Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹61,900
Closing Date
29 Oct 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
Ram Mandir - Electrical (Power) work in connection with replacement of indoor signaling installation with electronic interlocking.
EL-81-19-113-WA-41~WR
EL-81-19-113-WA-41
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹61,900
5 Oct 2026
5 Oct 2026
15 Oct 2026
81 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 30,96,818 | ||
| — | 250.00 | — | — | ||
| Supply of material and providing light/fan point concealed wiring, with single core multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 1.5 sq.mm. for phase, neutral & earth wire and modular switches, complete with all accessories, junction box, ceiling rose etc, as per specifications in Annexure I. | — | — | — | 1,31,500 | |
| — | 550.00 | — | — | ||
| Supply of material and providing main/ submain concealed wiring with single core multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 2.5 sq.mm., with set of 3 wires for phase, neutral & earth wire, as per specifications in Annexure II.(Qty Unit - RM = (Running Meter) | — | — | — | 61,050 | |
| — | 750.00 | — | — | ||
| Supply of material and providing main/ submain concealed wiring with single core multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 4.0 sq.mm., with set of 3 wires for phase, neutral & earth wire, as per specifications in Annexure II. (Qty Unit - RM = (Running Meter) | — | — | — | 1,16,250 | |
| — | 4.00 | — | — | ||
| Supply and fixing of modular concealed mounting box of six module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. | — | — | — | 596 | |
| — | 6.00 | — | — | ||
| Supply and fixing of modular concealed mounting box of twelve module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. | — | — | — | 1,332 | |
| — | 8.00 | — | — | ||
| Supply and fixing of modular concealed mounting box of eighteen module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. | — | — | — | 1,888 | |
| — | 100.00 | — | — | ||
| Supply, fixing, testing & commissioning of modular socket 3 pin of 6A capacity with 10A one way modular switch, as per specifications in Annexure IV. | — | — | — | 14,600 | |
| — | 60.00 | — | — | ||
| Supply, fixing, testing & commissioning of modular power socket 3 pin twin heavy duty of 6/16 A capacity with 20A one way modular switch having neon indicator, as per specifications in Annexure V. | — | — | — | 15,420 | |
| — | 6.00 | — | — | ||
| Supply, fixing & commissioning of weather proof modular power socket 3 pin twin heavy duty of 6/16A capacity with 20A SP modular MCB in enclosure made of non metallic polycarbonate thermoplastic material, IP 65, as per specifications in Annexure VI. | — | — | — | 9,000 | |
| — | 4.00 | — | — | ||
| Supply, fixing, testing & commissioning of MCB DB single phase with RCCB in m.s. enclosure, I/C-DP MCB of 40A - 1No. & DP RCCB of 40A - 1No., O/G: SP MCB of 6A-32A - 8Nos., as per specifications in Annexure VII. | — | — | — | 18,892 | |
| — | 4.00 | — | — | ||
| Supply, fixing, testing & commissioning of MCB DB three phase with RCCB, in m.s. enclosure, out door type, I/C- FP MCB of 63A - 1No. & FP RCCB of 63Amp - 1No and O/G: SP MCB of 10-32 Amp - 12Nos, as per specifications in Annexure VIII. | — | — | — | 31,000 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing & commissioning of energy efficient BEE 5 star rated BLDC ceiling fan 1200mm (48") sweep with down rod, modular electronic regulator step type/ remote type and standard accessories, fan & regulator shall be compatible to work with various makes & models, as per specifications in Annexure IX. (Minimum Warrantee - 2 years) | — | — | — | 51,680 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of exhuast fan 8"/9" of plastic blade, as per specification given in Annexure X. | — | — | — | 1,936 | |
| — | 4.00 | — | — | ||
| Supply, fixing, testing & commissioning of super energy efficient BLDC motor industrial exhaust fan of size 300mm (12") sweep and standard accessories, as per specifications in Annexure XI. (Minimum Warrantee - 2 years) | — | — | — | 20,892 | |
| — | 40.00 | — | — | ||
| Supply, fixing, testing & commissioning of indoor type LED luminaires 20W (maximum, including driver), 4 ft long, System efficacy greater than or equal to 110 lm/W, Lumen Output greater than or equal to 2000 lumens, Colour consistency CRI greater than or equal to 80, Driver Surge protection greater than or equal to 2.5KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). Luminaires complete with all accessories and other specifications as per Annexure XII. (Minimum Warrantee - 5 years) | — | — | — | 8,200 | |
| — | 12.00 | — | — | ||
| Supply, fixing, testing & commissioning of LED street light lumaires 60W maximum, whether proof having IP 65/66 protection, System efficacy greater than or equal to 120 lm/W, Lumen Output greater than or equal to 7000 lumens, Colour consistency CRI greater than or equal to 70. Driver Surge protection greater than or equal to 4KV.The luminaire should have a potted driver, mounted inside the luminaire. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site).Luminaries complete with all accessories and other specifications as per Annexure XII. (Minimum Warrantee - 5 years) | — | — | — | 27,588 | |
| — | 2.00 | — | — | ||
| Provision of new fire extinguishers, 6 KG DCP type, as per specifications in Annexure XIII. | — | — | — | 2,862 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing and commissioning of 125A, 4 pole electronic / microprocessor based MCCB, with inbuilt earth fault protection along with earth leakage protection having shunt coil, earth leakage relay 30mA -30A CBCT etc., in sheet steel enclosure, as per specifications in Annexure XIV. | — | — | — | 52,182 | |
| — | 500.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 16 sq.mm.x 4 core, as per specifications in Annexure XV. | — | — | — | 54,000 | |
| — | 500.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 70 sq.mm.x 4 core, as per specifications in Annexure XV. | — | — | — | 1,73,500 | |
| — | 136.00 | — | — | ||
| Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded copper conductor cable of size 10 mm² x 2 core, as per specifications in Annexure XV. | — | — | — | 36,584 | |
| — | 8.00 | — | — | ||
| Supply, fixing, testing & commissioning of aluminium lugs of size 70 sq.mm. for cable termination, as per specifications in Annexure XVI. | — | — | — | 200 | |
| — | 50.00 | — | — | ||
| Excavation of the cable trench in normal soil under rail/ road and refilling back the excavated earth, restoring /repairing of flooring after lying of cable, as per specifications in Annexure XVII. | — | — | — | 5,400 | |
| — | 20.00 | — | — | ||
| Excavation of the cable trench in hard soil under rail/ road/rocky soil / platforms (stone/RCC/Rock) and refilling back the excavated earth, recasting of flooring after lying of cable, as per specifications in Annexure XVIII. | — | — | — | 15,720 | |
| — | 598.00 | — | — | ||
| Supply of material & saddling to the cables with GI saddles:1. The cable shall be fixed on walls/structures with G.I. saddle thickness of 1.2mm and G.I. base and suitable for the size of cables, minimum two saddles per meter shall be used while saddling the cable. 2. Galvanized base shall be provided below the cable and the base shall be fixed firmly first with M.S. fasteners of required size / standard quality counter sunk headed self-threading G.I. screw. Same shall be used for saddles also. | — | — | — | 28,704 | |
| — | 450.00 | — | — | ||
| Supply of material, fabrication of clamps of size minimum 25x3 mm & GI screw of size minimum 2 inch, and clamping of cables :1. The cable shall be clamped on wall / structure of station building or any service building with G.I. clamps made out by G.I. flat of 25mm x 3mm size minimum and GI screw of size minimum 2 inch, at every one meter distance. 2. The clamp shall be suitably shaped as per site requirement. The clamp shall be fabricated after the site survey by the contractor, as per actual size/ load requirement. GI flat spacers shall be of minimum 3 mm thick.3. All the cables shall be clamped individually.4. The clamp shall be fixed with suitable galvanized nut bolts/ fasteners with washers / standard quality counter sunk headed self-threading G.I. screws. | — | — | — | 35,100 | |
| — | 4.00 | — | — | ||
| Supply, fixing & commissioning of cable looping junction box, weatherproof for single phase, made of glass fiber reinforced polyester GRP/FRP moulding composite material, of minimum size 200mm x 140mm x 95mm (inside dimensions) with Kitkat fuse:1. The weatherproof junction box shall be made of glass fiber reinforced polyester moulding composite material, min.4mm thick, and suitable for outdoor mounting with locking arrangements.2. The box shall be suitable for single phase 3 wire, 230 volts AC supply system and a door with suitable hinges. 3. The inside dimensions of the box shall be 200mm H x140mm W x95mm D minimum and shall be fixed with proper fixing arrangements. 4. The box shall be provided with copper terminal connector suitable for 4 sq.mm x 2 core cable loop connections.5. The box shall be with pole mounting arrangement to be fixed on the pole with M S clamps made out by 25mm x 5mm flat in suitable shape duly painted with anti-corrosive red oxide and silver paint two coats of each as primer and final respectively. | — | — | — | 1,848 | |
| — | 50.00 | — | — | ||
| Supply and fixing of GRP / FRP cable tray, RED in colour, made of glass fiber reinforced polyester moulding composite material, size 50mm width x 50mm depth min., 03mm thick min., including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc., as per specifications in Annexure XIX. | — | — | — | 27,400 | |
| — | 80.00 | — | — | ||
| Supply & fixing of PVC casing & capping of size 50mm x 100mm with all accessories for covering of cables/ wires etc., as per specifications in Annexure XX. | — | — | — | 59,280 | |
| — | 1.00 | — | — | ||
| Supply of aluminum ladder of size 6 feet height (when open), double sided, made from aluminum section of minimum size - 66 x 31 x 3.15 mm thickness, 5 steps of 1 ft. width min., two way climbing, Top platform min. size 10" x 14", complete with anti-skid solid rubber at bottom, as per specifications in Annexure XXI. | — | — | — | 11,892 | |
| — | 1.00 | — | — | ||
| Supply of aluminum folding ladder of size 10 feet height (when open), double sided, made from aluminum section of minimum size - 66 x 31 x 3.15 mm thickness, 9 steps of 1 ft. width min., two way climbing, Top platform min. size 12" x 16", complete with anti-skid solid rubber at bottom, as per specifications in Annexure XXII. | — | — | — | 18,681 | |
| — | 1.00 | — | — | ||
| Supply of hammer type drill machine, heavy duty, 230V, 50Hz, Max Drilling in Concrete up to 22mm, complete with auxiliary handle, accessory set, Accepted make - Bosch GBH 220 SDS Plus Professional Rotary Hammer or similar of Stanley / Dewalt / Hitachi Rotary Hammer Drill. | — | — | — | 7,358 | |
| — | 2.00 | — | — | ||
| Supply of Digital Clamp Meter with following specifications: 3 ½ digits, LCD display, 2000 counts with automatic sign & function, 5 functions, Battery check function, Low battery indication, Overload protection, Audible continuity, Average Sensing, Over Range Indication, Diode Test, 200 A ac and dc current and 600 V ac and dc voltage measurement range, Resistance- 0.1 Ohms-3000 Ohms, Power supply- Single standard 9V Battery. Make- KUSUM-MECO KM 2700, FLUKE 362, RISHABH RISH 1000 AAC, MEGGER-DCM-310/EN, MITRAVI-DT-4250. | — | — | — | 7,478 | |
| — | 30.00 | — | — | ||
| Supply and fixing of drainage CPVC pipe line of plumbing grade conforming to Standard - IS 15778, Class-SDR 11, ISI marked, with threaded type accessories.Nominal bore size - 25 mm, thickness - 2.6 mm minimum with tolerance 0.51 mm or Nominal bore size - 40 mm, thickness - 3.8 mm minimum with tolerance 0.51 mm. Size of the pipe shall be decided by the SSE as per site requirement. PVC pipe line shall be fixed by PVC/G I saddling with proper slope so as to drain out the condensate water easily. Drainage pipe line should be terminated at the nearest drain. The work shall be done with proper workmanship. (Qty Unit - RM = (Running Meter) | — | — | — | 2,220 | |
| — | 20.00 | — | — | ||
| Supply and fixing of flexible pipe to drain water. The drain pan shall be connected to rigid PVC pipe by braided PVC flexible pipe with appropriate adapters. (Qty Unit - RM = (Running Meter) | — | — | — | 800 | |
| — | 5.00 | — | — | ||
| Supply of split type precision ACs of 2TR capacity, single phase or three phase as per site requirement, with high performance split type cooling units suitable for critical technology / equipment room featuring robust design to run 24x7, Auto-Restart function, monitoring with unit to unit communication and ease of service, complete with indoor and outdoor units, microprocessor based controller and other accessories, as per specifications in Annexure XXIII. | — | — | — | 16,42,280 | |
| — | 100.00 | — | — | ||
| Supply, fixing, testing & commissioning of interconnecting copper piping of size as per OEM's recommendations, min. size 3/8" outer dia. for discharge line & 5/8" outer dia. for suction line, & with insulation, between indoor and outdoor units as per site requirement, complete with hardware fittings, as per specifications in Annexure XXIV. (Qty Unit - RM = (Running Meter) | — | — | — | 2,27,400 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing and commissioning of PVC insulated & sheathed copper cable flexible multi-strand, 1100 Volt grade, FRLS wires, confirming to IS: 694 of 2010 or latest / IEC / NEC / NFPA Standards, ISI marked of reputed make, for remote cabling of precision ACs. The connection shall be made with suitable bi-metallic crimping sockets of proper size & rating. The cable shall be fixed with proper workmanship. Cable size: 1.5 sq.mm., 7 core. (Qty Unit - RM = (Running Meter) | — | — | — | 10,900 | |
| — | 10.00 | — | — | ||
| Fabrication, supply and fixing of M.S. stand for condensing unit (outdoor) / cooling unit (indoor) of precision Acs, as per Annexure XXV. | — | — | — | 1,01,540 | |
| — | 5.00 | — | — | ||
| Installation, testing & commissioning of precision ACs of 2TR capacity complete with indoor and outdoor units and all other accessories, as per specifications in Annexure XXVI. | — | — | — | 61,665 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-April-2022.pdf
ATTACHMENT
GCCCorrectionSlipNo1ofACS-14-07-2022.pdf
ATTACHMENT
GCCApril2022CorrectionslipNo_2RBDtd13122022.pdf
ATTACHMENT
IRSGCC-2022-AdvanceCorrectionSlipNo.3.pdf
ATTACHMENT
GCCApril2022ACSlip4.pdf
ATTACHMENT
GCCApril-2022AdvanceCorrectionSlipNo_5.pdf
ATTACHMENT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_111.pdf Advance Correction Slip No 11
ATTACHMENT
E-PG16.6.26.pdf
ATTACHMENT
AnnexureVclarificationforonlinesubmissiondated14.05.2024.pdf
ATTACHMENT
BidSecurityFormat.pdf
ATTACHMENT
BankGuaranteeFormat.pdf
ATTACHMENT
InsuranceSuretyBondforPerformanceSecurity.pdf
ATTACHMENT
NORETIREDRAILWAYEMPLOYEEGCC2022-Annexure-III.pdf
ATTACHMENT
NoRelativeFormatEmployeeofWesternRailway-Annexure-II.pdf
ATTACHMENT
EL-81-19-113-WA-412026-2027.pdf
ATTACHMENT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_111.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .