Civil Modification Works for Installation of Fire Doors at ICAT Centre 2, Manesar (Haryana)

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone- iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to and above plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand (zone-iii) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for:

Lintels, beams, plinth beams, girders, bressummers and cantilevers.

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-mechanically treated bars of grade fe-500D or more. Make: TATA / Jindal/ Sail or equivalent as per approval of engineer-in-charge in case of non-availability of mentioned makes

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5. Cement mortar 1:6 (1 cement: 6 coarse sand)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Make: Apollo/ Jindal/Sail

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). Make: Asian paints or equivalent products of other brands like Berger / Nerolac/ dulux)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Make: Asian paints or equivalent products of other brands like Berger / Nerolac/ dulux)

Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make: Birla/JK or equivalent.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats. Make: Asian paints or equivalent products of other brands like Berger / Nerolac/ dulux)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Make: Asian paints or equivalent products of other brands like Berger / Nerolac/ dulux)

Cement plaster of mix of 1:4 (1 cement: 4 fine sand) in repairing of plaster of thickness 12 mm to 20 mm, including cutting, scrapping wherever required, raking out joints and preparing and plastering the surface of the walls complete, including matching properly with existing walls/surface including disposal of rubbish to the dumping ground, cleaning of site. All complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) , area in parchesof 2.5 sqm or less. Cement Make: Ultratech/Birla/JK/Bangur

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In cement mortar.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead as per engineer in charge. Area 3 sq. metres and below.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Removing and taking out of motorized rolling shutters including stacking within 50 meter lead as per engineer in charge. (Two shutters

UCCOTECH (BID ID -3211307)