Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹21.9 L+₹62,102.50 (2.92%)Rejected-AOC NO 71 1ST CROSS MUNESWARA BLOCK PALACE GUTTAHALLI BANGALORE 560 003 | BENGALURU URBAN | KARNATAKA | 560003 | L2 | Rejected-AOC L2 | |
| 3 | L3₹22.2 L+₹98,037.50 (4.61%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹22.5 L+₹1.3 L (5.95%)Rejected-AOC H NO 243 VARADARAJ NAGAR VIDYARANYAPURA POST BANGALORE 560 097 | BANGALORE | BANGALORE | KARNATAKA | 560097 | L4 | Rejected-AOC L4 | |
| 5 | L5₹22.6 L+₹1.4 L (6.37%)Rejected-AOC NO 6 NJ BUILDING GANGAMMA TEMPLE ROAD JALAHALLI POST BANGALORE 560 013 | BANGALORE | BANGALORE | KARNATAKA | 560013 | L5 | Rejected-AOC L5 |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
4 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Yelahanka
GE (AF) Yelahanka Bangalore - 63
CERTAIN B/R REPAIRS TO VARIOUS HANGARS IN TECHNICAL AREA AT AF STN YELAHANKA
2022_MES_522579_1
8969/E8
Open Tender
Civil Works
Item Rate
270 days
AFS Yelahanka
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (AF) Yelahanka
₹44,000
24 Jan 2023
7 May 2022
6 Jun 2022
7 May 2022
4 Jun 2022
23 May 2022
60 days
Amount
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fix with self tapping screws with necessary washers/welding all as specified and directed. Note:(i) The profile, colour including crimping of the sheet to match with the existing roof pitch and profile all as specified and directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
M&L for applying metal putty in the holes on the top of hangars sheet for arresting leakage all as specified and directed.
M&L for Cleaning and repairing of Bottom Rails of Hangar doors by removing all deposited particles in the rails including Greasing and oiling all as specified and directed. The rates quoted includes the cement work and welding work wherever required as per the direction of Engr-in-Charge.
M&L for Easing of Hangar doors exc 15.00 Sqm each by Cleaning and greasing/oiling of bottom rollers/top rollers / bearing of hangar doors including cleaning of guide rails etc, complete for smooth functioning of doors complete all as specified and directed.
M&L for placing of derailed Hangar door of Minimum size10mtrX5Mtr in any position by using crane/ pulley or Jack to lift the door and cleaning the guide channel etc, without damaging the door complete all as specified and as directed.
S&F in repairs Steel Cast Iron moulded Roller wheels of hangar doors of any description and required shape and size as per the site requirements all as specified and directed.
S&F in repairs Nylon moulded Roller wheels for top of hangar doors of any description and required shape and size as per the site requirements all as specified and directed.
S&F in repairs ball bearing of any description for hangar doors all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.
M&L for Rolled mild steel work in Roof trusses Fe 410W(gde-E-250) Quality A heavy bracket framing (Beam, Tee, Angle, Channels, I sec for rail and Flat section as various members of Hangar doors and accessories all as specified and directed.
M&L for MS work as in wind ties for roof including securing bolts, flat iron fillets including all necessary drilling, bolting or riveting etc. complete all as directed.
S&F steel work as in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed.
S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe -290 Gde E-165
Dismantling expanded metal not exc. 4kg/sqm,for Bird proofing etc any thickness or mesh, fixed with steel or wooden fillets, if any complete all as specified and directed.
Supply and fix expanded metal for bird proofing not exceeding 4 Kg/Sqm cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanized steel staples complete to steel/wooden members all as specified and as directed
S&F Bird proofing mesh made of Anti bird net UV black in colour, made of material Polyolefin all weather proof co-polymer of machine knotting using CNC machines with DSLS technology for anti slip knotting, heat setting should be steam set for greater dimensional stability and knot firmness, and diameter of the twine is 1mm and the size of mesh 25x25mm (+-2mm) of square mesh and should achieve twine breaking stench of 16kgf min, MBS (Mesh breaking strength) 12 Kgf and KBS (Knot breaking strength) 22 Kgf min fixed complete all as per manufacturers instructions complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for Easing of Steel window/ventilator by cleaning and greasing of hinges for smooth functioning including necessary welding of hinges changing of hinges if required etc completed all as specified and directed.
S&F in repairs Transparent Polycarbonate profile sheet of thickness 2mm fixing in roof / wall cladding with necessary frame support and screws, bolts etc at a height of more than 6m and above .Note:-Rates includes tools and plants for fixing and removal/dismantling of existing sheets complete and all as specified and directed . Make : Tata or equivalent as approved.
M&L for demolition and removing existing roof treatment including PCC Padding concrete, tiles etc without damaging the roof surface complete all as specified and as directed.
M&L for providing cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate) as in PCC padding concrete, roof kerb, coving, benching, mud stops etc complete all as specified.
M&L for 15 mm thick cement plaster on concrete surfaces in CM 1:4, mixed with water proofing compound, finish the surface even and smooth without using extra cement complete all as specified and as directed. NOTE:WPC shall be measured and paid seperately.
M&L for Applying oil bound bituminous primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4 kg /Sqm reinforced with non Woven polyester matt weighing no less than 160gm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse direction respectively of the reinforcement, tearing strength of 180N by torch application with minimum 10 cm side over lap and 15cm end over lap, complete all as specified.
M&L for laying cement concrete tiles, 25cmx25cmx20mm thick or 30cmx30cmx20mm thick, machine pressed; with mixture of white and grey cement and pigments (any colour and pattern) set jointed and pointed in neat cement slurry in floors, and cut and polished over 20 mm thick cement screed in CM 1:4 mixed with water proofing compound, complete all as specified and as directed. Note: WPC will be measured and paid separately.
M&L for applying a coat of solar reflective Bituminous aluminium paint @ 0.1 kg/Sqm over the APP water proofing membrane complete all as directed.
Supply only liquid water proofing compound
S&F in repairs of Air roof turbo ventilators of dia 605mm made of Aluminium doom thickness 1mm (Stainless steel) with outer dia 608 mm Doom dia 380 mm ,Rotor dia 655 mm (SS), Throat dia 610mm, height 230 mm ,Weight 4kg , fixing bracing in MS and with metal base plate (Aluminium) including water proofing sealant for filling gaps including dismantling of old ventilator in any description .
M&L for Complete overhauling of existing steel gate of any description, electro magnetic gate including cleaning , lubricating the tracks, servicing the gear box , control boards, switches, remotes, including replacement of stops/bushes/sensors/locks and any other parts for easy functioning of the gate complete all as directed Note: The contractor shall stand guarantee to the Govt for a minimum period of Six months from the certified date of completion of the repair work of steel gate for the effectiveness of the work carried out
M&L for repairs to Hangar door Motor (with wire running at top of hangar gate at min height of 15 mtr) Electrical operatable Motor rewinding of industrial gear box motor capacity 7.5 to 10 HP and rewinding of copper wire , three phase motor ,50 Hz complete making to be winding of copper wire after polishing, testing all as specified and directed by Engr-in - charge. Note: The contractor shall stand guarantee to the Govt for a minimum period of Six months from the certified date of completion of the repair work of steel gate for the effectiveness of the work carried out
S&F in repairs for copper cable 2.5 sq.mm 4 core for hangar door for opening and closing all as specified and directed by Engr-in - charge.
M&L for Running welding in repairs on metal to be welded of thickness exc. 6mm but n.exc. 9mm including preparation of surface, etc complete all as specified and directed by Engr-in-charge.
Taking down steel rolling shutters push & pull type not exc 14 Sqm area of clear opening each including cover & cleaning the sides of shutter, suspension shaft and guide channel and greasing of the moving parts of rolling shutter and straightening of rolling shaft and tightening/replacement of ball bearing, bolts, nuts and any other defective parts as required for smooth functioning of shutter & refixing in same opening complete all as directed.
M&L for Replacement of ball bearing
M&L for replacement of safety lever locks mild steel with 4 levers for rolling shutters
M&L for Replacement of counter balancing spring of rolling shutters.
M&L for cleaning the surface of CGI /PPGL and Galvalume sheets in joints meeting the two sheets or overlapping from the existing steel sheets free from dust particles and laying/sticking 1.50mm thick APP membrane over a coat of (Shalibond APP) cold applied bituminous adhesive as in repairs to leakage /seepage & water proofing complete all as directed.
M&L for preparing inner surface of GI / Galvalume valley Gutter by removing caked rust / accumulated dust by using wire brush/ sand papers and filling all the visible cracks /holes and other damages using STP tarplastic ( Cold applied Bituminous compound with mineral fillers), applying a coat of Cold bituminous adhesive compound (Shalibond) in sides and bottom of gutter and laying water proofing membrane of 1.5 mm thick and finally applying one coat of Shaliurethane Bituminous Dispersed Compound (BTD) over the membrane all as per manufacturer instructions and using approved materials as in repairs . Note:- 1) The work shall be carried out only from the Authorised Applicator of M/s STP Ltd 2) The cross sectional area of valley gutter shall be and up to 1 Sqm.
Dismantling of old Ceiling boards (Fibre, pulp and insulation,etc) or insulation boards /slabs blankets, including cover fillets and frame work.
S&F in repairs of ceiling Board 12mm thick as in ceiling, laid as per manufacturer’s instructions, complete all as specified and directed..
S&F GI Snap grid false ceiling system with roll-formed made out of hot-dip galvanised iron steel grid comprising of 24mm wide T-section exposed flanges which shall be powder coated, white, main runner made from 0.33mm thick galvanised steel sheet and size 24 x 32mm and spaced at 1200mm center to center fixed to structural soffits by approved hangers of GI wire 4mm dia 1200mm center to centre using approved rawl plug, fasteners and screws. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, flush fixing of 120mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to center, size 600x 600mm modules, cross tee longer than 600mm to be supported independently on 600 x 600 mm module to be formed by fixing 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19 x 19mm and 300mm long of white colour all as per manufacturer's instructions complete all as directed
Taking down soil waste/vent/ rainwater pipes (any size or length) pattern), including all fittings,
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors including flat iron clamp for proper fixing complete all as specified & directed by Engr-in-charge. UPVC Pipes (SCH-40) ®
S&F in repairs PVC (SWR) bends 110mm dia complete all as specified & directed by Engr-in-Charge.
NOTE:The work will have to be carried out in Air craft Hangars & OTM accn of height exc 12.0m but n.exc.20.00m.Unit rate shall be quoted accordingly.
Lakkaiah Rangaswamy
Thirumala Construction
chowdeshwariconstructionco
ANAND REFRIGERATION
JyothsnaNursery
SRINIVASA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .