SPL REPAIR TO INTERNAL ROAD IN THE AREA OF AGE B/R-I UNDER GE GWALIOR

Amount

Scarifying or picking graveled macadam or bituminous macadam surfaces in area n exc 400 sqm each and depth exc. 50 mm but n. exc 100 mm complete all as specified and directed.

M&L for 75mm (compacted thickness) water bound macadam in one layer of 75mm thick (each layer to be rolled and consolidated separately) with coarse aggregate of granite/black trap/basalt stone of grading 2 ranging from 63mm to 40mm, hollows made up to from true surface, spread, surface binding with and including screening and moorm, watered, consolidated and rolled with 8 to 12 tonne power roller to gradient and camber required complete all as specified and directed.

All as per Ser item No 2.00 above but except materials (materials obtained from item No 1 shall used) complete all as specified and directed.

M&L for preparing surfaces or un-surfaced WBM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10, @ 10 kg per 10 sq metre complete all as specified and directed.

M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10 @ 5 kg per 10 sq metre complete all as specified and directed.

M&L for Premix bituminous macadam with using paving bitumen VG-10 as 4 % of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.

M&L for providing bituminous premix asphaltic semi dense concrete (design mix) 30 mm consolidated thickness with 5.5% binder content by weight of total mix, with using paving bitumen VG-10 laid/spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed. Note :- (i) Filling of any pot holes (coming in the area to be re-carpeted) in the above item not exc 30mm depth by material of premix asphaltic semi dense concrete is deemed to be included in the quoted rate.

M&L for repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and directed.

S&F in repair ABS engineering plastic road speed breakers dynamically designed having high impact reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and size 750x75x250mm incl fixing with epoxy screed bed all as per manufacturer direction complete all as specified and directed.

S & F in repair retro reflective Studs (Cats Eyes) of size (100mm x 100 mm x 20 mm with PAMA atriplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufacturers instructions complete all as specified and directed.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

S&F in repairs convex mirror 1000mm dia made of PC material provided with suitable MS pipe post of 3" dia medium grade with 1.5 Mtr long, duly powdered coated/painted as per site requirement, clear & definite mirror, image having 130 degree of viewing angle, unbreakable and stronger than glass, incl surface dressing and PCC 1:2:4 using 12.5mm graded aggregate (size of post holes = 450mmx450mmx600mm) complete all as specified and directed.

S&F in repairs stainless steel boards of high intensity reflect i.e. single side, sign boards made of hardened ACP sheet 2mm thick POP inveted to stainless rectangular pipe of size 50x25mm frame of size 900x1200mm, frame supported with bolts over 60mm round 2.1 mtr(above ground) long stainless steel pipe of 16 guage with stainless bonded clamps. All stainless steel parts should be polished. Sign boards should be reflective on one side with wide HIP sheet and overlay film or any colour with computer cut letters, sign and bolder all as specified and directed.

M/s Bijender Singh

M/S LAKSHYA CONSTRUCTIONS

sri sainath constructions

M/S J J ENTERPRISES

M/S MAKHIJA TRADERS

M/s Raghav Traders