Setting up of Creche at Ground Floor E Wing at NATIONAL FERTILIZERS LIMITED Corporate Office Noida

CIVIL WORK - Annexure - I

DISMANTLING WORK

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

15.56 Dismantling old plaster or skirting raking out joints

15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

4.1.5 Providing and laying plain cement concrete in foundation and plinth. 1:3:6 Grade cement concrete(20mm aggregate)

8.2.1.2 P/F 18mm thick gang saw cut mirror polished premoulded & prepolished machine cut ...Udaipur green marble, granite black …etc complete at all levels. Udaipur green marble area of slab over 0.50 sqm

8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

9.1.3 Providing wood work in frames of doors, windows, clerestory windows ,and other frames,chemically treated Marndi/hollock wood.

9.17.1 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked,to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): Particle board 12 mm

9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face vene 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

9.62.2 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

9.63.2 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200 mm x 10 mm

9.66.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm

9.66.2 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm

9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete

9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, Single rubber stopper

11.38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

13.9 Distempering with oil bound washable distemper Old work (One or more coat)

13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

13.80 Providing and applying white cement based putty of average thickness 1 mm

13.99.1 Painting with synthetic enamel paint of approved brand and manufacture On old work

21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket 5 mm thick

17.10.2.2 Providing and fixing Stainless Steel Kitchen Sink

17.13.1 Providing and fixing white vitreous china water closet squatting pan (Indian type) :

17.2.1 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan)

17.23 Providing & fixing of Urinal

17.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe(40mm dia)

17.32.4 Providing and fixing mirror of superior glass (of approved quality) and Rectangular shape 1500x450 mm

17.34.1 Providing and fixing toilet paper holder :

17.71 Providing and fixing PTMT liquid soap container

17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm

18.21.2.1 PVC connection pipe

18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931….15mm NB to IS:8931

18.51 Providing and fixing C.P. brass long body bib cock

18.53.1 Providing and fixing C.P. brass angle valve of approved quality and brand 15mm NB

18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes

15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge.

8.3.1 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work

Total of Annexure-01

CIVIL WORK - Annexure - II

Repair of Gypsum board false ceiling - Renewing of Gypsum board i/c removal of defective Gypsum board and its disposal outside office complex, applying joint tape at joints and levelling i/c a coat of primer and ceiling section i.e. frame work as per site requirement complete.

Providing and Fixing of Aluminium Window Handles on existing window (Left & Right Hand)

Providing and fixing the following items of approved make/ specific brand i/c screws and nails - Drawer lock with two keys for table and side racks

Providing and Fixing of Drawer Handles of size 750mm with screw and complete in all respect.

Providing and Fixing of Drawer Rounded Knob and fit to drawer complete in all respect.

Providing and Fixing of Drawer Hinges of size 750mm X 100mm with all necessary work like fitting etc and fit to close the drawer.

Dismantling of Urinal, washbasin, WC with cistern including fittings

Providing & fixing Polyvinyl Chloride (PVC) pipes having thermal stability for cold water supply,including all PVC plain & brass threaded elbows, sockets, tees and other fittings including fixing the pipe with Clamps at 1.00 meter spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joint complete as per direction of Engineer in Charge (Size 2")

Providing and Fixing 2 Way Angle Valves

Providing and Fixing 2 Way Bib Cock

Providing and fixing CP brass pillar cock of 15 mm nominal bore.

Providing & fixing of commercial ply/ veener on existing frame after dismantling of existing ply and make it fit/ match with existing ply with good finish complete. 6 mm commerical Ply

Providing and Fixing of Floor trap Steel Jalli 100mm

Providing and fixing frosted / striped / designer glass film of Garware or equivalent, Any colour or equivalent on existing glass as per manufacturer’s specification. All as per drawing, approval and instructions of the Engineer-in-charge.

CPVC Gate Valve 25mm

Providing and fixing C.P.washing jet for Europeon W.C.complete with nuts, bolts, PVC connection pipe and making all necessary connections with water supply line including filltings like G.I.Tee, Sockets etc (Health Faucet)

BOARD PARTITION & PANELLING WORK

Renewing glass panes- providing & fixing of rubber in existing aluminimum/rubber/ existing window frame (Float Glass panes of thickness 5.00 mm)

Providing and fixing in position full height solid partition shall be made out of including 38mm thick door shutter with steam beech wood chowkhat of size 85mm x 65mm approx. made out of aluminum C section of 50mm x 35mm x 35mm size 1.5-2mm thick as internal frame structure placed horizontally & vertically in 600mm x 600mm center to center. Fixing 12mm thick MDF Ply Board on both sides finished as mentioned below in approved shade with groove pattern as per architect instructions. Item inculdes 50mm thick medium density glass wool insulation in partition. Both sides of partition finished with 1.0mm thick laminate of approved shade as per instructions of Engineer -in- charge.

Rubber Flooring - Interlocking Play Mat type 12-15 mm Thick. Floor mat for kids play area

Total of Annexure-02

ELECTRICAL WORK - Annexure - III

1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C (Primary point )

1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C (looping point )

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C (Primary point )

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 2.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C (looping point )

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

1.5 mm2 insulated Copper wire 1100V

2.5 mm2 Copper wire 1100V multistrand

415V,+/-10%, 50 Hz, 3 Phase, 3- Pole MCB ,10kA, rating 32A,

Exhaust fan for Pantry

Exhaust fan for washrooms

Wall mounted Fans

Batten LED Tubelight: 4 feet long Power: 25W

LED Tubelight: 4 feet long round in shape,,Cool Day Light, 6500K , T-8, two pin, G-13, 20W LED (Retro)

Flat round surface panel recessed /downlighter LED Light with OR without (in built) driver .Wattage : 9W, cutout size 100mm

Flat round surface panel recessed /downlighter LED Light with OR without (in built) driver .Wattage : 8W, cutout size 100mm

Total of Annexure-03

KRISHAN YADAV (BID ID -901506)