SMART PERIODICAL SERVICES TO OTM AND MD ACCN AT HARIPUR RANGE, PARJIYA KALAN AND JALANDHAR CANTT UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

M&L for prepration of old surfaces of walls including brooming down or steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (Plastered or unplastered surfaces) and applying one coat of white (lime) wash complete all as specified and directed.

Ditto all as per item No 01 above but one coat of white wash on ceiling complete.

M&L for prepration of old surfaces of walls including brooming down or steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (Plastered or unplastered surfaces) and applying one coat of oil bound distemper complete all as specified and directed.

Complete removal of existing treatment of walls, washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bound distemper (QBP) over a coat of primer over and a coat of wall putty complete all as specified and directed..

Complete removal of existing treatment of walls, washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of plastic emulsion paint over a coat of primer over and a coat of wall putty complete all as specified and directed..

M&L for prepration of old surfaces of walls including brooming down or steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (Plastered or unplastered surfaces) and applying one coat of cement based paint applying by mechanical spray gun complete all as specified and directed.

Complete removal of existing treatment of walls, washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of cement based paint applying by mechanical spray gun complete all as specified and directed..

M&L for complete removal of existing treatment of old decorated wall scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (Plastered or unplastered surfaces) etc and applying one coat of acrylic exterior emulsion paint over a coat of wall primer applying by mechanical spray gun complete all as per manufacturer instruction and as specified and directed by Engr-in-Charge.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for water proofing cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old painted surface of wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M & L for one coat of acrylic water based exterior grade primer @ 0.9 lit (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and Allow 6-8 hours to dry the surface for painting of subsequent coats.

M & L for water based premium acrylic smooth exterior emulsion of approved colour witgh silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in two coats @ 1.79 lit (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc any description complete all as specified and directed.

M&L for Plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete walls, finished even and fair without using extra cement to match with the existing surfaces including WPC,Complete all as specified and directed.

M&L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete walls, finished even and smooth without using extra cement to match with the existing surfaces,Complete all as specified and directed.

M&L for prepration of new surfaces of ceiling including cornices, pilasters etc and applying three coats of white (Lime) wash complete all as specified.

M&L for prepration of new surfaces of walls including cornices, plasters etc and applying two coats of cement base paint complete all as specified and directed.

M&L for prepration of new plaster surfaces of walls and applying two coats of oil bound distemper including a coat of primer on plastered surfaces over a coat of wall putty complete all as specified.

Disconnecting float valve with float arm from PVC service water tank of any capacity, empting stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and finally washing the internal surfaces with bleaching powder, closing wash outlet, re fixing float valve in proper position, closing the top cover including minor repair if required and testing complete all as directed.

S&F in repairs 20mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed,complete all as specified and directed.

S&F 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.

S&F 1000 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.

Uprooting of trees,grass,bushes etc from brick wall/roof tiles or any surfaces of bldg including dismantling the requried brick work /rooftiles/mud concrete etc for uprooting the vegetation etc and make good the same to match existing surfaces with same material or concrete 1:2:4 type B-1 after pouring the chemical (which destroy the growth of vegetation to place where vegetation removed).The rate shall include for scaffolding or any other arrangment required during this process upto 10 mtr height complete all as specified.

Note:- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same. (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover-I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned.

M/s GURFATEH BUILDERS (BID ID -3355262)

ASHOK KUMAR MAHAJAN (BID ID -3357831)

M/S Parshant Associates (BID ID -3355141)

SANDEEP JHANJI CONSTRUCTIONS (BID ID -3359150)