IR, Day/Night with auto switch ICR, supported H.264/H.265 MJPEG video compression, Smart function supported motion , IP66,CE, ROHS.

Supply Installation Testing & commissioning Of Network Video Recorder 32 channel input, Support 2-ch HDMI Up to 12 Megapixels resolution recording, Support RAID 0, 1, 5, 6, 1 & 8 SATA HDDs, Up to 8TB for each HDD, Support N+1 Hot spare, Support for 12V Power output, HDMI/VGA Output, Recording Resolution, Resolution 12MP/ 6MP/5MP/4MP/3MP/1080p /960p/720p /D1/2CIF/CIF, Compression H.265/H.264, 8 SATA interfaces, Capacity up to 8TB for each HDDs, Array Type RAID 0, 1, 5, 6, 10.

Supply Installation Testing & commissioning of 6000 GB Hard Disk for video Surveillance Equivalent to:- Western Digital /Seagate

Supply Installation Testing & commissioning of 43" LED TV Monitor Equivalent to:- LG/Samsung

Supplying and fixing 6UWall Mount Rack (Dimension-DxWxH 450x550x367 mm) as per specification No. WG-NAS/RAK SSR No.1-12-17

Supplying & erecting UPS of 1KVA capacity complete with standard features, along with necessary SMF batteries for 20 mins. battery backup

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC SSR No.1-10-7

Supply , Installation, Testing & Commissioning of UTP Connector (RJ-45) as per specification No. WG-AS/UTPC. SSR No.1-12-1

Supplying, fixing, and configuring 8-ports 10/100/1000 Mbps unmanaged gigabit PoE Switch complete. SSR No.1-11-1

M/s Kranti Construction