REPAIR/REPLACEMENT OF PLASTER, JOINERY, TILING, CHAJJA, FLOORING, SUNKEN TREATMENT, PLUMBING AND ALLIED SERVICES AT SOMNATH ENCLAVE, ARUN KHETARPAL ENCLAVE, EAGLE ENCLAVE AND MD ACCN SARDHANA ROAD UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Amount

Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed

Taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new frame complete all as specified and directed

Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but n.exc 4.0 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats complete all as specified and directed

Taking down and refixing door shutters of any description of area exc 1.0 Sqm but n.exc 2.0 Sqm each in the same opening including easing of door/window/cup board shutters for easy closing/ opening incl tightning of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed Note : Labour for taking down of shutter incl in this item, nothing shall be paid extra.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and as directed

Demolition cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed

Demolition brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed

Demolition cement concrete in sunken portion including floor complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises complete all as specified and directed

Dismantling wall or ceiling board (fibre, pulp, insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

Dismantling snap grid for false celling of any description and size complete all as specified and directed.

Taking down eaves gutter and rain water pipe and size any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 using ready mix plaster bags on brick/concrete surfaces of walls, pillars & columns finished even and fair complete all as specified and directed

M&L for 10mm thick rendering in CM 1:6 on brick/ concrete surfaces of walls finished even and fair complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar 1:3 in chajjas/beam/Ceiling etc with X PM if required to make up to original shape at any height complete all as specified and directed

M&L for 5mm thick rendering in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified and directed

M&L for applying washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including forming/providing groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster in each Sqm area as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

M&L for clean the surface using wire brush, remove existing paint wall putty and remove the entire loose particles from the dampness surfaces of walls and apply Damp guard solution mixed with wall care putty and apply two coats of mixed solution as per manufacturer instruction complete all as specified and directed.

M&L for preparation of old/decorated surfaces of walls and applying two coat of oil bound distemper using roller over complete all as speicified and directed.

M&L for preparation new plastered surface of walls & applying two coats of distemper oil emulsion of approved shade / tint over a coat of 2mm thick wall care putty of approved make complete all as specified and directed by Engineer-In-Charge.

M&L for preparation new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&Lfor preparation old decorated plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

M&L for preparation old decorated plastered surfaces of walls and applying two coat of white wash complete all as specified and directed.

M&L for prepration old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper using roller for painting including a coat of 2mm thick wall putty wherever required complete all as specified and directed.

M&L for prepration old decorated surfaces of walls by washing rubbing down and stooping of distempered and painted surfaces and applying two coat of oil bound distemper using roller for painting including a coat of 2mm thick wall putty complete all as specified and directed.

M&L for preparation old decorated, plastered or pointed surfaces of wall by complete removal of existing treatment and applying two coat of cement based paint over a coat of alkali resistent primer complete all as specified and directed

M&L for preparation old plastered/ decorated surface of walls incl scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc and applying two coats of exterior emulsion paint complete all as specified and directed.

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint. complete all as specified and directed

M&L for prepration of old steel or iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed

Preparation of new wooden surfaces of any description not otherwise described over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F 30mm thick flush shutter solid core construction with block board core & ply wood face panels, commercial type on both faces complete all as specified and directed.

S&F 35m thick IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S Square tube, suppling & fixing in opening all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame at site all as specified and directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F 150 mm long aluminium anodised barrel tower bolts of exturded section complete all as specified and directed

S&F 200 mm long mild steel barrel tower bolt stove enamelled black with bright bolt (ISI marked) complete all as specified & directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised all as specified and directed

S&F 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed .

S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

S&F MS door springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate and fixing in MS frame or wooden frame complete all as specified and directed

S&F 140mm long Floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed.

S&F galvanised steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F for anodised aluminium sliding glazed window with three track / shutter, three shutter sliding with following specification complete all as specified and directed. (i) Window frame of cross section 101 mm x 44mm x 1.5mm thick (ii) Three way track for sliding shutter of cross section 91.8 mm x 31.75mm x 1.1mm thick (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick (iv) 4 mm thick tinded glass supeiror quality (v) IDPE rubber gasket for fixing of glass (vi) Locking cleats per shutter 1 Nos (vii) Sliding rollers per shutter - 02 Nos (viii) Aluminium wire cloth 0.30 mm nominal dia of wire and average width of aperture 1.56 for shutter 1 No (ix) Fixing of screw for frame with wall per window -08 Nos (x) Aluminium grill

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6 cm mean radius built in cement mortar 1:6 complete all as specified and diretced.

M&L for (Except brick) brick work with Sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed. Note:- Old serviceable bricks obtained from Ser item No 07 shall be reused

M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 12mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in Cement Mortar 1:4 as backing coat including rubbing and polishing complete all as specified and directed

M&L for granite(of any type) tiles 16 to 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and making suitable holes for gas pipe complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C-2 (40mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block laid in floor, any shape and size conforming to IS-15658-2006 of 60mm thickness M-40 grade with grey cement & pigment, complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

S&F Anodised aluminium snap grid frame work of size 600mm x 600mm for false ceiling all as specified complete all as specified and directed.

M&L for Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed. Note:- (Frame work for ceiling shall be measured and paid separately)

M&L for dismantling of existing treatment of sunken surfaces and preparation of sunken surfaces by cleaning of and removal of loose concrete and provided PCC (1:7:12) type F-2 using 40 mm graded brick aggregate in, filling and mass concrete as in sunken portion and also ensure that no leakage / seepage after 24 hrs ponding test as in treated sunken areas and filling cracks with polymer modified mortar using and applying 2 coats of WPC in suken areas and laying a protective plaster in 10mm thickness in cement mortar (1:3) admixed with adhesive + @ 220ML per bag of cement applying mix of cement water in the ratio 1:1:5 by volume using copolymer latek liquid chemical on floor and vertical surface of sunken floor as per manufacturers instructions complete all as specified and directed

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) (Light shade) (Double charge) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles incl 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed.

All as per item no 59 above but as in skirting over and including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 450mm x 350mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

S&F in repairs 19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including exposed surfaces finished with external teak wood lipping, 6 mm thick fixed with nails complete all as specified and directed.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open ) 40 mm complete all as specified and directed.

S&F in repairs 40 mm dia brass polished, bright finished cup board knobs fixed with nut screws and washer complete all as specified and directed.

S&F in repairs 100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs Magnetic catches of 50/30mm size for cupboard shutters etc complete all as specified and directed.

S&F in repairs 10/12/14 inches long SS sliding channel for drawer complete all as specified and directed

S&F in repairs for 150 mm long aluminium handles cast type complete all as specified and directed

S&F in repairs 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F in repairs 250mm long mild steel sliding door bolts stove enamelled black ISI marked, with bright bolt not less than 12mm dia with and inc min of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repairs 250mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300 mm long ordinary mild steel rat tail rod pattern springs including roller roller plate complete fixed to wooden/ steel frame complete all as specified and directed

S&F in repairs Floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed.

S&F in repairs powder coated mild steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed .

S&F in repairs stainless steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed .

S&F in repairs MS plain sheet 01 mm thick for making modified lid of water tank and fixed with 04 nuts and bolts to water tanks for water capacity n. exc 1000Ltr & 300Ltr all as specified and directed and sample kept in AGE B/R - II Office all as specified and directed.

S&F in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed

Hacking out old broken glass ( any thickness, size, quality or description ) from metal frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for 4.8mm thick sheet glass, fixed with rubber gasket beading and aluminium channels in aluminium door and windows complete all as specified and directed.

Taking up of or down steel tubing and connections 15 mm bore complete all as specified and directed

Taking up of or down steel tubing and connections 20 mm bore complete all as specified and directed

S&F 15mm bore medium grade GI tubes with all fittings and fixed complete to walls or laid in floor complete all as specified and directed

S&F 20mm bore medium grade GI tubes with all fittings and fixed complete to walls or laid in floor complete all as specified and directed

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 300 ltrs, including 15 mm bore Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including 20 mm bore Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repairs angle valve,15 mm cast copper alloy chromium plated fancy type with long shank &cup(concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete all as specified and directed.

S&F in repairs stop valve,20 mm cast copper alloy chromium plated fancy type with long shank &cup with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 20 mm bore iron fixed complete all as specified and directed.

S&F in repairs cast copper alloy chromium plated bib tap 15 mm fancy type with crutch or butterfly handle screwed down, screwed for iron pipe for for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore two way bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed

S&F in repairs 15 mm dia Pillar taps swan neck wash hand basin mixer chromium plated , screwed down with high pressure with or without lettered 'HOT'or 'COLD' with long screwed shanks and fly nuts complete all as speciied and directed.

S&F in repairs 15mm bore brass chromium plated wall mixer three way telephonic type for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-charge.

S&F in repairs CP 15 mm dia sink cock swan neck fixed with wall end with flange, complete all as speciied and directed.

S&F in repairs 15mm/20mm stainless steel/CP/brass spindle suitable for MAP QTR for Bib cock, stop cock, pillar tap, angle wall wall mixer etc half or full turn of any description complete all as specified and directed

S&F in repairs CP Towel rack with rail and hooks size 18" - 24" S/S complete all as specified and directed.

S&F in repair single towel rail 600 mm long complete all as specified and directed

S & F in repairs CP grating doom 100 mm dia with/without waste hole over floor/Nani trap complete all as specified and directed.

S&F in repairs CP Helth faucet set classic chrome 2 in 1 (with tube and hook) with 1 mtr CP tube & Hook complete all as specified and directed.

S&F in repairs PVC waste pipe 32 mm dia complete all as specified and directed

S&F in repairs PVC waste pipe 40 mm dia complete all as specified and directed

S&F in repairs CP kitchen sink waste coupling of size 40mm complete all as spd and directed.

S&F in repairs CP WHB waste coupling of size 32mm complete all as spd and directed

S&F in repairs sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, overall size 915mm x 460 mm / (36" x 18") bowl size 410mm x 355mm / (16" x 14") and depth 175mm / (7") including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated 32mm bore with long screwed shanks and fly nuts including making holes in brick walls for brackets and fixed in CM (1:3) or PCC 1:2:4 type B0 complete all as specified and directed

S&F in repairs for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 720 x 600 x 230 mm fixed with plugs and washers on wall complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan, 'Pedestal' pattern (EWC) integral foot rest or without foot rest including jet spray, seat cover including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete complete all as specified and directed.

S&F in repairs EWC seat cover with fittings (hinges) complete all as specified and directed.

S&F in repairs Toilet papar holder complete all as specified and directed

S&F in repairs PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed

S&F in repairs PVC connection fiber suitable for HOT WATER, reinforced 600 mm long with brass check nut and PVC washers at both ends complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450mm/600 mm complete all as specified and directed.

M & L for Cleaning of water tanks of capacity exceeding 500 ltr and not exceeding 1000 ltr by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.

S&F in reapirs 20 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specified and directed

S&F in repairs 15 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs for cast copper alloy chromium plated shower rose 125mm with brass arm 225mm with flange complete all as specified and directed.

S&F in reairs corner glass shelf with bracket (suitable for MAP Qtrs) complete all as specified and directed.

S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs for looking mirror SIZE 900 X 600 X 6MM (SUITABLE FOR MAP QTR - AS PER SAMPLE KEPT IN AGE B/R-II OFFICE) complete all as specified and directed.

S&F in repairs acrylic bathroom corner set of 03 complete all as specified and directed.

S&F in repairs Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets waste coupling and waste pipe (oval shape suitable for MAP Qtrs) all as specified and directed

S&F in repairs vitrious china wash hand basin white flat back size 630X450mm including CP 15mm swan neck pillar tap, 32mm CP waste coupling, waste pipe and brackets complete all as specified and directed.

S&F in repairs for brass 2 levers mortice lock verticle type size 100 with two S/S handles and all fixing components complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed.

S&F 75 PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specieid and directed.

S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and direted.

S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs PVC (SWR) junction tee (double Tee) equal or unequal, 110 mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) cowl, 75 mm bore complete all as specified and directed.

S&F in repairs sliding window lock complete all as specified and directed.

AMBEY CONSTRUCTION

vibha associates

B.K.construction

VIRAT CONSTRUCTIONS