REPAIR TO CERTAIN BR AND EM WORKS IN HANGER AND REPAIR TO FENCING SECURITY WALL PATH AND DRAIN IN TECH AREA AT AF STN GORAKHPUR

Amount

Dismantling of false ceiling board, fiber insulation board any thickness including wooden cover fillets aluminium frame work complete all as specified and directed.

S&F anodised aluminium snap grid (size 605mm x 605mm) frame work for false ceiling including 4 mm dia GI hangar complete all as specified and directed.

M&L 4mm thick non asbestos fibre cement building boards fixed inserted in aluminium framework with screws as in ceiling complete all as specified and directed. Note: Aluminium frame work shall be measure and paid seperately)

Demolition of brick work built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L brick work in CM (1:6) with using sub class `B' old size bricks straight or curved on plan exceeding 6.0 mtr mean radius complete all as specified and as directed.

M&L brick work in CM (1:6) with using sub class `B' old size bricks straight or curved on plan exceeding 6.0 mtr mean radius, excepts bricks, complete all as specified and as directed.

Taking down cement plaster on brick wall and ceiling including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) plaster on fair faces of wall / concrete surfaces finish fair and even complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) plaster on fair faces wall / concrete surfaces finish even and smooth complete all as specified and directed.

M&Lpreparation of new plastered surfaces and applying three coat of white wash on wall complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two oil bound distemper over one coat of wall care putty on wall over cement primer complete all as specified and directed.

M&L including preparation of new plastered surfaces and applying two coat of cement base paint over one coat of cement wash with white cement on wall complete all as specified and directed.

M&L prepation of newly plastered surfaces of wall, pilasters, cornices etc and applying two coat of exterior emulsion paint in camouflage pattern (two or more colour combination) over one coat of primer complete complete all as specified and as directed.

M&L preparing old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applying one coat of exterior emulsion paint (Camouflage pattern) complete all as specified and as directed.

M&L for preparing old decorated plastered surfaces of walls, pillasters, cornices etc. and applying one coat of exterior emulsion paint complete all as specified and directed.

M&L preparing old decorated surfaces of wall with complete removal of existing treatment and applying two coats exterior emulsion paint in camouflage pattern complete all as specified and as directed.

M&L prepation of old plastered surfaces of wall, pilasters, cornices etc and applying two coat of cement base paint complete complete all as specified and as directed.

M&L for raking out cement mortar joints / pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs etc. complete all as specified and directed.

M&L for flush pointing in brickwork laid flat on roof surface etc with using cement mortar 1:3 complete all as specified and directed.

Dismantling existing transparent PVC sheets in roof complete all as specified and directed.

S&F 2.0mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixing in roof etc. complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed in roof etc with grade of zinc coating 275 complete all as specified and directed.

Taking down chowkats or frame with shutter without taking off shutter from the frames exc 1.50 Sqm but not exc 4.0 sqm each as in complete all as directed .

Taking down chowkats or frame with shutter without taking off shutter from the frames not exc 1.50 Sqm complete all as directed .

M&L for 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

M&L for flat iron 40 x 6mm as in clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C-1 as in filling in holes of hold fasts complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to chowkhats complete all as specified .

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F "Rajshri" or equivalent factory made 100% solid WPC (Wood polymer composite) door frame 100mm x 65mm single rebated made from WPC (single extruded process) material comprising of virgin PVC polymer of K value 57-60 (suspended grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent & screwed with full body treaded star headed screws having minimum frame density of 780Kg/cbm& manufactured by "Rajshri" an ISO 9001-2015 certified company. Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water /moisture proof & fire retardant & fixed in position complete all as specified and directed.

S&F 30mm thick "Rajshri" brand factory made moulded door shutter or equivalent factory made moulded door shutter- wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. MS frame shall have a coat of metal primer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/cynoacrylate adhesive with 5mm thick moulded PVC sheet of density 600Kg/Cbm manufactured by an ISO-9001-2015 certified company with 2,4,6 raised panel design in prelam colors after routing the Moulded designon one side of the inside panel. 5mm prelam sheet to be pasted using solvent on other side of the hollow section. All the 4 edges of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton. Including MS powder coated MS butt hinges for fixing of the same complete all as specified and directed.

S&F 200 mm long aluminum anodized barrel tower bolt of exturded section complete all as specified and directed.

S&F 150mm long aluminum handles cast type anodized fixed complete all as specified and directed.

S&F 100mm long butt hings medium weight cold rolled mild steel and fixed complete all as specified and directed.

M&L preparation of surfaces of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 19/20 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

S&F brass decorative knobs for cub boards fixed with screws complete all as specified and directed.

S&F magnetic ball catcher for self closure of shutters of cupboard fixed with screws complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap complete all as specified and directed.

S&F in repair 200 mm long aluminum anodized barrel tower bolt of exturded section complete all as specified and directed.

S&F in repair 150 mm long aluminum anodized barrel tower bolt of exturded section complete all as specified and directed.

S&F in repair 125mm long aluminum handles cast type anodized fixed complete all as specified and directed.

S&F in repair 150mm long aluminum handles cast type anodized Fixed complete all as specified and directed.

S&F 250 mm long aluminiunm sliding door bolt with hasp and staple bolt type and fixing clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

Supply and fixing in repair 25 mm dia stainless steel pipe as in curtain rod complete all as specified and directed.

Supply and fixed in repair for bracket for curtain rod complete all as specified and directed.

Repair / easing / readjusting of aluminium door/window shutters by taking down shutters from frame and dismentling members of shutters like, glass, rails and styles by necessary cutting, grinding of members etc and refixing of same including rubber gasket ,hinges , handle, screws etc complete all as specified and directed.

M&L anodised sliding type window with frame size 60X40X2.00 mm thick and shutter with section bearing bottom 52x18X1.50, top 39.4 x17.7 x1.5mm and sides 39.4 x 17.7 x 1.5mm (suitable for moving over two track over top of frame work, top and side section of size 61.6x31.75x1.5mm and bearing bottom track of size 61.6x31.75x1.5mm incl necessary aluminium jointing cleats,glazing cleats,rubber packing anodised aluminium snape beading, screws etc with 5mm thick tinted/plain glass in panels incl all fitting & fixture complete all as spesified and directed.

M&L anodised aluminium grill weight nexc 3.50 kg per sqm with all fittings& fixture, shape and size as approved complete all as spesified and directed .

M&L anodised aluminium doors with frame size 101.6 x 44.45 x 2 mm thick and shutter aluminium anodised and top rail 47.62 x 44.45 x 1.5 and style 47.50 x 44.50 x 1.50 mm, lock rail 83.5 x 44.45 x 1.50 mm and bottom rail150.00 x 44.50 x 2.50 mm incl necessary aluminium jointing cleats, glazing cleats, rubber packing anodised aluminium shape beading, screws etc. with panelling in two parts with 4 mm thick aluminum composite board in lower panel and 5mm thick tinted / plain glass in panels incl all fittings, MS 4 lever mortice lock, floor door spring and all fittings& fixture complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section body )designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg complete all as specified and directed.

S&F in repair Aluminum handle american type anodized size 250 mm long, complete all as specified and directed.

S&F in repair 5.5mm thick, sheet / tinted glass, ordinary quality to be fixed with aluminium beading and rubber gas kit in aluminium frame work as in door/ window/ partition etc all as specified and directed.

M&L for 4mm thick both side aluminium decorative sheet laminated partition panel for fixing in aluminium door shutters by taking out old ply/board from exsting aluminium door shutters complete all as specified and directed.

S&F in repair aluminum glazing clips / beading for aluminum door and window complete all as specified and directed.

S&F in repair rubber gasket for packing / beading for aluminum door and window complete all as specified and directed.

S&F in repair 250 mm long aluminium sliding door bolt with hasp and staple bolt type and extruded section complete all as specified and directed.

Demolition of PCC floor, plinth and paving not exceeding 15 cm thickness below or above ground level complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C1 as in plinth protection etc finished even and smooth without using extra complete all as specified and directed.

Dismantling of wall tiling and M&L for glazed ceramic coloured tiles 350x250x7mm/ 450x350x7 mm thick in wall as in dado / skirting laid with cement slurry over 10mm thick rendering CM in 1:4 complete all as specified and directed.

Dismantling of floor tiling and M&L for non skid Ceramic coloured tiles 7-8 mm thick (square or recatngular) area of each tiles exceeding 0.11 sqm and not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15 mm thick screed bed in 1:4 CM complete all as directed.

Dismantling of existing tiling and M&L for Light shade Vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over 15mm thick screed bed in 1:4 cement mortar complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite includeing dismantling of existing broken granite slab complete all as specified and directed.

M&L for 60mm thick factory made rubberised coloured (laminated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5mm) in white cement and non fadable glossy pigment of approved shade of any shape and size conforming to IS-15658-2006 of M-35 grade laid over & including cleaned dry sand cushion bed 30mm thick over as in sub-base, surface finished even and rough to a true surface etc complete all as specified and directed.

Taking up or down 15 mm bore water tubing and connection including cleaning for re-fixing or complete all as specified and directed.

Taking up or down 20 mm bore water tubing and connection including cleaning for re-fixing or complete all as specified and directed.

Supply & Laying of CPVC pipes of outer dia 20 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed.

Supply & Laying of CPVC pipes of outer dia 25mm, SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed.

S&F in repair PVC (SWR ) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius of 110mm bore sizes complete all as specified and directed.

Dismantling of water tank PVC of any pattern and S&F for 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and Fixed in position all as specificed in SSR part-I. Including supply and fixing of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and F ( Min Wt 15mm -142 Grams) complete all as specified and directed.

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F in repair for 15mm bore pillar taps cast copper alloy with capstan heads, chromium plated ,screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and flynuts screwed for iron pipes complete all as specified and directed..

S&F in repair for 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both end for iron pipes complete as directed complete all as specified and directed..

S&F in repair for 20 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both end for iron pipes complete all as specified and directed.

S&F in repair for 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes (Min Wt.-142 Grams) complete all as specified and directed.

S&F in repair for 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes ( Min Wt-210 Grams) complete all as directed.

S&F in repair vitreous china squatting pan 'Orrisa' pattern size 580mm x 440 mm white with integral foot rest and including trap (exuding flushing cistern and flush pipes) complete all as specified and directed.

S&F in repair vitreous china wash hand basin flat back sizes 550mmx400mm excluding taps, waste chain and plug and porcelain stopper but including bracket complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including plastic water closet seat cover closed pattern with flat bottom and cover and MS chromium plated aluminised hinging device including connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc. complete all as specified and directed.

S&F in repair Viterous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, bedding urinal against wall in cement mortor 1:2 complete all as specified and directed.

S&F in repair CP soap dish/tray fixed with wall complete all as specified and directed.

S&F PVC connections 15mm sizes with PTMT nut of length 600mmcomplete all as specified and directed.

S&F in repair PTMT gratting doom of 100mm dia size complete all as specified and directed.

S&F in repair PVC valveless syphonic action type low level flushing cistern and flush pipe for 10ltr capacity with inlet ball valve float and handle including bracket complete all as specified and directed.

S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and directed.

S&F in repair urinal including sensor of size 480 x 300 x 740 mm with all fixing accessories complete all as specified and directed. Make: Jaquar Cat No:URS-WHT-13255 or equivalent

S&F in repair 8mm thick Curved shaped urinal partition with frosted glass size 900mm x 450 mm complete all as specified and directed. Make: Jaquar Cat No: JSE-CHR-810UC450 or equivalent

S&F 32mm/40mm flexible stainless steel waste pipe complete all as specified and directed.

S&F in repair table top wash hand basin of size 470 x 470 x 110mm incl waste coupling and all fixing arrangements complete all as specified and directed. Make: Jaquar Cat No: FSS-WHT-29901 or equivalent

S&F in repair Rim less single piece WC (pesdestal pattern) with UF soft close slim seat cover, hinges dual flush cistern fitting incl fixing accessories set size 385 x 720 x 710mm with S Trap 300 mm size complete all as specified and directed. Make: Jaquar Cat No: ONS-WHT-10853S300UFSM or equivalent

S&F in repair toilet paper holder with stainless steel flab complete all as specified and directed. Make: Jaquar Cat No: CAN-1153S or equivalent

S&F in repair soap dispenser with glass bottle complete all as specified and directed. Make: Jaquar Cat No: AKP-35735P or equivalent

S&F in repair stainless steel towel rail 600mm long complete all as specified and directed. Make: Jaquar Cat No: AKP 35711PS or equivalent

S&F in repair swivel mirror 630 x 445mm rectanguar shape complete all as specified and directed. Make: Jaquar Cat No: AKP 35795 or equivalent

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and directed. Make: Jaquar, Cat No. ALD-565 or equivalent

S&F in repair Angular Stop Cock with Wall Flange complete all as specified and directed. Make: Jaquar, Cat No: FUS-29053 or equivalent

S&F in repair Pillar Cock with Extension Body complete all as specified and directed. Make: Jaquar, Cat No: FUS-29021N or equivalent

S&F in repair Bib Cock with Wall Flange complete all as specified and directed. Make: Jaquar, Cat No: FUS-29037 or equivalent

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embeded in cement concrete.

Taking down chain link fencing fixed to any type of standard rails, straining bolts etc complete all as specified and directed.

Dismantling of concertina coil 600mm dia any shape including razor wire of six linc etc all as specified and directed.

Dismantling Galvanized, 2 strand, steel barbed wire of any description complete all as specified and directed.

M&L PCC 1:3:6 type C2 40mm graded stone aggregate as in fixing of fencing post and mass concrete all as specified and directed.

S&F mild steel work as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets incl all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type of minimum dia 3.15 mm or above complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc. complete all as specified and directed.

M&L for mild steel round bar 10 to 12mm dia confirming Fe-410-W (Gde.E-250) Fe 290 (Gde - E-165) as in stiffeners to chain link fencing etc. complete all as specified and directed.

M&L Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in repairs to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line of wire to be measured).

M&L preparation of new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete.

S&F 610mm dia punched tape concertina coil (effective dia 550mm at strech length of coil 6m) with two handle and spikes at both end of coil with dovetail clips [18 SWG], incl razor wire [7 No], 6m length of each wire medium size, barbed length 20mm width 14mm, incl 51 pins, 128 nos of clips in each coil incl 230gm/ Sqm Zinc coating on core wire complete all as specified.

Fixing only existing serveciable concertina coil and razor blade complete all as specified and diected

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F rolled mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specififed and directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts exc one brick but not exc two brick.

M&L plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and directed.

S&F in repair chequered cement concrete tiles (20cm x 20cm x 25mm or 30cm x 30cm x 25mm) thick with gray cement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M&L sand filling under floors or in foundation including watering and well ramming with consolidation of thickness as specified and directed.

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for point wiring for one light / fan point controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and top cover and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed. Note: (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

All as per item No. 125 above but for one 5 Amps socket point controlled by one 5 Amps switch on same board.

All as per item No. 125 above but for one 5 Amps socket point controlled by one 5 Amps switch on independent board.

All as per item No. 125 above but for one bell point controlled by one 5 Amps bell push.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with top cover including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note: (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

M&L for point wiring for one light/fan point controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including PVC casing caping all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with top cover and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed. Note: (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

All as per item No. 130 above but for one 5 Amps socket point controlled by one 5 Amps switch on same board.

All as per item No. 130 above but for one 5 Amps socket point controlled by one 5 Amps switch on independent board.

All as per item No. 130 above but for one bell point controlled by one 5 Amps bell push.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including PVC casing caping with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken modular type pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with top cover including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

S&F switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

S&F socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

S&F socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

S&F bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

S&F call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Taking down old unserviceable light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.

S&F 10 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. LHEXACP5IN1W010 or equivalent of approved make

S&F 20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. LHEXBLP7PN1W020 or equivalent of approved make

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED street light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:- Havells Cat No.ENDCITYLITPLAT+SL35WLED757 SASY BOPCWOSPD or equivalent of approved make

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 70 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:- Havells Cat No. JETAALBA FLOODLIGHT70W or equivalent of approved make

S&F 9/10 watt LED 6000K bulk head light fitting complete all as specified and as directed. Make:- Havells Cat part No. RUGBYGENXFTS10WLED865 SSYMBOPC or equivalent of approved make

S&F in replacement 5 W striker LED ceiling surface mounted light, suitable for installation in 5.08 cm (2) deep junction box, slim Junction box, cabinets and surface applications complete all as specified and directed. CAT Part No: LHEAATP7IL1W005 or equivalent.

Supply only 10 W rechargeable LED light with side light with long range and high brightness. CAT No LHEXTDPGEN1K010 or equivalent

S&F in replacement brackets made out of 40/50mm dia medium grade GI pipe 1.50 mtr long bent to shape and size fixed on location using new 2 nos 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed.

Supply and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connections of 6 Sqmm size twin core flat solid conductor cable complete from pole to distribution board main controlling switch complete all as specified and as directed.

Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolators, complete all as specified and as directed. Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.

S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F sheet metal enclosure distribution board SPN 2 ways complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F MCCB, 4 pole, 63 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 100 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 125 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SP, 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TP, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F exhaust fan (air freshener) single phase 230/240 volt AC 250mm sweep with louvers, plastic body and making connection with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.

S&F exhaust fan (air freshener) single phase 230/240 volt AC 300mm sweep with louvers, plastic body and making connection with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.

S&F exhaust fan single phase 230/240 volt AC 450mm sweep, with painted louvers, metal body and making connection with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.

Supply only in replacement switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

Supply only in replacement socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

Supply only in replacement switch socket combination multipurpose 5 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

Supply only in replacement switch socket combination multipurpose 3/5 pin, 5/6 amps flush type complete all as specified and directed.

Supply only in replacement bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

Supply only in replacement fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

Supply only in replacement lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply only in replacement Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Supply only in replacement LED tube rod 18/20 watt (4ft), 240 volts complete all as specified and directed.

Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc all as directed.

M&L for concealed sub main wiring using two single core PVC insulated, unseathed stranded copper conductor cable of size 2.50 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 2.50 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)

M&L for concealed sub main wiring using two single core PVC insulated, unseathed stranded copper conductor cable of size 4.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)

Supply only PVC Casing caping of size 25mmx16mm complete all as specified and directed

Supply only modular type PVC enclosure with a two pin and earth plug and socket 16 Amps complete with one single pole MCB 20/25 Amps capacity complete all as specified and directed.

Supply only SS Screws of dia 6mm with long plug shaft for fixing of casing caping complete all as specified and directed

Supply only fastener bolts for fixing of geysers complete all as specified and directed

Supply only in replacment single core 1.5sqmm copper cable Heat Resistant Flame Retardant (HRFR) PVC Insulated Industrial flexible cable 1100 volts complete all as specifeid and directed.

Supply only in replacment single core 2.5sqmm copper cable Heat Resistant Flame Retardant (HRFR) PVC Insulated Industrial flexible cable 1100 volts complete all as specifeid and directed.

Supply only in replacement 3 core PVC insulated and FR PVC Round Sheathed, Copper Conductor 2.50sqmm each core, 1100 volts grade complete all as specified and directed.

Supply only in replacment motor, single phase for 200/250mm Exhaust fan as per sample complete all as specified and directed.

Supply only in replacement Switch Socket combination unit with box having 20A Switch, 6A/16A Socket, 240 volts complete all as specified and directed.

M/s Durgesh Kumar Mishra

M/S GUPTA TRADERS

M/S APARNA ASSOCIATES

GANGA TRADERS

M/S ARORA CONSTRUCTION

HIMANSHU TRADERS

Sheo Prasad

A K CONSTRUCTIONS