REPAIR/MAINT TO SANITARY FITTINGS, PLUMBING, PLINTH PROTECTION, JOINERY, ROOF TREATMENT ETC IN ZONE II

Amount

S & F 15 mm bore GI tubing medium grade with all necessary fitting fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed.

S & F 20 mm bore GI tubing medium grade with all necessary fitting fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and ctting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

M & L in repair 15mm bore bib tap fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down high pressure, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Supply & fix as in repairs of 15mm bore cast copper alloy CP stop cock /angle cock fancy type screwed down with iron pipe or for union fixed complete all as specified and directed.

Supply & fix in repairs 15mm bore CP brass mixer for mixing hot & cold water complete with nipple and arms complete all as specified.

Supply & fix in repairs 15mm bore CP pillar tap with capstan head screwed down high pressure with or without 'Hot' or ' Cold' with long screwed shank and fly nuts screwed for iron pipe fancy type complete all as specified and directed.

Supply & fix as in repairs 15mm bore cast copper alloy CP stop valves chromium plated with long shank and cup fancy type(concealed type) screwed down with iron pipe or for union fixed complete all as specified and directed.

Supply & fix in repair cast copper alloy chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

Supply & fix in repair 20mm bore ball valve high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Note : min wt 210gms.

Supply & fix 32mm bore waste coupling of PTMT (half or full) threaded complete all as specified and directed. Min wt 32mm-45 gms)

S&F in repairs 10 litre capacity PVC low level syphonic action flushing cistern with all accessories, inlet ball valve float and handle including brackets complete fixed with WC including syphone pipe, PVC flushing pipe complete all as specified and directed.

Supply & fix in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply & fix in repair of door closer cast iron body, hydrulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 60 to 80 kg and fixed complete all as specified and directed.

Supply & fix in repair of plastic water closet seat cover closed pattern with flat bottom and cover mild steel CP hinging device fixed complete all as specified and directed.

M&L for welding in repairs n. exc 2.5cm in length like hinges, tower bolt and similar work, thickness of metal to be welded n exc 6mm complete all as specified and directed.

Supply & fix in water storage tanks 500 litres capacity, rotational moulded, double layer polythene (cylindrical vertical with closed top) hoisting and fixed in position on roofs all as specified in SSR Part-I incl dismantling old one and removing complete all as specified.

Supply & fix in water storage tanks 1000 litres capacity, rotational moulded, double layer polythene (cylindrical vertical with closed top) hoisting and fixed in position on roofs all as specified in SSR Part-I incl dismantling old one and removing complete all as specified.

Supply & fix in repairs stainless steel curtain rod, powder coated with fixing side brackets, end cups, and fixed with PVC rawl plugs & steel screws complete all as specified and directed.

S &F in repairs tubular towel rail 20mm dia 600mm long of brass chromium plated fixed with brackets and including chromium plated brass screws and wooden/plastic cleats complete all as specified.

S &F in repairs Wash hand basin, flat back 550x400mm vitreous china (white) including chromium plated waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore,65mm long & making good disturbed surfaces to match with the existing complete all as specified.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm complete all as specified and directed. .

S&F in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to ipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments complete all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ of 1.2 Kg/Sqm including cleaning of surfaces in sunken floor treatment complete all as directed.

Material and labour for rendering 10 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, with using liquid water proofing compound @ 200 ml per 50 kg bag of cement or as per manufracture's instructions, finished even and smooth without using extra cement complete all as specified and as directed.

Supply & Fix in repair water closet vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests including trap but (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F in repairs Vitreous China, pedestal pattern (EWC) white in colour with and including plastic seat cover white closed pattern with flat bottom and cover and MS chromium palted hinging device including connecton to outgoing pipe, size 580 x440 mm white, with integral foot rests (excluding flushing cistern ), fixed in repair all as specified.

Taking down eaves gutters and rain water pipes (any size or pattern) including fittings heads, shoes bends swan neck etc complete.

S&F PVC(SWR) 75 mm bore juction single T equal or unequal with access door complete all as specified and directed.

S & F PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to wall with stack clamps complete all as specified and directed.

S & F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall with stack clamps complete all as specified and directed.

S&F in repair PVC (SWR) Bends 110mm bore, with oval access doors complete all as specified and directed.

S&F in repair PVC (SWR) Bends 75 mm bore, with oval access doors complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowls complete all as specified and directed.

S&F PVC(SWR) 75 mm bore branch piece,single y equal or unequal with access door complete all as specified and directed.

S&F PVC(SWR) 110 mm bore branch piece, single y equal or unequal with access door complete all as specified and directed.

S&F 110mm bore PVC(SWR) reducers complete all as specified and directed.

S & F in repair PVC grating doom 125 mm dia with waste hole of PTMT (Min Weight 40 gms) complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed

M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works complete all as specified and directed.

Rounding to edges of stones slabs one edge,such as in steps, cooking platform and other similar situations complete all as specified and directed.

M&L for Plain Cement concrete (1.2.4) type B-1 using 20mm graded stone aggregate as in floor, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

M&L coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in vertical surfaces such as skirtings and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl backing coat 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Non - skid joint free Ceramic tiles 7 to8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

Non - skid joint free Ceramic tiles 7 to8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces such as skirtings and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl backing coat 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

M&L rendering/backing coat 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match incl backing coat 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

S& F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

,---ditto--- all as per srl item No 55 above but incl hacking out of old broken glass complete all as specified and directed.

S&F in repairs fancy type CP Health faucet 15 mm bore (ISI marked) including extension Pipe of 1 Mtr Long complete all as specified and directed. Make - CERA Cat Part No CG 105A or equivalent in Hindware/ Jaquar as approved by GE

S&F in repairs corner glass shelf large 300mm x 300mm complete all as specified. Make - CERA Cat Part No CA 503 or equivalent as approved by GE

S&F in repairs CP jet spray suitable to EWC with 01 mtr pipes complete all as specified and directed.

S&F in repairs stainless steel plate rack 600x600x225mm of approved quality made of 1 mm th sheet min wt 4.7 kg complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floors and all other similar works complete all as specified and directed.

M&L Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position incl cleaning and removing all scale and dirt, etc, from tanks exc 250 ltr & n exc 500 ltr and from mouths of circulating pipes, etc

M&L for 75 mm PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including demolition necessary complete all as specified and directed.

M&L for Complete removal of existing treatment of old plastered surfaces of wall, filling nail holes and applying two coat of oil bound distemper complete all as specified

M & L prepartation of old plastered surfaces, filling depressions with putty and applying two coats of oil bound distemper on ceiling complete all as directed.

S&F Complete removal of existing treatment of walls by mechanical means and applying two coat of Exterior acrylic emulsion weather proof paint over a coat of alkali resistant primer on walls and over a coat of alkali resistant priming paint complete all as specified.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm and n.exc 4.00 sqm each complete all as specified and directed.

Taking down shutter of any description area exc 1.00 sqm and n exc 2.00 sqm each complete all as specified and directed.

M&L Framed work as in doors, trusses or gates of angle or other section as chowkhat., tie bar, hold fast, guard bars complete, drilled for fixing complete

S&F Factory made 35 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

M&L 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats as directed by Engineer-in-Charge.

S&F Flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F in repairs to galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples fixed in repair in wooden doors and steel windows

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified .

M& L mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm

M& L Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm complete all as specified and directed.

Supply & fix 75 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

Supply & fix mild steel 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate complete all as specified and directed.

Supply & fix 150 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

Supply & fix 150 mm long aluminium handles, cast type, anodised complete all as specified and directed.

Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying a coats of synthetic enamel paint complete all as specified and directed.

M&L for two coat of synthetic enamel paint (ordinary tint) to the new steel surfaces having shop coat primer red oxide (zinc chrome) over 10 cm in width or girth not otherwise described complete all as specified and directed.

M&L for preparing old steel surfaces of any description not otherwise described over 10cm in width or girth and applyingapplying one coats of synthetic enamel paint complete all as specified

S&F powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors/windows/ ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing,locks, anodised alumnium snap beading, screws etc. complete all as specified

S&F 5.5 mm thick frosted sheet glass,ordinary quality and glazing with oil puttyin square not exceeding 0.5 sqm each pane complete all as specified and as directed.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Supply and fix 50 micron thick coloured powder coated aluminium anodised grill design No DG-117,10 mm thick including F Sections complete all as specified and directed. Make :- M/s Deco grill / M/s Royal grill or Equivalent

Dismantling boarding of any description fixed in any position with screws/nails complete all as specified.

S&F in repairs 19/20mm thick exterior grade prelaminated particle board(Prelaminated on one side) as in CB shutter, pelmet including 6mm thick teak wood leaping and necessary rebating for double shutter where required including polishing to leaping complete all as specified.

M&L in repairs for 18/19mm thick prelaminated particle board medium density flat pressed single layer or three layer type, BWP, exterior grade, fixed with screws to timber frame work, complete all as specified.

S&F Cupboards knobs 40 mm dia of brass polished complete all as specified.

Supply & fix 125 mm hasp and staplees, safty type aluminium anodised with MS hinges pin incl bolt to hing plate and fixed with screw complete all as specified and directed.

S&F continuous piano hinges mild steel bright finish or electro galvanised width of flap 30mm complete all as specified and directed by Engr-In-Charge

Taking down existing treatment complete including PCC and properly clean the surface to remove loose particles with wire brushes and removing the debris out side of MoD Land complete all as specified and directed by Engr-In-Charge

M&L for screed plaster 15 mm thick in CM 1:4 on roof surface complete and finished the surface even and smooth without using extra cement etc. complete all as specified and directed

M&L for 40 mm thick cement concrete in CM 1:2:4 type B-0 (12.5 mm graded stone aggregates ) average as in RCC roof surface to horizantal surface etc.incl water proofing compound @2% by weight (note: WPC wil be measured and paid separately) complete all as specified and directed

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS: 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane including two coats of aluminium paint complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound complete all as specified and directed.

Taking down cement plaster on brick / stone wall, ceiling etc incl. raking outs joints hacking for key scrubbing with water

M & L for Rendering 15mm thick on brick/stone masonery or other than fair faces of brick work on wall in CM 1:6 surface finished even and smooth w/o extra cement complete all as specified

M&L Rendering 10 mm thick on ceiling/RCC Facias etc in CM(1:3) finished even and smooth without using extra cement complete all as specified

M&L for preparing new plastered ceiling surfaces and applying three coat of white wash complete all as specified

M&L for preparation of new plaster surfaces of walls and applying two coat of oil bound distemper over a coat of primer complete all as specified

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

J.J.ENGINEERING