REPAIR/REPLACEMENT TO COMPOUND WALL, HARD STANDING AND FENCING AT CERTAIN PLACES AND PERIODICAL SERVICE TO CERTAIN MD/OTM ACCN OF CERTAIN UNIT UNDER AGE B/R-I, GE RANCHI

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for.

Demolition of cement concrete (re-inforced) of any description and in any position not otherwise specifically provided for.

Demolition of brick work built in cement mortar including all quoins, arches, pillar, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

Dismantling fencing wire mesh any type.

Dismantling posts/pillers or struts (Wood, Steel, or RCC) any section, including taking out embedded portion and making good disturbed ground.

Excavating in post holes (or similar holes) each not exc 0.5 cu.m, getting out, retuning, filling in and ramming earth broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for fdn, etc or for shaft, well, cesspits, manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft/ loose soil.

Returning filling and ramming excavated soils in layers not exceeding 25cm thick each layer including wateringwell ramming etc.

Removing excavated material up to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone as in foundation , filling and mass concrete, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone as in foundation , filling and mass concrete, complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing, complete all as specified and directed.

All as per item No 12 above but 6 mm dia and over upto and including 10 mm dia as in stirrups spacers and binders, complete all as specified and directed.

M&L for RCC (nominal mix) using type B-1 1:2:4 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M&L for RCC (nominal mix) using type B-1 1:2:4 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and directed.

M&L for RCC (nominal mix) using Type B-1 1:2:4 (20mm graded aggregate) as in Beams, cantilevers, bressummers, coping, lintels over 1.5m span, complete all as specified and directed.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

All as per item No 20 above but except bricks.

M&L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished fair & even, complete all as specified and directed.

M&L framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

S&F mild steel framed work as in posts and struts in fencing including cutting tops to shape as directed, drilled holes,notching for wire etcflats iron fillets (for securing wire mesh etc) including all necessary drilling,bolting or fiveing etc, and similar work confirming to Fe-290 GdeE -165.

Supply only 4 mm dia galvanised iron chain link fencing of size 100x100 mm.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.

S&F mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagoanl or sqare nut, n.exc 5cm long of diameter of shanks 11 to 15 mm.

S&F 2 strand barbed wire galvanised, 2.24mm dia barbed 2.00mm dia barbed at 75mm spacing and straing and fixing to any type of standared rails staining bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, stables or steel pins,etc, complete all as specified and directed.

Preparation of new steel surfaces, over 10 cm in width or girth, and two coat of synthetic enamel paint over a coat of red oxide primer.

M&L for two coats of cement based paint over a coat of white wash after preparation of new plastered surface, complete all as specified and directed.

M&L Cement concrete, type D-2, 1:4:8 using (40mm graded stone aggregate) 100 mm thick as in sub base of floors, complete all as specified and directed.

M&L for Sand filling under floors or in foundations etc incl watering and consolidation, complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block of any shape and size confirming to IS 15658-2006 of thickness 60mm, M-35 grade set and jointed with neat grey cement and no pigment etc, complete all as specified and directed.

M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) as bedding layer including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required.

M&L 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes, complete all as specified and directed.

M&L for Chequered cement concrete tiles (20x20x25)mm thick, set, jointed and pointed in neat grey cement slurry in floors, complete all as specified and directed.

M&L for preparation of old decorated surfaces on walls including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash, complete all as specified and directed.

All as per item No 37 but as on celling.

M&L for preparation of old decorated surfaces on walls including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coat of white wash, complete all as specified and directed.

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper of approved colour and shade over 2 mm thick wall putty, complete all as specified and directed.

M&L for preparation of old decorated surfaces on walls and applying one coat of oil bound distemper of approved colour and shade, complete all as specified and directed.

All as per item No 41 but two coats of oil bound distemeper.

All as per item No 41 but as on celling.

M&L for preparation of old decorated surfaces on walls and applying one coat of cement based paint of approved colour and shade, complete all as specified and directed.

All as per item No 44 but two coats of cement based paint

M&L for preparation of old decorated brick, stone, concrete, asbestos or plaster surfaces and applying one coat of weather coat paint of approved colour and shade, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 CM width or girth and applying two coats of synthetic enamel paint of approved colour and shade, complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade, complete all as specified and directed.

Disconnecting 500 Ltrs existing tanks setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position and Cleaning and removing all scales and dirt algae, fungus etc from RCC/PVC water tanks and from mouth of pipes with bleaching powder etc after dewatering/draining water and removing vegetation around the tanks for the following tank capacities including writing with paint the date of cleaning on the tank.

All as per item No 50 but exceeding 500 Liters but not exceeding 1000 Liters.

Dismantling water tank of capacity 500 Ltr and removing to stores

Dismantling water tank of capacity 1000 Ltr and removing to stores

S&F roataional moulded polyethethylene water storage tanks cylindrical vertical with closed top) of 500 ltr capacity hoisted and fixed in position all as specified in SSR Part I.

S&F roataional moulded polyethethylene water storage tanks cylindrical vertical with closed top) of 1000 ltr capacity hoisted and fixed in position all as specified in SSR Part I

Taking up or down 15 mm bore steel tubing & connections, including cleaning for refixing or removal to store.

Taking up or down 20 mm bore steel tubing & connections, including cleaning for refixing or removal to store.

Taking up or down 25 mm bore steel tubing & connections, including cleaning for refixing or removal to store.

S&F medium grade 15mm bore tube galvanised with all fittings and fixed complete to wall and ceiling or laid in floors.

S&F medium grade 20mm bore tube galvanised with all fittings and fixed complete to wall and ceiling or laid in floors.

S&F medium grade 25mm bore tube galvanised with all fittings and fixed complete to wall and ceiling or laid in floors.

Fixing only 15 mm bore tube any grade to walls and ceiling or laying in floors.

Fixing only 20 mm bore tube any grade to walls and ceiling or laying in floors.

Fixing only 25 mm bore tube any grade to walls and ceiling or laying in floors.

S&F 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.

S&F in repair 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.

S&F in repair 25mm Bore gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipes.

Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high

Writing stops, commas, short lines, dashes, hyphens, bracket etc.

M/S mahabirsahu

M/S AMOD KUMAR PANDEY

Rajeev Ranjan

india trading company

M/S JAI MATA DEE CONTRUCTION CO.

Delhi Enterprises

M/s Aditya Narayan Sahu