ADDITION ALTERATION AND SPECIAL REPAIRS TO SHAFT AND TOILETS OF 200 MEN IN LIVING SAILORS BLOCK BLDG NO T 42 AND SCULLERY OF JUNIOR SAILORS DINNING HALL AT INS CHILKA UNDER GE CHILKA

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not packing) removing of serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for coloured non skid ceramic tiles not less than 6 to 7 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 375mmx250mmx 6 to 7mm / 450mmx300x6to7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exceeding 50m complete all as specified and as directed.

S&F 5000 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet , overflow and wash out connections including dismantling existing unserviceable water tank complete all as specified and as directed.

S&F 40 mm bore dia ball valve , high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (mininimum weight -690 gms) complete all as specified and as directed.

S&F in repair 15 mm bore bib tap chromium plated copper alloy 'fancy type' with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair PVC soap tray ,fixed with screw to the wall complete all as specified and as directed. Make :- Prayag Cat No 195 or equivalent as approved.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long, with and including plugs complete all as specified and as directed.

S&F in repair Shower rose Brass chromium plated of size 125 mm with swivel joint, fixed to 15mm dia GI pipe including galvanised iron elbow and nipple complete all as specified and as directed. Make:-Parryware or equivalent as approved.

S&F in repair 15 mm bore dia stop valve ,fancy type , chromium plated with crutch or butterfly handle ,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair chromium plated Health faucet 1.5m tube with hook and including all necessary fitting complete all as specified and as directed Make :- Prayag Cat Part No 452 or equivalent as approved.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) ,white including fixing bolts (excluding flushing cistern & Pipe) including necessary connection to trap and flushing pipe complete all as specified and as directed.

S&F in repair plastic water closet seat, white,closed pattern with flat bottom and cover with mild steel chromium plated hinging device complete all as specified and as directed

S&F in repair PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repairs vitreous china urinal bowl flat back of size 465mmx355mmx265mm white (minimum) with grating, union for discharge and waste coupling including fixing plugs, bedding urinal against wall in cement mortar 1:2 ,securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F vitreous china wash hand basin , white flat back of size 580mm X 450mm with fixing brackets including 15 mm bore chromium plated pillar tap other fixing accessories including necessary connection and fixed complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600 mm long complete all as specified and as directed.

S&F in repair 40 mm bore Low density polyetylene pipe(LDPE) of pressure rating 6kgf/cm2 as in waste pipe to wash hand Basin/Kitchen sink /urinal complete all as specified and as directed.

S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F 100 mm dia of PTMT grating doom(minimum weight 25 gram) complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) branch piece, double (doubleY) equal or unequal complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single,(singleT) equal or unequal complete all as specified and as directed

S&F 110 mm bore PVC (SWR) junction single,(singleT) equal or unequal complete all as specified and as directed

S&F 110 bore PVC (SWR) vent cowl complete all as specified and as directed

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 32 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 40 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 50 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Fixing only 15 mm bore old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified & directed.

Fixing only 20 mm bore old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified & directed.

Fixing only 25 mm bore old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified & directed.

Fixing only 32 mm bore old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified & directed.

Fixing only 40 mm bore old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified & directed.

Fixing only 50 mm bore old GI steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified & directed.

S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow, rducers etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 20 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow, rducers etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 25 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow, rducers etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 32 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow, rducers etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 40 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow, rducers etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 50 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow, rducers etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F in repair 20 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 32 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 40 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 50 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L 5 mm thick rendering in cement mortar 1:3 as in ceiling, surface finihsed even and fair complete all as specified and as directed.

M&L 10 mm thick rendering on brickwork or concrete surfaces in cement mortar 1:6,surface finished even and fair complete all as specified and as directed.

M&L for 15 mm thick rendering (in two layers) on brick work or concrete sufaces, Ist layer 10 mm thick in cement mortar 1:4 and 2nd layer in cement mortar 1:4 mixed with WPC @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from frame) area not exceeding 1.5 sqm each complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from frame) area exceeding 1.5 sqm but not exceeding 4sqm each complete all as specified and as directed.

Taking down and refixing of Chowkats or frames exceeding 1.5 sqm but not exceeding 4 Sqm each in same opening complete all as specified and as directed.

Taking down and refixing the shutter in same opening of any description exceeding 1sqm abut not exceeding 2 sqm each complete all as specified and as directed.

Cutting holes in brick walls or stone wall exceeding half brick but not exceeding one brick for inserting holdgfast and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as required complete all as specified and as directed.

S&F mild steel work as in flat iron for hold fasts complete all as specified and as directed.

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowkats complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm , fixed to aluminium joinery or wooden joinery complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window/ventilator shutters of side hung type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, screws,anodised aluminium fittings such as peg stay 150 mm long (2 No)suitable handle (1 No) complete all as specified and as directed. Note :- Glass shall be measured and paid seperately under respective item as considered therein.

Supply only 4.0 mm thick frosted glass and glazing in squares not exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery work complete all as specified and as directed.

S&F anodised powder coated of any colour (thickness of powder coated not less than 15 micron) aluminium grill of make "Deco grill" and DG-202 model with aperature size 60mmx45mm fixed with suitable channel complete all as specified as directed Make :- Jindal/Hindalco/M/s Ajit India Pvt Ltd

S&F 300 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 150 mm long aluminium barrel tower bolts of extruded section omplete all as specified and as directed.

S&F 125 mm long aluminium handles cast type, anodised complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preperation of new wooden surfaces of any description , not otherwise described over 10cm width or girth complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with MS Square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails M.S frame shall be covered with heat moulded both side Prelam PVC sheet using PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exceeding 50 m complete all as specified and as directed.

M&L 10mm thick screed bed in cement mortar 1:3 mixed with water proofing compound on sunken floor over concrete surfaces complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately under respective item.

M&L cement concrete 1:5:10 type E-2 using 40 mm graded stone aggregate as in mass concrete in sunken floor complete all as specified and as directed.

M&L 40 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub base of Sunken floor, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for water proofing treatment to sunken surface complete all as specified and as directed with the followings specification:- (i) applying evenly a tack coat of industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm over the prepared surfaces. (ii) Apply APP modified polymeric membrane of weight not less than 3.0 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions.

S&F in repair 0.56 mm thick plain aluminium sheeting Alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the places can be cut) complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for applying one coat of white wash on walls including preparation of old decorated plastered surfaces, washing rubbing down etc as required complete and complete all as specified and as directed.

M&L for applying one coat of white wash on ceiling including preparation of old decorated plastered surfaces, washing rubbing down etc as required complete and complete all as specified and as directed.

Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100M complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layer in cement mortar 1:3 on concrete,brick surfaces surface finished even and smooth without using extra cement to receive roof treatment, mixed with water proofing compound @2% by weight of cement over and including a neat cement slurry @ 3 Kg/Sqm , complete all as specified and as directed.

M&L for water proofing roof treatment with APP based polymeric membrane of minimum weighing 3kg and minimum 3 mm thick and reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including priming the surface by bitumineous [email protected] litre per Sqm,applying with a coat of hot blown bitumen of grade 85/25 @ 1.2 kg/Sqm each at bottom and top of the membrane as bonding material and a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Demolition of brick work or stone masonary built in cement mortar or cement lime mortar including all quoins,arches, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping and the like including necessary use and waste of formwork complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance exceeding 50 m but not exceeding 100 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L for broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm garade stone aggregate as in plinth protection/ path complete all as specified and directed .

M&L 15 mm thick rendering on brickwork or concrete surfaces in cement mortar 1:6,surface finished even and fair complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L Rounding to edges of stone slab one edge, such as in steps cooking platform and other similar work complete all as specified and as directed.

S&F stainless steel sink made out of 1.0 mm thick stainless steel sheet for kitchen with plug , washers waste pipe , cast iron cantilever brackets overall size 510mmX430mm with bowl size 430mmX380mmX203 mm complete all as specified and as directed.

S&F 40 mm bore dia of dischage pipe waste coupling of PTMT (half or full threaded) . (Minimum weight 60 gms )complete all as specified and as directed.

S&F 75 mm diameter of outlet cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 using 20 mm graded stone aggregate complete all as specified and as directed.

S&F 40 mm bore flush pipe of polyethylene , 75cm long for WHB, sink etc complete all as specified and as directed.

S&F tubuler steel trusses including special shaped, heavy vertical post etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS- 1161-1979 grade St-240 complete all as specified and as directed.

M&L 100mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor /hard standing / path etc , surface finished even and rough to receive further treatment complete all as specified and as directed.

M&L 75mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor / hard standing / path etc , surface finished even and fair complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zink coating GI based corrugated steel sheets 0.50 mm thick of an colour having tensile strength of 550 MPs as in roof covering/cladding to walls , fixed with self tapping screws complete all as specified and directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium door shutters of side hung type with aluminium sections weighing 1.00 Kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, neoprene packing, screws,anodised aluminium fittings such as handles 2 Nos and 4 Nos hinges in each shutter, tower bolt 150mm long 2 Nos etc complete all as specified and as directed. Note :- Glass and paticle board shall be measured and paid seperately under respective item as considered therein

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window or ventilator shutters of sliding type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, screws, rollers, holding and with locking arrangements complete all as specified and as directed. Note :- Glass shall be measured and paid seperately under respective item as considered therein.

S&F 12 mm thick pre-laminated particle board, interior grade, pre-laminated both side with decorative choice lamination, ISI marked fixed to panels to aluminium/wooden joinery complete all as specified and as directed.

Supply only 5.5 mm thick sheet glass, ordinary quality in square exceeding 0.5 sqm in each pane fixed to aluminium or wooden joinery complete all as specified and as directed.

M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Dismantling existing water tanks of 500 litre capacity and removing from site complete all as specified and as directed,

S&F 1000 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet, overflow and wash out connections complete all as specified and as directed.

Cutting openings , through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc to store and rubbish not exceeding 50m distance complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on prepared external surfaces of walls of any description over 10 cm width or girth etc on column/ pillars, RCC chajja and facia complete all as specified and as directed.

M&L applying one coat of oil bound distemper including preperation of old decorated surfaces of ceiling complete all as specified and directed

M&L applying two coats of oil bound distemper over one coat of alkali resistant primer and including 1mm thick wall care putty on ceiling complete all as specified and directed

M&L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundations, footings, foundation beams; plinth beams; bases for columns, etc and mass concrete complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintel beam over 1.5m span and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

S&F Mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups,spaces and binder ,cut to length , bent to shape requred, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for 40mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in damp proof course mixed with WPC @ 3% by weight of cement on horizontal or vertical surfaces including necessary use and waste of formwork complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately under respective item.

S&F 150 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 15 mm bore dia stop valve ,fancy type , chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Use and waste of formwork to side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc, rough finished surfaces of concrete complete all as specified and as directed.

S&F 100 mm Mortice lock, mild steel , vertical type of 4 levers complete all as specified and as directed.

M&L applying one coat of oil bound distemper of approved shade including preperation of old decorated surfaces of wall complete all as specified and as directed.

M&L applying one coat of synthetic enamel paint of approved shade including preperation of old painted wooden surfaces complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light,fan,socket or power) complete along with fittings such as switches, sockets, ceiling rose , lamp holder, tube light fittings and making good distrubed surfaces of walls or ceiling etc to match with the existing complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with 1.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity drawn in including concealed PVC Conduit not less than 20 mm dia and necessary cutting and chasing as required including making good to match with the existing including pressed mild steel concealed box made out of 1.6 mm thick sheet duly covered with 3mm thick laminated sheet and other accessories required for mounting switches/sockets, accessories such as spacers, saddles, junction boxes for one light / fan point / bell point/5 amp socket controlled by one switch complete all as specified and as directed.

All as per item No 140 above but for one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

All as per item No 140 above but with 2.5 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 2.5 sqmm PVC FRLS insulated copper cable as earth continuity for power point on independent board complete all as specified and as directed.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S&F switch socket outlet 2 in 1, 3 pin 5 Amp, 230 volt, complete all as specified and as directed.

S&F switch socket combination , 3 pin 16 Amp, 230 volt, complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65mm x 30mm, three terminals over and including PVC box of size 3"x3" round type complete all as specified and as directed.

S&F 18 W tubelight fitting with lamp, Endura linear LED wall mounted LED batten with polycarbonate housing & intergated driver for efficient heat dissipation with complete fitting complete including necessary connection complet all as specified and as directed. Make:- Havells Cat part No LUMILINEBS 18WLED865SPCWH or Bajaj Cat part No. BCLSB 18 WH or equivalent of CG/ Philips.

S&F 9 W tubelight fitting with LED lamp of capacity 9 Watt , Endura linear LED Wall mounted LED batten with polycarbonate housing & intergated driver for efficient heat dissipation with including connection with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make:- Havells Cat part No: LUMILINEBS 9 W LED865SPCWH or Bajaj Cat part No: BCLSB 10 WH or equivalent in Philips

S&F exhaust fans 450mm sweep 1400rpm, heavy duty AC single phase 230 Volts including connection with multistranded copper conducter flexible wire of suitable size from ceiling rose to connector of fan, necessary fixing arrangement i.e. anchor nuts,bolts, washer including gruoting and making good to disturbed surface to match with the existing complete all as specified and as directed. Make:- Havells/ Khaitan/Almonard/Bajaj/ Cropmton Greaves

M & L for point wiring with 1.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS grade with one run of 1.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable as earth continuity conductor drawn through surface casing caping not less than 20mm wide ncluding pressed mild steel concealed box made out of 1.6 mm thick sheet duly covered with 3mm thick laminated sheet and other accessories required for mounting switches/sockets, accessories such as spacers, saddles, junction boxes for one light / fan point / bell point/5 amp socket controlled by one switch complete all as specified and as directed.

All as per item No. 148 above but with 2.5 sqmm copper cable of PVC insulated unsheathed multi stranded FRLS grade and one run of 2.5 sqmm copper conductor cable FRLS grade as earth continuity conductor for power socket out let 15/16Amp on independent board complete all as specified and as directed.

S&F Air Circulator, 450mm sweep 1400rpm, heavy duty AC single phase 230 Volts including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose to connector of fan, necessary fixing arrangement i.e. anchor nuts,bolts, washer including gruoting and making good to disturbed surface to match with the existing complete all as specified and as directed. Make:- Havells/ Khaitan/Almonard/Bajaj/ Cropmton Greaves

ABHIMANYU MAHARANA

RCB CONSTRUCTION

HARI PALAI