Work of shifting HT/LT line against full deposit scheme in the area of EUDD-Civil Line, Muzaffarangar

Amount

Carrage of following line materials from ESC to work site inculding safe loading and unloading at both ends as per site condition :-

ST Pole 13 mtr Long

ST Pole 11 mtr Long

ST Pole 9 mtr Long

Earthing set complete

33/11 KV X-arms V-Type

GI- wire 6/4/8/10 SWG for garuding

ACSR dog conductor

ACSR Rabbit conductor

LT ABC Cable (3x95+1x70+1x16) Sqmm.

LT Distribution Box 1 Phase

LT Distribution Box 3 Phase

LT AL XLPE Cable 1CX240 SQMM

LT AL XLPE Cable 1CX120 SQMM

Stay Set Complete

11 KV Polymeric pin insulator

11 KV Polymeric disc insulator with fitting

33 KV Polymeric pin insulator

33 KV Polymeric disc insulator with fitting

11 KV D/O Fuse set

11 KV TPMO switch

MS channel/angle

T-Off channel

Top channel 100x50x2240

Dropper channel 100x50x2240

Top channel 125x65x3200

Errection of Single Support of ST Pole 11 Mtr Long and fixing all accessories as per norms (Nut, bolts, stone pad, Peirceing connector, Ten Buckeel, MID span jointing sleeve and clamps will be provided by contractor as per required)

Errection of Single Support of ST Pole 9 Mtr Long and fixing all accessories as per norms (Nut, bolts, stone pad and clamps will be provided by contractor as per required)

Errection of Single Support of ST Pole 13 Mtr Long and fixing all accessories as per norms (Nut, bolts, stone pad, F-Bracket, MID span jointing sleeve and clamps will be provided by contractor as per required)

Errection of Double Pole Structure of ST Pole 11 Mtr Long and fixing all accessories as per norms (Nut, bolts, stone pad, Peirceing connector, Ten Buckeel, MID span jointing sleeve and clamps will be provided by contractor as per required)

Laying of ACSR Rabbit Condouctor

Laying of ACSR Dog Condouctor

Febrication of MS channel/angle

Providing and fixing of G.I. barbed wire

Installation and commissioning of LT distribution box 1 phase

Installation and commissioning of LT distribution box 3 phase

Laying of LT AL XLPE CABLE 1CX240 SQMM

Laying of LT AL XLPE CABLE 1CX120 SQMM

Errection fo 11 KV Fuse Set

Errectiono f 11 KV TPMO switch

Guarding of 11 KV Line with (Holding clamp with bolts and nut, EYE bolt will be bprovided by contractor)

Laying of LT ABC Cable (3x95+1x70+1x16) Sqmm. (Nut, bolts and clamps will be provided by contractor)

Errection of earthing complete as Per Norms.

Opening and reconnecting of LT consumer cable

Errection of stay complete and Grouting of stay rods including all work of excavation, cement concreet in size .60x.60x.30mm in ration 1:4:4 (Cement, sand, 40mm brick ballast) as per drg. including back filling & proper ramming etc. with fixing tightening & nuzzling of stay set with the pole (all material provided by contractor).

Grouting of Pole with cement, sand, bricks CC ratio1:4:4 as per RESPO norms (all material provided by contractor).

Dismentiling of 250 KVA transformer form plinth and disconnection of LT and HT side.

Dismentiling of 100 KVA transformer form D/P and safely carriage to new site.

Dismentiling of 25 KVA transformer form D/P and safely carriage to new site.

Making of Plinth of size (6'x6'x6') for placing transformer. Plinth constructed by 2:3:5 cement, sand and first class bricks and plinth covered by plaster with 1:3 cement and sand for smooth working all complete the works. (all materials provided by contractor).

Providing of earth electrode for chemical earthing pipe in pipe type proper hot dip Galvanization die 50mm length 3 mtr-32mm x 6mm terminal connection hole dia 8mm. The cavity between the pipe & pipe if filled with conductive mixture for hermetically filling inside the cavity i.r. between secondary conductor & Primary conductor & Primary conductor, crystalling compound is to be injected in the electrode assembly. It is a combination of high conductivity metal alloys, copper & aluminium power, conductivive carbon/ cement and bonding material etc. The electrode should be sealed from both the ends.

Making of fiber Fancing for 250 KVA transformer (all material will be provided by contractor)

Errection of 250 KVA transformer on plinth and re-connection of LT and HT side.

Errection of 100 KVA transformer on D/P and connection of LT and HT side (Lugs will be provided by contractor)

Errection of 25KVA transformer on D/P and connection of LT and HT side (Lugs will be provided by contractor)

Cutting and choping of tree branches

Providing and fixing of danger board with clamp.

Providing and fixing of number plate with clamp.

Providing of alluminium paint and painting of electric poles

Providing of Red oxide paint and paintng of electric poles

Dismentiling of following materials and carrage of materials from site to JE Store inculding safe loading and unloading at both ends as per site condition -

STP Pole With fitting

Dismentliing of PCC Pole with fitting

ABC cable

AB Conductor

Dog conductor

M/S ABID CONTRACTOR (BID ID -5382432)

A.K.ELECTRICALS (BID ID -5383917)