Repair and internal painting of Type-A quarters in Sewa Vihar Colony at Mashka( J and K), Sewa-II Power Station, District-Kathua, J and K (CW-483)

Amount

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting offirst and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 kg/sqm of area for each course, second course of roofing felt type 3 grade-I (Hessian based self finished bitumen felt) and fourth & final course of stone grit 6mm & down size or pea-sized gravel spread at 6 cubic decimeters per square metre including preparation of surface but excluding grading complete with: Bitumen felt (Hessian based) type 3grade I conforming to Is :1322

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand :4 coarse sand:4 graded (: 4 graded stone aggregate) finished with a floating coatof neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregates (a) Crushed.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape,raking out joints and preparing plastering the wall surface surface with white cement based polymer modified self curing mortar, including disposal of rubbish all complete as per the direction of Engineer-In-Charge.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required manufacturers’ specifications, one or more coats on old work shade and colour complete as per

Painting with synthetic enamel paint of approved brand and manufacture in all shades to give an even shade, one or more coats on old work.

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter 35 mm thick including lSI marked M.S.pressed bright finished butt hinges with necessary screws of required size

Pushp Raj

Balwant singh