SPL REPAIR TO BLDG NO P-5/6 (OR LIVING HQ BTY) OF FD REGT AT MIL STN JAMMU

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed.

S&F pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed

M&L for 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed

S&F pressed steel frames of size 60mm x40 mm made out of size 1.25 mm thick MS sheet for cup board with rebate of 20mm wide and 12 mm deep including cement concete 1:2:4 type B-1 as in back fill to chowkats complete all as specified and directed.

S&F in repair continuous (piano) hinges, heavy duty, mild steel ,bright finish or electrogalvanised suitable for 19mm thick shutter complete all as specified and directed.

M&L for prelaminated MDF board (exterior grade) 18/19 mm thick as in shutters /shelves ,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including lipping (15mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and directed.

S&F hasp & staple 75 mm in length, safety type, aluminum anodised with steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight,fixed with screws complete all as specified and directed

S&F aluminium anodised barrel tower bolts, 200mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F aluminium anodised , cast type handle 150mm size complete all as spcified and directed.

S&F aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with welding complete all as specified and directed

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials at both ends and necessary fittings complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified directed.

S&F steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS pintle hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm square bar as grill, spacing 100 mm c/c all as per drg and including 4 mm thick flat iron for fixing of grill all around and fixing arrangement as per drg No CEPZ/TD-324,325 complete all as specified and driected.

M&L for framed work such as grills , gratings etc with ends of bars shouldered and /or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters: walk ways , railings frame work of water tanks and similar work confirming to Fe290, Gde E-165 complete all as specified and directed

M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with glazing pins, oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth , 0.56 mm normal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass, shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

M&L for granite work 16 to 18 mm thick any colour (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 15 mm thick screed bed in cement mortar 1:4. complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as complete all as specified and directed .

M&L for plain cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies etc. including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

Dismantling PVC/CI pipes 110 mm dia including all fittings and removing from site complete all as specified and directed

S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F UPVC (SWR) bends any radius, 110 mm bore complete all as specified and directed

Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed

All as per Srl item No -29 here-in-before but except bricks complete all as specified and directed

M&L for brick work with old size sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed .

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface,surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facia ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 (using 12.5mm thick crushed stone aggregates) or with 15mm thick rendering in cement mortar 1:3 without using extra cement,surface finished even and fair (as per site requirement) complete all as specified and directed. (Note:- Quoted rated shall be deemed to include:- (i) formwork and scaffolding required & taking down or dismantling as per site requirement (ii) The work is to be executed upto 4th storey building

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over two coats of wall care putty 1 mm thick each and one coat of primer complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of weather proof acrylic emulsion paint over 1 mm thick wall care putty and one coat of primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper over one coat of wall care putty 1 mm thick complete all as specified and directed.

M&L for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coats of weather proof exterior emulsion paint including necessary filling of wall care putty on uneven surface as and where required complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts, treating oil and greasy spots and applying two coats of white wash complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floor, laid, bedded and pointed in any mortar complete all as specified and directed,

M&L for glazed ceramic coloured digital tiles,450x300x8 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F 8 to 9mm thick,vitrified ceramic, any shade, polished (coloure & shade as approved) area of each tile n.exceeding 0.36 sqm as in floors etc using 4 mm spacers, set and jointed in neat cement slurry and pointed in white or coloured tile epoxy grout as per the manufacturer specifications to match the colour of tile over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

S&F 8 to 9mm thick,vitrified ceramic, any shade, polished (coloure & shade as approved) area of each tile n.exceeding 0.36 sqm as in vertical surfaces such as skirting / dado etc using 4 mm spacers, set and jointed in neat cement slurry and pointed in white or coloured tile epoxy grout as per the manufacturer specifications to match the colour of tile over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. .

M&L for 25mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in sub base/ levelling course of floors, finished even and fair complete all as specified and directed.

Dismantling wall and ceiling boards (fibre,pulp, insulation) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified & directed.

S&F GI snap grid frame work (Grid size 605mm x 605mm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed ..

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in padding over roof, finished & laid to required slope complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces of roof finished even and fair including mixing of water proofing compound as per manufacturer's instructions complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately as supply only.

Supply only Integral water proofing compound

Dismantlling of brick tiles or terracing tiles , single layer on roof etc, serviceable tiles taken to store and removing the rubbish from the work site to out side defence premises complete all as specified and directed.

Complete removal of mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Removal of APP membrane including under layer, taking down of cement plaster/ demolition of cement concrete of any thickness from existing water proofing treatment and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel bushes and cleaning with water to remove all loose dirt/dust and apply water proofing treatment in the following sequences :- (a) Applying 1st course of bituminous primer confirming to IS-3384 @ 0.4 Kg/sqm .Cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely. (b) Applying 2nd coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.0 Kg/sqm with 160 Grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat complete all as specified and as directed . (d) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer.

M&L for applying two coats of aluminum paint over the APP membrane complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the rubbish from the work site to outside defence premises complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for and removing the rubbish from the work site to outside defence premises complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded crushed stone aggregates) as in sub base finished even and fair complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D2 (using 40 mm graded crushed stone aggregates) as in sub base finished even and fair complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigment, set ,jointed and pointed in neat cement slurry as in floors, laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L for providing and laying 60 mm thick factory made charmfered edge cement concrete paver block of M-35 grade of approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 , type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. surfaces finished even and fair including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:2 complete all as specified and directed .

Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells etc & making good the disturbed surfaces of walls/ceiling, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.

Taking down of unserviceable sub main wiring of any size complete all as specified and directed.

Taking down of unserviceable MCB DB, SPN /TPN along with MCB's complete all as specified and directed.

Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit of suitable size with all accessories such as bend, reducers, MS hooks including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, stranded connected to common earth point dolly for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications.

All as per Srl item No 71 here-in-before but for one socket outlet, 3 Pin 5 Amps, 230 Volts on independent board complete all as specified and directed

All as per Srl item No.71 here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed

All as per Srl item No 71 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed

S&F modular type switch, one way 6 Amps , 1 module complete all as specifieds and directed .

S&F modular type socket 3 pin, 6 Amps, 2 module complete all as specifieds and directed .

S&F modular type switch, one way, 16 Amps, 1 module complete all as specifieds and directed .

S&F modular type socket 3 pin, 6 A/16 Amps, 2 module complete all as specifieds and directed .

S&F ceiling rose, surface backelite, three terminal, 240 volts complete all as specifieds and directed .

S&F LED light fitting 1 x 18Watt, 220V, Integrated batten type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with all fixing arrengenment complete all as specifieds and directed.

S&F energy saving new generation 10W LED bulk head luminaire with opal diffuser, IP 65 and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 Hz complete all as specified and directed.

S&F Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 230 Volts,8 ways with 100 amps rated copper bus bar complete all as specified and directed

S&F MCB SPN, 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed .

S&F MCB Single pole, 6 to 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed .

S&F Submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathed FRLSH copper wire 6 Sqmm for continous earth wire drawn into and including concealed PVC conduit of suitable size complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length)

Taking down ceiling fan of any size , dismantling blades and removing fan for depositing in MES Store Yard complete all as specified and directed .

S&F ceiling fan complete with blades,clamp, hooks and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) with compatible regulator and fixing of hooks by anchor fastner including connecting from ceiling rose/connector with & including flexible copper cable of suitable size complete all as specified and directed .

S&F factory made epoxy polyester powder coated distribution board TP&N ,4 ways (VTPN DB), double door,(concealed flush to wall) (IP-43 protection) fabricated from minimum 1.2 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 250 Amps bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with space for provision for 4 pole MCCB as incommer and outgoing MCBs as required at site and conforming to IS: 8623 along with cable end box including making good disturbed surface complete all as specified and directed. NOTE: (a) MCCBs and MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of BoQ..

S&F MCCB, 4 Pole,adjustable type ,415 V, 100 Amps with breaking capacity 16 KA including making good the disturbed surfaces complete all as specified and directed.

M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed ..

M/S ANIL MAHAJAN (BID ID -3261263)

M/S SHAKTI STEEL INDUSTRIES (BID ID -3256018)

M/S Shesh Paul Gupta (BID ID -3260683)

J P TECHNO (BID ID -3253447)

M/S RAKESH CONSTRUCTION (BID ID -3255341)

M/S VED PAUL MAHAJAN (BID ID -3255281)

CELMAC REGD (BID ID -3261247)