Wash room for operators and compressor room under ramp for DRDO oxygen concentrator plant at SKIMS.

Amount

Making the opening for door/window/clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground.

Engagement of labour for Clearance of site

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. ( All kinds of soil :)

P/l soling including compacting ramming and all carriage etc.complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: ( 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all carriage.

Centering and shuttering including strutting, propping etc. and removal of form work for: (Foundations, footings, bases for columns)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : ( Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriage.

12mm Cement plaster of mix:(1 : 6 ( 1 cement : 6 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): ( First class kail wood)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. ( With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws(35 mm thick)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : ( First class kail wood) (35 m thick)

P/F of hardware Fittings of approved quality:-

Link lock of approved make 10”

Aluminum Handle 4”

Aluminum Tower Bolt 4”

Hinges 6”

Providing and fixing 1st quality ceramic glazed floor tiles conforming To IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work

P/f water closet squatting pattern(Indian W.C Pan) of approved make 580*440 mm including cost of plate form.

P/f of PVC cistern 10 ltrs capacity complete of approved quality.

P/F of C.P long bend (40 mm dia)

P/f of white vitreous wash basin with pedestal approved make 630*450 mm size

P/F of PVC pipes and fittings of approved make

P-trap 100 mm

i-trap

Door function

Plain bend 100 mm

Plain bend 70 mm

Reducer 75 mm

100 mm dia pipe

75 mm dia pipe

50 mm dia pipe

Cowl 50 mm

Coller 100 mm

Coller 75 mm

Coller 50 mm

P/f of G.I pipes complete with G.I fittings and clamps including cutting and making good the walls etc.

15 mm exposed

15 mm concealed

Union 15 mm

Gate valve 15 mm

Construction of brick masonary chamber for underground C.I inspection chamber and bend with common burnt clay 455*610 mm inside dimension and 4.5 cm deep for single pipe line including man hole cover complete job.

P/l of 200 mm dia RCC NP3 pipes with cement concrete joints including excavation in hard soil 2’ dia deep and 2’ width including laying of sand cushion of 1’-6 around the pipe and refilling by available material.

BILAL AHMAD TARFAROSH

M/S AADEEB SHAFAT