Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.3 Cr
EMD Value
₹6.7 L
Closing Date
6 Sept 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mangalore Electricity Supply Company Limited
Yashavantha n p
Construction of MESCOM division office at Karkala, Udupi District.
MESCOM/2025-26/BD/WORK_INDENT332
MESCOM/2025-26/BD/WORK_INDENT332
Open
Buildings
Two Tender Document System(Two Cover)
MESCOM Superintending Engineer Tech Corporate Office Managaluru
7 documents required · 6 mandatory · 1 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Work Done Certificate:- Satisfactory completion as a prime contractor for at least one single building work to an extent of 50% of the cost of the work i.e., Rs. 265.00 Lakhs in any one year out of last 5 years. Certificate should be issued by Executive Engineer, equalant or above cadre. Work done certificate without indent number will be rejected.( from last 5 years from date of closure of tender)
Turnover certificate of last five financial year (2019-2024) with UDIN number
Must executed in any one year, the following minimum quantities of work: Cement concrete (including RCC and PSC) 641.00 cum, Providing and Fixing Mechanical type Storage Mobiliser of volume 65.00 cum, TMT Steel 66.00 tons, All Masonry 436.00 Cum ( from last 5 years from date of closure of tender)
Financial turnover The Financial turnover of bidder in any two years out of last 5 year shall not be less then Rs. 530.00 Lakhs The Tenderer should enclose last Five years balance sheet copy issued by Charted Accountant and IT returns copy
liquid assets and /or availability of credit facilities of not less than Rs. 132.50 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period) (25% of estimated amount)
Contractor having Valid License Class 1 and above
GST Registration document
Valid ESI certificate
Valid EPF Certificate
Valid Labour License Certificate
₹5,000
₹6.7 L
6 Aug 2025
6 Aug 2025
10 Sept 2025
30 Aug 2025
26 Aug 2025
Construction of MESCOM division office at Karkala, Udupi District.
Levelling Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, trutting, barricading, caution lig...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Ground Floor:- Plinth Beam
Ground Floor:- Column below Ground level
Ground Floor:- Retaining wall
Ground Floor:- Lift wall
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Ground Floor:- Lintel
Ground Floor:- Chejja
Ground Floor:- Roof Beam
Ground Floor:- Roof Slab
Ground Floor:- Staircase
First Floor:- Column,
First Floor:- Lintel,
First Floor:- Slab
First Floor:- Staircase,Shade
First Floor:- Chejja
Terrace Floor:- Column
Terrace Floor:- Slab
First Floor:- Beam
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete.
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of e...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal wa...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickn...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off cor...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever...
Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing comple...
Providing 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand): Moulded Band including rounding off corners wherever required smooth rendering, providing and removi...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 ltr/10 m² over and including one coat...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 ltr/10 m² over and including one coat...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two coats on new work over an under coat of suitable shade with ordinary paint of approv...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease,
Melamine polishing on wood work (one coat) including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per ...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed, including cos...
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (0.05 Percentage) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 mi...
Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Fabricating, providing and erecting in poiston of M.S. Ornamental security Grill Gate without hot dip using 75 x 12mm M S Flat for alround frame work with verticals at the centre and horizontal center...
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever...
Providing and fixing curtains of cotton fabric or equivalent of required specification as suggested by site engineer in charge including cost of material, transportation, labour etc complete as per sp...
Lawn planting in hard soil: Digging pit 0.30.Back filling 50 Percentage by the topsoil and remaining 50Percentage is filled using the Redsoil in 1:2:3 ratio.
KSRRB M400- Wet Mix Macadam KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the ma...
Providing full nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specific...
Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specific...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Installing, testing and commissioning of approved make 15 mm CP health faucet with CP flexible tube 1.0m long, CP crutch, nozzle etc.,complete.
Providing and fixing brass stop cock of approved quality : 20 mm nominal bore
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
Providing and placing on terrece polythene water storage tank , IS : 12701 marked with cover and suitable locking arragements and making necessary holes for inlet, outlet and over flow pipes but witho...
Providing and fixing 100 mm sand cast Iron grating for gully trap/ Nahani trap
Providing and fixing to wall ceiling and floor unplasticised PVC pipes 6.00kgs/sq.cm working pressure with pipe fittings,wallclips making good the wall ceiling and floor including cost of all materia...
1) Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plas...
2) Constructing brick masonry chamber of internal dimension 450x300mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plas...
Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings incl...
Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings incl...
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore Vertical
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with ...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Point wiring using copper wire without switch : Supplying and wiring adopting loop system in existing PVC Conduit / casing caping using copper PVC insulated multi strand 2x1.5Sqmm copper wire with ...
Medium point above 3Mtr upto 6mtr from tapping point to outlet via switch(Refer KPWD SR 2022/23 Page 3 Sl.No. 2.2.2)
Long point above 6 mtr upto 10mtr from tapping point to out let via switch (Refer KPWD SR 2022/23 Page 3 Sl. No. 2.2.3)
Two outlet in a row, above 3mtr upto 6mtr from tapping point to out let via switches (Refer KPWD SR 2022/23 Page 3 Sl. No. 2.2.4)
Three outlet in a row, above 6mtr upto 10mtr from tapping point to out let via switches (Refer KPWD SR 2022/23 Page 3 Sl. No. 2.2.5)
Concelled Conduit System : Supplying heavy gauge PVC conduit pipe ...... mmdia..........mm thick confirming to IS 2509 with suitable sizebends, metal/PVC Junction boxes, adhesive paste etc., and runn...
25mm dia 2mm thick (Refer KPWD SR 2022/23 Page 1 Sl. No. 1.2.2)
32mm dia 2mm thick (Refer KPWD SR 2022/23 Page 1 Sl. No. 1.2.3)
Groove cutting : Supplying...dia 2mm/2.5mm thick heavy gauge PVC Conduit pope with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface of...
25mm dia 2m thick (Refer KPWD SR 2022/23 Page 1 Sl. No. 1.3.2)
32mm dia 2.5mm thick (Refer KPWD SR 2022/23 Page 1 Sl. No. 1.3.3)
Wiring for lighting/ power circuit using one of PVC insulated 1100v grade, multis and Copper conductor single core cable in open or concealed system of wiring.1.5 sqmm (Refer KPWD SR 2022/23 Page 3 ...
2.5 sqmm (Refer KPWD SR 2022/23 Page 3 Sl. No. 2.3.3)
4 sqmm (Refer KPWD SR 2022/23 Page 3 Sl. No. 2.3.4)
6 sqmm (Refer KPWD SR 2022/23 Page 3 Sl. No. 2.3.5)
10 sqmm (Refer KPWD SR 2022/23 Page 3 Sl. No. 2.3.6)
SUPPLYING AND FIXING PVC / METAL CONDUIT ACCESSORIES.
Deep Junction Box 19/20mm deep junction box
25mm deep junction box (Refer KPWD SR 2022/23 Page 1 Sl. No. 1.5.2)
Fan Box / Hook Supplying and fixing of Metal Fan Box with Round Hook.
Extra length of GI pipe of class B 19mm dia for down rod. Refer KPWD SR 2022/23 Page 46 Sl. No. 13.12)
Supplying and flush mounting powder coated/galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. wall
4 - 5 Way(Refer KPWD SR 2022/23 Page 5 Sl. No.3.4.2)
6 Way (Refer KPWD SR 2022/23 Page 5 Sl. No.3.4.3)
8 Way (Refer KPWD SR 2022/23 Page 5 Sl. No.3.4.4)
10-12 Way (Refer KPWD SR 2022/23 Page 5 Sl. No.3.4.5)
16-18Way(Refer KPWD SR 2022/23 Page 5 Sl. No.3.4.6)
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
4 Module (Refer KPWD SR 2022/23 Page 5 Sl. No.3.5.2)
6 Module ( Refer KPWD SR 2022/23 Page 5 Sl. No.3.5.3
8 Module (Refer KPWD SR 2022/23 Page 5 Sl. No.3.5.4)
10-12 Module (Refer KPWD SR 2022/23 Page 5 Sl. No.3.5.5)
16-18 Module (Refer KPWD SR 2022/23 Page 5 Sl. No.3.5.6)
Supplying and fixing of Modular Switch/Socket/Stepped type electronic fan regulator/dimmer/telephone socket etc on existing modular Switch Plate. IS 3854 & IS 1293.
6A one way (Refer KPWD SR 2022/23 P...
6A two way (Refer KPWD SR 2022/23 Page 5 Sl. No.3.6.2)
6A three way socket.(Refer KPWD SR 2022/23 Page 5 Sl. No.3.6.3)
Stepped Fan Regulator.(Refer KPWD SR 2022/23 Page 5 Sl. No.3.6.4)
16A one way switch.(Refer KPWD SR 2022/23 Page 5 Sl. No.3.6.8)
6A Bell Push.(Refer KPWD SR 2022/23 Page 5 Sl. No.3.6.9)
32A DP switch.(Refer KPWD SR 2022/23 Page 5 Sl. No.3.6.10)
6/16A Universal Socket.(Refer KPWD SR 2022/23 Page 5 Sl. No.3.6.11)
TV/Telephone Socket. (Refer KPWD SR 2022/23 Page 5 Sl. No.3.6.12)
RJ 45/I.O Out let Cat 6(Refer KPWD SR 2022/23 Page 5 Sl. No.3.6.13)
6A Bell Buzzer(Refer KPWD SR 2022/23 Page 5 Sl. No.3.14.8)
Ding Dong Bell(Refer KPWD SR 2022/23 Page 39 Sl. No.12.2.1)
Supplying and fixing miniature circuit breaker on existing MCB distribution board using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capaci...
6-32 A TPN(Refer KPWD SR 2022/23 Page 13 Sl. No. 5.17.7)
32-40A 4 pole RCCB,100ma (Refer KPWD SR 2022/23 Page 13 Sl. No. 5.19.8)
16-25A,2P,RCCB,100MA (Refer KPWD SR 2022/23 Page 13 Sl. No. 5.19.1)
Supplying and fixing regular MCB distribution board on wall/flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCBs single phase/3 phase/single d...
12 way SP &N(Refer KPWD SR 2022/23 Page 13 Sl. No. 5.18.9)-ELDB/UDB
Supplying and drawing PVC flexible TWO pair telephone unarmoured tinned copper cable. -2 Pair. (Refer KPWD SR 2022/23 Page 27 Sl. No. 8.2.2)
Supplying and drawing UTP-CAT 6E LAN Cable (Refer KPWD SR 2022/23 Page 27 Sl. No. 8.1)
Supply and Fixing of MDF Krone junction boxes with KRONE module/telephone cable termination 10 pair (Refer KPWD SR 2022/23 Page 28 Sl. No. 8.13.1)
Supplying….mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/ PVC junction boxes adhesive paste etc : ...
Supplying….mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/ PVC junction boxes adhesive paste etc : ...
Fixing all types and all capacities of flouroscent / false ceiling / spot light / CFL / LED fittings on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, requir...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps ceiling rose, necessary...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and coloring to match the existing wall or brackets with bolts and nuts and a 5 amps, ceiling rose wi...
Fixing all types and Fixing halegen/LED/MH/svl/il/led FLOOD LIGHT FITTING on existing Pole /wall ceiling including lamps ,blts,nuts and wiring usiing suitable capacity wires (Refer KPWD SR 2022/23 Pag...
Chemical Earthing for grounding, conduits, IC cutouts and other equipments on the Meter Board by using Copper bonded / SS Rod with earth enhancing backfill compound which is non corrosive, thermally c...
Supplying and running of GI/copper strips for grounding connections using necessary fixing materials as required.
25 x6 mm GI strip (Refer KPWD SR 2019/20 Page 40 Sl. No. 6.3.2)
8 SWG copper wire (Refer KPWD SR 2019/20 Page 44 Sl. No. 6.18.6)
Supplying 1.1KV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised, steel strips :
70 Sqmm, 3.5 Core, (18 GI Strips - 4 x 0.8 mm (Refer ESCOM SR PART III, ...
Labour charges for laying of 1.1 KV class UG cable existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench / duct
35 to 95 Sqmm (Refer ESCOM SR PART 1V - 2021/22...
Supply and fixing of heavy duty cable glands suitable for UG Cables of 1.1 KV Class. (metal only) 45 mm (Refer ESCOM PART III, SR 2021/22 Page 25 Sl. 528 Item No.64.05)
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.
70 Sqmm (Refer ESCOM PART III, SR 2021/22 Page 21 Sl. 529 Item No.64.06)
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth
upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...
Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...
Supply and Installation of 40 mm dia 2.5mm thick PVC Pipe as per IS-2509 (Refer KPWD SR 2022/23 Page 1 Sl. No. 1.1.4)
Supply and installation of spike type copper lightening Air Termination with standard copper support rod of 25mm dia fixed to the top most height of the building. The rate shall include the cost of cl...
Supply and fixing of test link for the lightening conductor on the wall at 600mm above the finished ground level with sheet steel enclosure.
25 x6 mm GI strip(Refer KPWD SR 2019/20 Page 40 Sl. No. 6.3.2)
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Ccurve,indicator ON/OFF,energy cross 3 with short c...
6-32 Amps DP FOR OUT GOING(Refer KPWD SR 2022/23 Page 13 Sl. No. 5.17.4)
50-63 A TPN FOR OUT GOING(Refer KPWD SR 2022/23 Page 13 Sl. No. 5.17.9)
Supplying 100.Amps rated 3 phase with neutral bus bar using requirement capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/ DMC insulator ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. andM.S.flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50x5...
Fabricating supplying and mounting MS box made out 14 SWG suitable for floor/ wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter (Refer KPWD SR 2022/23 Page 14 Sl. No. 5.35)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C.50 Hz 12/24v D.C..(Refer KPWD SR 2022/23 Page 14 Sl. No.5.38)
Supplying and fixing HRC Fuse unit base on existing switch/panel board - Up to 63A (Refer KPWD SR 2022/23 Page 11 Sl. No. 5.10.1)
Supply and fixing of fully Enclosed Automatic Transfer Switch (ATS) Pre-wired with Flexible Settings and seamless transfer between two power sources. The enclosure made of MS Power coated of necessary...
Supplying and fixing of and wiring earth leakage relay with core balanced Current Transformer suitable for single phase 50Hz AC with latest microcontroller based ,digital readout (Refer KPWD SR 2022/...
Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter. (Refer KPWD SR 2022/23 Page 14 Sl. No.5.29)
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden
Current Transformer Class 0.5 accuracy with Tape Wound.(Refer KPWD SR 2022/23 Page 14 Sl. No.5.34)
Supply and Installation of Surge Protection Device (SPD) with 63A 4P Isolator.Market Late (OBO/DEN Make)
Supplying ---- feet --- PVC batten with integrated LED tube ---- watt with high quality deffuser with life of 25000 burning hours &70 percent lumen maintenence with CRI.2 year warranty againest any m...
LED light fitting 1 x2 - 9/10watt -(Refer KPWD SR 2022/23 Page 34 Sl. No.11.3.1)
Supplying 48 inch Sweep (1200mm)capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, Single phase AC supply conforming ot ISS-374-19...
Supplying exhaust fan of 1440 RPM of 450mm (12inch) size with bracket blades complete for heavy duty suitable for operate on 230V 50Hz, AC supply.(Refer KPWD SR 2022/23 Page 22 Sl. No.6.2.1)
LED square or round down light 15-18 watt(Refer KPWD SR 2022/23 Page 34 Sl. No.11.5.3)
LED Modular down light 2x2/1x4 -34-36watt(Refer KPWD SR 2022/23 Page 35 Sl.No.11.6.2)
Supply of LED Streetlight 70 watts.(Refer KPWD SR 2022/23 Page 36 Sl. No. 11.8.3)
6A Bakelite Ceiling Rose (Refer KPWD SR-2023-24 Vol-6 part-3 Page 10 Sl. No. 3.14.5)
PROJECTOR with screen: Providing and Supplying and fixing Projector along with Projector screen of required specification as suggested by site engineer in charge including cost of material, transp...
Supplying of TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410A ...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. (Refer K...
Supplying and installation of insulated refrigerant copper tubing of 5/8 and 3/8 with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas c...
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle/L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.(Refer KPWD SR 2022/23 Page 25 Sl. No.6.22
Providing and Supplying Cushion chair with arm or equivalent of required specification as suggested by site engineer in charge including cost of material, transportation, labour etc complete as per sp...
Providing and Supplying Executive table of size 7.5X1.5X2.5 without drawers and doors or equivalent of required specification as suggested by site engineer in charge including cost of material, trans...
Design,manufacturing ,Supply &Installation of Mechanical type Mobile Storage system (Optimizers)as per approved drawings. Base frame of 3.15 mm thick C channel HR sheet (30x100x30mm) cabinet of 22swg(...
5 Bay Single Faced Static unit Size H 2502 X W 3660 X D 381 mm
5 Bay Double Faced mobile unit Size H 2502 X W 3660 X D 381 mm
Sinking borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ca...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
3 core flat cable 4 Sq mm--Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Providing and fixing in position 50mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete a...
Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-4_Karkala_Devision.docx
Tender Document • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .