SPECIAL REPAIR TO BLDG NO FET-27 IN HAWK HILL UNDER AGE B/R-II UNDER GE SAUGOR

Amount

Demolition of cement concrete unreinforced in ground floors and paving n exc 15cm thickness below or above GL complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and paving n exc 15cm thickness below or above GL complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in lime mortar mortor incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 sqm each etc. complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete all as specified and directed.

Dismantling framed work in timber scantlings 40 sq. cm & over section, in fillets rail, post, rafters purlins etc in any position complete all as specified and directed.

Dismantling wrought iron or mid steel work in any position complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed

M&L for approved earth filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed.

M&L cement concrete 1 : 3 :6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm average thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound complete all as specified and directed..

M &L for Brickwork with subclass 'B' bricks, old size straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth etc. complete all as specified and directed.

M&L Rendering 10mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) and 5 mm thick in second coat including water proofing compound @ 2% by wt of cement complete all as specified and directed.

Supply only WPC complete all as specified and directed.

M & L for applying birla/J.K wall care white putty 1 mm thick in two layers for levelling the surface and two coats exterior weather coat ( Apex paint or equivalent) over one coat of exterior primer over newly plastered surfaces of walls ,chajjas, complete all as specified and directed.

M & L for complete removal of existing treatment and applying birla / J. K. wall care white putty 1 mm thick in two layers for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coats exterior weather coat ( Apex paint or equivalent) over one coat of exterior primer incl. preparation of old surfaces of walls etc complete. of walls ,chajjas, complete all as specified and directed.

M&L for applying two coats of acrylic Emulsion, white or tinted over a coat of wall primer and applying birla / J. K. wall care white putty 1 mm thick in two layers for levelling the surfaces on new wall surface including preparation of surface complete all as specified and directed.

M & L for complete removal of existing treatment and applying birla / J. K. wall care white putty 1 mm thick in two layers for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of acrylic Emulsion over a coat of wall primer incl. preparation of old surfaces of walls etc complete all as specified and directed.

M&L for Applying three coats of white wash on newly plastered surface including preparation of new surface complete all as specified and directed.

S&F for 8 to 10 mm thick coloured vitrified tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Ditto all as per item no. 23 above but in dado / skirting etc. over and including 10mm thick rendering in cm (1:4) complete all as specified and directed.

M&L for machine cut Kota stone slab 18 mm to 20 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:3 ) complete all as specified and directed.

M&L Kota stone slab 12-15 mm thick mirror polished in skirting, steps riser etc over and including 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles, over and incl 15mm thick screed bed or beding layer in cement mortar complete all as specified and directed.

Material & labour for glazed ceramic tiles of size 600x 300 x 7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match over 15 mm thick rendering in CM 1:4 complete all as specified and directed.

S & F GI ( cold rolled) snap grid size of 595mm x 595 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F coloured Non Asbestos designer ceiling cement boards 4 mm thick including dismentaling of existing ceiling any type complete all as specified and directed.

M&L second class hardwood in scantlings , timber clean sawn framed and fixed including dismantling unframed timber scantlings 40 sq. cm & over in section, in any position. .including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair 18 mm thick marine plywood interior grade with 1 mm thick white mica lamination on one side and 1 mm thick coloured mica on another side fixed in as cubboard shutter and kitchen cabinet complete all as specified and as directed .

M& L for external teak wood lipping, 6 mm thick, fixed with nails for 18/19mm thick plywood including necessary prepartion and polishing complete all as specified and directed.

S&F 100mm long hasp and staple, safety type Aluminium with MS hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed

S&F continuous (piano) hinges, 30mm, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.

S & F Factory made Solid PVC prelam Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be moulded with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed.

S& F glazed (4.5 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83 x 44 mm , bottom rail & lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangement,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc complete (Al. section thickness 1.2 mm } ) confirming to IS complete all as specified and directed.

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm, half portion will be fixed with 3mm thick frosted glass and half portion will be fixed with louvers with 3mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.00 kg/sqm),aluminium wire mess 0.36 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. (Al. section thickness 1.20 mm }

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 31 mm,sideand top of size min 92.34X29.70, shutters vertical 39X18 mm,shutter top &bottom of size min 18X39 mm ,shutter interlock min size 39X18 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading ,stainless steel wire mess 0.30 mm dia and width of aperture 1.45 mm etc including necessary cutting holes on wall and floor complete all as specified and directed. (Al. section thickness 1.20 mm }

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.

S&F Steel work in tubular trusses posts (of round/ rectangula/square hollow section)including angle cleats for jointing with welding complete all as specified and directed

S & F Rolled sections (of round/ rectangula/square hollow section) including angle cleats as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of grade Fe-290 (Gde E- 165) complete all as specified and directed

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 11 to 15 mm complete all as specified and directed.

S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment GDE Fe410-0 or Fe 310-0 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessarystainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for RCC Nominal Mix (1:1.5:3) type A-1 using 20 mm graded stone aggregate as in Beams, Cantilevers, bressummers, lintels over 1.5m span, coping over wall complete all as specified and directed.

Supply and fixed 16-18 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc complete all as specified and directed.

M& L rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations etc complete all as specified and directed.

S&F in repair 25 mm bore SS conduit drapery rods, suitable for door/widows curtain with fancy type SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed.including taking down 15 mm dia GI tubing and connection complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed including taking down 20 mm dia GI tubing and connection complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm(AZ- 150) corrugated steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws, including dismantling old plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

S&F 0.45 mm thick galvalume sheet precoated coloured ridge corrugated suitable for profile pattern sheet fixed with self driving screws, including dismantling old plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including dismantaling of old tank with all fittings complete all as specified and directed.

S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall including ms clamps complete all as specified and directed.

S&Fin repairs PVC (SWR) pipes 110mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with adhesive joints fixed to walls complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed.

S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant etc. complete all as specified and directed.

S&F for Mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

S&F for Mild steel TMT bars6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

S&F Fixing Brass Bottle Trap for wash basin connected from wash basin coupling complete all as specified and directed.

S&F for Single lever concealed high flow diverter ( 46 mm ) bath & shower ( forged Body) ( internal concealed body, upper external part plate & handle ) along with all accessories complete all as specified and directed

S&F for Bath tub Spout with flange along with all accessories for connecting in diverter complete all as specified and directed

S&F in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs health faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe ,cast copper alloy complete all as specified and directed.

S&F in repair C P bib taps, cast copper alloy fency concealed type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.

S&F in repairs 2 way bib cock with single knob 15mm dia chromium plated, cast copper alloy complete all as specified and directed.

Supply and fixed in repair angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs central hole basin mixer /Sink Mixer chromium plated 15mm dia as in wash basin (fancy type ) complete all as specified and directed.

S&F Stainless steel kitchen plate rack of size 31" X 30" X 8" complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair etc complete all as specified and directed.

S&F in repairs purposely moulded looking mirror 5 mm thick glass fixed with studs complete all as specified and directed.

S&F in repairs glass shelf assembly 60 cm long 5 mm thick glass , CP guard and fixed to wooden plug with CP screws and cup washer complete all as specified and as directed.

S&F in repairs corner glass shelf assembly 30 cm with 5 mm thick glass , CP guard and fixed to wooden plug with CP screws and cup washer complete all as specified and as directed.

S&F PVC connection on pipe 450 mm long with brass nut bolt complete all as specified and directed.

S&F in repairs vitreous China, wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) WC complete all as specified and directed.

S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.

S&F for sinks made out of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed fixed in repair.

S&F PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and as directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend etc. complete all as specified and directed.

S&F Vitreous China full size table top counter wash hand basin including waste pipe complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of RCC in any thicknes (reinforced cut as required to facilitate demolition ) complete all as specified and directed.

Demolition of cement concrete in any description and in any position not otherwise specially provided complete all as specified and directed.

M&L Plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundations / mass Concrete complete all as specified.

M&L for Brick work with sub class 'B' bricks, old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 Complete all as specified and directed

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping, kerb, haunching etc including necessary formwork complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in Drain and surface channel complete all as specified and directed. (forming fair finished to drain and channel/ drain shall be measured and paid separetly)

M&L,precast cement concrete 1:1.5:3 type A1 using 20mm graded BT stone agregate including necessary form work as in manholes cover slab etc, set in cement mortar 1:4 complete all as specified and as directed. (Note :- Re-inforcement shall be measured and paid for separately under respective items of Sch 'A' here in after)

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for pipe line or for manholes not exceeding 10 Sqm on plan and not exceeding 1.5m in depth in all kind of soil and getting out complete all as specified and as directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and as directed.

Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified complete all as specified and as directed.

M&L for sand cushioning in trenches for the cable etc complete all as specified and as directed.

S&F in repair HDPE double wall corrugated sewage pipe of 100 mm internal bore, SN-8, ISI marked as per IS 16908 Part-II-2013 laid in trenches, jointed and tested as per manufacturer instruction complete all as specifed and directed.

M&L Concrete bed to drain pipes including packing under and haunching against the sides of pipe as cradle after they are laid and tested in cement concrete 1:3:6 type C-2 (Nominal mix) using 20 mm graded crushed stone aggregate for 150 mm bore pipes complete all as specifed and directed.

M&L for Rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:4) finished even and fair complete all as specifed and directed.

M & L for coloured designer tiles exterior grade ( ENDURA OR Equivalent ) 400mmx400mm, 9 to 10 mm thick over and including 15 mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor etc including dismentalling of existing parking tiles/Intrlocking complete all as specifed and directed.

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc. complete all as specified and directed.

Taking down main switch, DB of any capacity complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm PVC-FR insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed.

For one light, fan point controlled by one switch

For one call bell point controlled by one push button switch.

For one 5 Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per item No 113 here in before but for power point wiring using with 2.5 sqmm PVC-FR insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed.

S&F Modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed.

S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed.

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed.

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed.

S&F Modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed.

S&F modular fan step regulator 120W, 2 module complete all as specified and directed.

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

All as per item no 123 above but SPN 32-40 Amps, 240 V complete all as specified and directed.

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed.

M&L LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed.

S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 63 MCCB as incomer 6 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed.

S&F MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed.

S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable complete all as specified and directed.

S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM complete all as specified and directed.

S&F modular bell push 6A ,1 module complete all as specified and directed.

Taking down and refixing connecting electric meter SP up to 60 amp incl S & F suitable board close recessed type of suitable size complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Taking down and refixing connecting electric water heater (Geyser 25 ltr) Incl supply and fixing of pvc pipe, fasterner complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L concealed sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, with remote and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed.

M&L for GI pipe bracket of size 40 mm dia medium grade of length not less than 1.5 Mtr long and bent to a shape incl fixing wall with 02 Nos MS flate clamp of suitable size incl nut bolt and washers complete all as specified and as directed.

M&L for provn of Earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

Taking down old service cable and Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 35 sqmm 3.5 core complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

S&F in replacement of GI Pipe light grade 50 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed.

Shri Balaji Associates (BID ID -3494086)

NIHAL ENTERPRISES (BID ID -3500616)