REPAIRS TO STORM WATER DRAIN/CULVERT/ HARDSTANDING/ FOOT PATH/BOUNDARY/SECURITY WALLS/ FENCING/ BARBED WIRE/CONCERTINA COIL AT ORC/ BOLTON ROAD AND CAW AREA UNDER GE (AF) HAKIMPET.

Amount

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M& L for Providing precast cement concrete 1:2:4 type B- 1 mix using 20 mm graded stone aggregate as in landings, cover slabs (for Drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar complete with joints to match with Type B1 1:2:4 (20mm graded aggregate) complete all as specified and as directed.

M&L for TMT steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Demolition of brick or stone / boulder built in cement mortar of any description complete all as specified and as directed.

M & L for Plain Cement Concrete 1:4:8 Type D-2 mix (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry with solid blocks, Type C-1 mix PCC 1:3:6 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed.

M&L for Brick work with old size with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and as directed.

Material & labour walling of random rubble masonry uncoursed, Secunderabad type well bonded, bedded and solidly hearted built in cement mortar 1:6 etc complete all as specified and as directed.

Description all as per Ser item No 08 above but except stones (serviceable stone obtained from dismantling shall be made use of under this item).complete all as specified and as directed.

M&L for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all moldings set in CM 1:4 (Type B-0 1:2:4 using 12.5 mm graded stone aggregate) as in repairs complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position and disposed off to a distance exc. 50 mtrs and not exc. 250 mtrs complete all as specified and as directed.

Material and labour PCC 1:3:6 type C-1 mix (using 20 mm graded stone aggregate) as in copings etc complete all as specified and as directed..

Material and labour for PCC 1:3:6 type C- 2 mix (using 40 mm graded stone aggregate) as in surface channel / drains etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:4, and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Preparation of new plaster surfaces of walls and applying two coats of cement based paint complete all as specified and as directed.

Dismantling of floor tile, herth / wall tiling and tiles of any description or any thickness including cement mortar bedding and rubbish off the premises complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, type D-2 mix (using 40 mm graded stone aggregate) for sub base of floors etc complete all as specified and as directed.

M&L for sand filling under floors for interlocking tiles including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver blocks with grey cement and pigment of interlocking paver blocks any shape and size confirming to IS-15658- 2006 of 60 mm thickness M - 35 grade with gray cement complete all as specified and as directed.

M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finishes etc complete all as specified and as directed.

M&L for Colour Chequired cement concrete tiles 20 cm x 20 cm x 25 mm thick with grey pigment cement and pigmenst set ionted and pointed in neat cement slurry colour to match in floors complete all as specified and as directed.

M & L for 75 mm thick Cement concrete 1:2:4 type B-1, mix (using 20 mm graded stone aggregate) as in sub base of flooring / hard standing and finishing the surface even and smooth complete all as specified and as directed.

M&L for Forming construction (dummy) joints 65 mm x10 mm wide filled with sealing compound grade A complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C-2 mix (using 40 mm graded stone aggregate) for plinth protection and finished even and smooth without using extra cement complete all as specified and as directed

Fixing Only in repairs Stone kerb of roughly squared stones of size 15 cm x 30 cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush Granite or trap stone including taking down of old stone complete all as specified and as directed.

Dismandling of RCC fencing post in any section including taking out embedded portion.complete all as specified and as directed.

M & L for Plain Cement Concrete 1:3:6 Type C-2 mix (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed..

M&L for Mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and as directed.

M&L for MS screw bolts (machine made) 5 mm to 10 mm dia with hexangonal or squre head at one end screwd other or screwd end fitted with wishers and one hexogonal or square nut exc 5 cm long complete all as specified and as directed.

Supply Only chain link MS galvanised fencing any size or type not .exc 4 kg / sqm complete all as specified and as directed.

Fixing Only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S & F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 100 mm spacing complete all as specified and as directed.

Fixing Only in repairs Restraining and resecuring including making good staples etc Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 100 mm spacing complete all as specified and as directed.

S&F in repairs Concertina coils super barbed bladed profile of dia 600 mm of and wt of coil for 50 spiral turns shall not be less than 9.0 kg and one coil (50 spiral) shall not be stretched to more than 6.0 mt. blade shall be 0.50mm th galvanised steel strip and 2.5mm dia core wire fixed to angle iron brackets or masonry surfaces with necessary accessories like straining wires, fixing clips etc complete all as specified and as directed.

Fixing Only in repairs of existing concertina coil fixed to angle iron brackets or masonry surfaces with necessary accessories like straining wires, fixing clips etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S & F Mild steel work as in hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F angle / flate iron/chanel framed work such as iron gate, ladder, SWT frame, grills, gratings,framed guard bars, etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confiRming to Fe 290 Gde E-165 complete all as specified and as directed.

M&L for Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Fixing Only Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confiRming to Fe 290 Gde E-165 complete all as specified and as directed.

M&L for preparation of old surfaces of any description, not otherwise described, over 10 cm width or girth applying one coats of synthetic enamel paint complete all as specified and as directed

M/S DIVIJA BUILDERS

RAJU AND COMPANY