REPAIRS/REPLACEMENT TO E AND M INSTALLATION DG AND AMF PANELS AND CONNECTED WORKS IN ARMY AREA AT UDAIPUR MIL STN

Amount

Material and labour for complete servicing to DG Set 30KV - 01 Nos Make -Mahindra Powerol by pass filter assembly, lubricant oil filter assembly and air cleaner assembly. cleaning all the filter shell and replacing the fuel filter element etc,draining out the old used burnt engine oil from the oil sump and cleaning oil sump with suitable cleaning solution including replacement of following spares complete all as specified and directed. Note:- (i) Spares except above as required shall be measured and paid separately. (ii) The unit rate quoted by the tenderer shall also includes overall inspection of DG sets complete including tappet adjustment etc.

Supply only of Fuel Filter

Supply only of Lubricant oil filter

Supply only lubricant oil supply pipe

Air filter Element

Supply only of Coupling

Supply only of Fan belt

Supply only of carbon bush

Material and labour for complete servicing to DG Set 50 KV - 02 Nos Make -Cummins & Mahindra Powerol by pass filter assembly, lubricant oil filter assembly and air cleaner assembly. cleaning all the filter shell and replacing the fuel filter element etc,draining out the old used burnt engine oil from the oil sump and cleaning oil sump with suitable cleaning solution including replacement of following spares complete all as specified and directed. Note:- (i) Spares except above as required shall be measured and paid separately. (ii) The unit rate quoted by the tenderer shall also includes overall inspection of DG sets complete including tappet adjustment etc.

Supply only of Fuel Filter

Supply only of Lubricant oil filter

Supply only lubricant oil supply pipe

Air filter Element

Supply only of Coupling

Supply only of Fan belt

Supply only of carbon bush

Material and labour for complete servicing to DG Set 75 KV - 01 Nos Make - Mahindra Powerol by pass filter assembly, lubricant oil filter assembly and air cleaner assembly. cleaning all the filter shell and replacing the fuel filter element etc,draining out the old used burnt engine oil from the oil sump and cleaning oil sump with suitable cleaning solution including replacement of following spares complete all as specified and directed. Note:- (i) Spares except above as required shall be measured and paid separately. (ii) The unit rate quoted by the tenderer shall also includes overall inspection of DG sets complete including tappet adjustment etc.

Supply only of Fuel Filter

Supply only of Lubricant oil filter

Air filter Element

Supply only lubricant oil supply pipe

Supply only of Coupling

Supply only of Fan belt

Supply only of carbon bush

Material and labour for complete servicing to DG Set 100 KV - 01 Nos Make - Mahindra Powerol by pass filter assembly, lubricant oil filter assembly and air cleaner assembly. cleaning all the filter shell and replacing the fuel filter element etc,draining out the old used burnt engine oil from the oil sump and cleaning oil sump with suitable cleaning solution including replacement of following spares complete all as specified and directed. Note:- (i) Spares except above as required shall be measured and paid separately. (ii) The unit rate quoted by the tenderer shall also includes overall inspection of DG sets complete including tappet adjustment etc.

Supply only of Fuel Filter

Supply only of Lubricant oil filter

Air filter Element

Supply only lubricant oil supply pipe

Supply only of Coupling

Supply only of Fan belt

Supply only of carbon bush

Material and labour for complete servicing to DG Set 200 KV - 01 Nos by pass filter assembly, lubricant oil filter assembly and air cleaner assembly. cleaning all the filter shell and replacing the fuel filter element etc,draining out the old used burnt engine oil from the oil sump and cleaning oil sump with suitable cleaning solution including replacement of following spares complete all as specified and directed. Note:- (i) Spares except above as required shall be measured and paid separately. (ii) The unit rate quoted by the tenderer shall also includes overall inspection of DG sets complete including tappet adjustment etc.

Supply only of Fuel Filter

Supply only of Lubricant oil filter

Air filter Element

Supply only lubricant oil supply pipe

Supply only of Coupling

Supply only of Fan belt

Supply only of carbon bush

Material and Labour for taking out old U/S engine oil from DG Sets sumps, cleaning the sump throughly, supply & filling new engine oil complete of Make: Servo Super 20W40 of Indian Oil or Equivalent grade of Hindustan Petroleum as approved by AGE (I), complete all as specified and directed

Material and Labour for topping up of water coolant in radiator of DG set ,complete all as specifoed and as directed.

Repair/Overhauling of dynamo/charging alternator including replacement carbon, brushes holder, spring commutator/slip ring assembly bearing regulator of any make , type and capacity complete all as specified and as directed

Supply and fixing in replacement of old U/S automatic voltage regulator suitable for DG set of following rating of approved Make & model by the AGE(I), complete all as specified and as directed

Material and Labour for replacement of old U/S fuel shutdown valve assembly complete testing including replacement of old unserviceable valves of any capacity DG set, complete all as specified and as directed.

Material and Labour for replacement of old U/S bendix assembly of self starter of capacity 30 KVA to 200KVA DG set complete all as specified and as directed

Supply and fixing in replacement of old U/S top solenoid suitable for DG set of following rating of approved Make & model by the AGE(I), complete all as specified and as directed

Supply and fixing in repairs Electronic Controller in AMF Panel of DG Set capacity 30 KVA to 200 KVA and making all necessary connection and programming to make functional of DG Set

Material and Labour for replacement of SMPS based Electronic Battery Charger suitable for 12/24 Volts battery charging system complete as specified and as directed.

Supply and replacement of old unserviceable battery 12Volts 180 AH maintenance free suitable for DG sets complete as specified and directed. Make-Amron,Exide,luminous

Supply and replacement of old unserviceable battery 12Volts 150 AH maintenance free suitable for DG sets complete as specified and directed. Make-Amron,Exide,luminous

Supply and replacement of old unserviceable battery 12Volts 100 AH maintenance free suitable for DG sets complete as specified and directed. Make-Amron,Exide,luminous

Material and Labour for replacement of on load change over switch 4 pole, 415Volt, of capacity 63Amps, complete as specified and directed.

Material and Labour for replacement of on load change over switch 4 pole, 415Volt, of capacity 100Amps, complete as specified and directed.

Cutting unaxious green growth and wild grass by manual labour or by machine at Water supply Installation Premises, around Pole, along the boundary Fencing, removing rubbish from the Site of Work and deposting where directed not exc. 100 Metre from the starting Point, complete all as specified and as directed.

Material and Labour for laying LT underground Cable, including taking down existing u/s XLPE insulated, heavy duty armoured sheathed 1100 volts grade 95 Sq mm, 4core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete with all as specified.

Material and Labour for laying LT underground Cable, including taking down existing u/s XLPE insulated, heavy duty armoured sheathed 1100 volts grade 70 Sq mm, 4core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete with all as specified.

Material and labour for spreading, levelling in layers n exc. 25 cm thick and ramming of sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured

Supply and laying reinforced precast concrete cable cover, class LV, type 1 flat, 250mm x 150mm x 40mm.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Disconnecting of electric main connections from the existing unserviceable motor control panel removing effected parts, cleaning complete to carryout various repair/replacement work and connecting up electically after repair work in and including providing new internal wiring within control panel board for connecting up of connector/relay/voltmeter with suitable size twisted type PVC insulated complete with bottle neck lugs/thimble and new nuts & bolts if required connection shall be properly bunched, tied and dressed, ferrule markred for proper identification and shall be wrapped with PVC spring type tube near the door hinges complete all as directed by Engr-in-charge

Supply and mixing of ferric Alum as and when required complete all as specified and directed

Supply and mixing of Bio-Nuts for healthy growth of bacteria in waste water treatment plants for B.O.D related treatments as and when required complete all as specified and directed Make : TES (Techno Economic Services) or equivalent

Supply and mixing of liquid chlorine in 50 ltrs containers (containers will be kept in custody of plant staffs and not return to contractor) as and when required complete all as specified and directed

Material and labour for opening of centrifugal pump capacity 15 HP by disconnecting from motor and pipe, strip opening the pump and replacement of unserviceable parts such as impeller, SS bushes, shaft sleeves, ball bearing, nut bolts, gland plate, gasket, water hose pipe, water seal etc and lathe work/turning, grinding etc on shaft and shaft key way as required including greasing/oiling and re-assembling at the same location with proper alignment with motor and testing complete all as specified and directed by Engineer-in-charge. Note : - (i) Major items like impeller, bearing, bush, gland plate, tyre coupling, coupling assembly shall be measured and paid for separately under respective items of BOQ as “Supply only”. (ii) Cost for transportaion to workshop and carry back to site after repair is inlcuded in the unit rate of item nothing extra shall be paid on this acount.

Material and labour for opening of centrifugal pump capacity 10 HP by disconnecting from motor and pipe, strip opening the pump and replacement of unserviceable parts such as impeller, SS bushes, shaft sleeves, ball bearing, nut bolts, gland plate, gasket, water hose pipe, water seal etc and lathe work/turning, grinding etc on shaft and shaft key way as required including greasing/oiling and re-assembling at the same location with proper alignment with motor and testing complete all as specified and directed by Engineer-in-charge. Note : - (i) Major items like impeller, bearing, bush, gland plate, tyre coupling, coupling assembly shall be measured and paid for separately under respective items of BOQ as “Supply only”. (ii) Cost for transportaion to workshop and carry back to site after repair is inlcuded in the unit rate of item nothing extra shall be paid on this acount.

Material and labour for opening of centrifugal pump capacity 7.5 HP by disconnecting from motor and pipe, strip opening the pump and replacement of unserviceable parts such as impeller, SS bushes, shaft sleeves, ball bearing, nut bolts, gland plate, gasket, water hose pipe, water seal etc and lathe work/turning, grinding etc on shaft and shaft key way as required including greasing/oiling and re-assembling at the same location with proper alignment with motor and testing complete all as specified and directed by Engineer-in-charge. Note : - (i) Major items like impeller, bearing, bush, gland plate, tyre coupling, coupling assembly shall be measured and paid for separately under respective items of BOQ as “Supply only”. (ii) Cost for transportaion to workshop and carry back to site after repair is inlcuded in the unit rate of item nothing extra shall be paid on this acount.

Supply only ball bearing suitable for centrifugal Pump set assembled with 10 HP motor complete all as specified and directed by Engineer-in-charge.

Supply only ball bearing suitable for centrifugal Pump set assembled with 7.5 HP motor complete all as specified and directed by Engineer-in-charge.

Supply only coupling assembly for flexible rubber tyre suitable for centrifugal pump set assembled with 15/10/7.5 HP motor complete all as specified & as directed by Engineer-in-charge.

Material and labour for rewinding of Electric motor of 15 HP, three phase, 415 volts, AC, with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape and making proper electrical connection after taking out old brunt out motor complete all as specified and directed by Engineer-in-charge. Note : Transportation of motor to contractor's workshop is included in the unit rate of items and nothing extra shall be paid on this account.

Material and labour for rewinding of electric motor of 10 HP, three phase, 415 volts, AC, with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape and making proper electrical connection after taking out old brunt out motor complete all as specified and directed by Engineer-in-charge. Note : Transportation of motor to contractor's workshop is included in the unit rate of items and nothing extra shall be paid on this account.

Material and labour for rewinding of electric motor of 7.5 HP, three phase, 415 volts, AC, with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape and making proper electrical connection after taking out old brunt out motor complete all as specified and directed by Engineer-in-charge. Note : Transportation of motor to contractor's workshop is included in the unit rate of items and nothing extra shall be paid on this account.

Supply and fixing in replacement of power contactor, AC3 rating, 32 Amps, 3 Pole, AC control with Auxiliary contacts 2 NO + 2NC, suitable for coil voltage 110 V, 220, 240 & 415 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of power contactor, AC3 rating, 12 Amps, 3 Pole, AC control with Auxiliary contacts 2 NO + 2NC, suitable for coil voltage 110 V, 220, 240 & 415 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of thermal over load relay adjustment range 23-32 amps with all electrical wiring complete all as specified & as directed by Engineer-in-charge.

All as per item No 43 here-in-above but adjustment range 9-13 / 7-10 / 5.5-8 / 4-6 / 2.5-4 Amps

Supply only in replacement of electronic timer 0 to 30 second for star - delta changeover, DIN mounting complete all as specified & as directed by Engineer-in-charge.

Supply only in replacement of 3 phase preventor (SPP) with auto reset, 415 Volts AC complete all as specified & as directed by Engineer-in-charge.

Supply only in replacement of push button, ON/OFF, Red/Green complete all as specified & as directed by Engineer-in-charge.

Material and labour for servicing of Air blower of Make : Usha, speed 1510 RPM with 20 HP motor by greasing, oiling and draining out of old oil and charging of new oil after replacement of unserviceable items (Suction filter, Set of seal and O ring, bearing, piston rings, bush, retainer, pressure guage, gasket, nut, bolts & washer)and any other items required for smooth functioning of blowers complete all as specified and directed by Engineer-in-charge.

Supply only air filter for blower assembled with 20 HP motor as per existing make and model complete all as specified and directed by Engineer-in-charge.

Supply only Gear oil for air blower (Castrol Hypoy 90EP / HP EP90)complete all as specified & as directed by Engineer-in-charge.

Material and labour for taking out spindle, nut and gate assembly from sluice valve of size 150 /250/300 mm bore and replacement of bronze nut with internal threading, welding work, finishing work gland packing, rubber gasket as required to make smooth funtioning and refixing in the same position, complete all as specified and directed by Engineer-in-Charge. Note :- Excavation & earthwork including dewatering etc required for the job is deemed to be included in the rate quoted.

Supply and fixing mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, cooler stand, framework of water tanks and similar works of quality Fe 290 (Gde E-165) etc complete all as specified and directed by Engineer-in-charge.

Lifting/ lowering of non clog sewage submersible pump / monoblock pump set of the capacity 3.0,10 HP from the sewage pump houses & STP PLANT Lifting : Disconnection of outgoing delivery mains and eletrical connection from the panel and lifting of unserviceable non clog sewage submersible pump set of any depth alongwith column pipe, SWR rope including existing submersible cable and check the unserviceability,remove the sludge/ poly bags/ cement bags/any solid items from inside the pump bowel/impellor and make good working condition with all safetyes etc complete all as directed. Lowering :- Lowering the non clog sewage submersible pump after making operational condition alongwith column pipe, SWR rope including existing submersible cable and all respective items here-in- above lifting and installation of pump motor in its original position, connections the as well as delivery main including electrical connectiion of both end i.e. with starter and motor terminals. Note :- Note :- (a) Rate quoted against items deemed to be included for lifting /lowering. delay may be penalised Rs: 1000/- per/hour.

Material and Labour for repairing and servicing /cleaning complete of submersible pump set of the capacity 10.0 HP with replacement of worn out /unserviceable parts and reassembling the same after complete repair with accessories such as nut, bolts, washers etc. Installation with proper alignment including testing, commissioning complete to the entire satisfaction of Engr-in-charge. Note:- All spare parts as required for repair/overhauling shall be measured and paid separately under relevant item of Schedule 'A' and the spares should be suitable to as per above refered model No & make of KSB.

(i) Cutting and taking out existing burnt out/unserviceable copper winding from the stator unit of non clog sewage submersible pump set Cleaning of slots and complete stator unit with using carbon tetra chloride (CTC Solution). Material and labour for rewinding the motor with 'F' class super enamelled copper wire of existing size/gauge including providing bi-metallic thermal overload protection and all necessary insulating materials such as varnish, insulating paper, sleev etc for the following capacity of 10.00 HP motor.

(ii) bearing suitable to above make pump & motor

(iii) Oil seal

(iv) Impeller wear ring

(v) Bearing sleeve

(vi) Cable duct

(vii) colling oil for Motor (ISO VG 68)

Material and Labour for repairing and servicing /cleaning complete of submersible pump set of the capacity 3.00 HP with replacement of worn out /unserviceable parts and reassembling the same after complete repair with accessories such as nut, bolts, washers etc. Installation with proper alignment including testing, commissioning complete to the entire satisfaction of Engr-in-charge. Note:- All spare parts as required for repair/overhauling shall be measured and paid separately under relevant item of Schedule 'A' and the spares should be suitable to as per above refered model No & make of KSB.

(i) Cutting and taking out existing burnt out/unserviceable copper winding from the stator unit of non clog sewage submersible pump set Cleaning of slots and complete stator unit with using carbon tetra chloride (CTC Solution). Material and labour for rewinding the motor with 'F' class super enamelled copper wire of existing size/gauge including providing bi-metallic thermal overload protection and all necessary insulating materials such as varnish, insulating paper, sleev etc for the following capacity of 3.00 HP motor.

(ii) bearing suitable to above make pump & motor

(iii) Oil seal

(iv) Impeller wear ring

(v) Bearing sleeve

(vi) Cable duct

(vii) colling oil for Motor (ISO VG 68)

Taking out old leakage/unserviceable butterfly valves of size 50,80 & 100 mm from various location in Sewage Treatment plant, Sewage pump houses and swimming pool complete all as directed by EIC.

Supplied and installed butterfly valve with standard case flaged type of make: Normax/auma/honeywell , confirming to IS-13095 complete of the following sizes: (a) 50 mm dia

(a) butterfly valve size 80 mm.

(b) Butterfly valve size 100mm.

Material and Labour for taking down existing old unserviceable cable of any size and Supply laying flexible flat PVC insulated PVC sheathed copper couductor stranded submersible cable,1100 volts grade (a) 4 Sqmm 3 core including jointing material and connection work. Make : Polycab/Finolex/Havells.

(a) All as per above item No.19 but 6 Sqmm 3 core

Supply only Bearing Grease in 1 Kg Packing

Supply and replace Digital voltage meter suitabel for 3 phase AC in MA panel at STP of suitable size required at site

Supply and fixing stainless steel short heavy duty chain in sewage sump motors placement in sump house locations and sewage pump at STP complete as specified and directed by Engr-in-Charge

Material and Labour for taking up raising/ delivery CI/DI/MS/GI water mains (including all fittings), with flanged or spigot and socket ends and rubber tytan / flanged joints and nut bolts of any size all as specified and dirercted by Engr-in-Charge of following sizes

(a) 150 mm bore.

(b) 200 mm bore.

Supply and lay DI pipe centrifugally cast of class K-7 with flanged ends including rubber gasket nut bolts for the following sizes.

(a) 150mm bore

(b) 200mm bore

Material and labour for refilling overhauling and replacement of Filter Media of 1No x sand and 1No x carbon filetr vessels at STP including Performing the following: -(a) Unloading of exhausted Carbon media and Anthracite & Silica from the sand and carbon filer vessel with proper care (b) Thorough cleaning and scraping inside the existing sand & carbon Filters vessel properly including painting with two coats of anticorosive black bituminous paint inside and out side of the filter shells with two coats of anticorrosive/ Red oxide etc. (c ) fixing new strainer Pipes as per existing (d) filling of new Activated Carbon media and Anthracite & Silica in to the carbon and sand filter vessel. (e) Re-Commissioning and testing of the existing filter plant by the reputed service Engineer all as directed. after completion of work.

Material and labour for fixing DI specials such as bends(any type, radius and angle),tappers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps & plugs of sizes :- 100 mm bore to 300 mm bore

Material and labour for replacement fuel tank of 50 KVA DG set as per existing size and sutaible for existing DG set make complete as per specified and directed by engr-in-charge.

Testing of STP water for TDS . BOD ,COD, PH , DO, Coliform at any location from receving inlet, secondary treatment and tertiary treatment from any recognised LAB.

M/s K R and Sons (BID ID -3322206)

Sadhana Enterprises (BID ID -3327028)

m/s sharma constructions (BID ID -3329274)