Repair / Replacement to compound wall, fencing and concertina coil of installation building under the AOR of AGE W/S-II and AGE E/S-II under AGE (I) (U) B/R, Delhi Cantt-10

Amount

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, including taking down roots of trees complete etc. complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of weather proof exterior emulsion paint over priming coat of exterior primer on new or untreated plastered surfaces using brush for priming coat and 1st coat and 2nd coat with airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical Vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour complete all as directed by Engr-in-Charge.

M&L for applying two coats of weather proof exterior emulsion paint using brush for first coat and second/final coat with Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max materials hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and directed by Engr-in-Charge.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1cement : 4coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square meter, top layer 15mm grit plaster using white cement in the top layer with the item of washed marbal stone chipping grit plaster 1:1/2:2 (1 white cement:1/2 coarse sand:2 marbal stone chipps 10mm nominal size) including pigment (colour) to be added as per approved by Engr-in-charge in pannel with groove all around as per approved pattern including scrubbing and washing , the top layer with brushes and water to expose the stone chipping complete all as spd and directed by Engr-in-charge. Note:- Providing groove shall be paid separetly

M & L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as Specified and directed by Engr-in-charge.

S&F concentrina coil fencing wirth punched tape concertina coil 600 mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length , spring core wire ( 2.5mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with existing Y shape Angle iron with 6 horizontal R.B.T ( Reinforced Barbed Tape) wire, stud tied with GI Staple sand GI clips to retain horizontal complete all as specified and directed by Engineer-in-Charge .

Dismantling of Concrete posts or struts (wood,steel or R.C.C.) any section, including taking out embeded portion and making good disturbed ground by leveling ramming to true surface complete all as specified and directed by Engr-in-Charge.

S&F Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc and similar work conforming to FE -290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F in repairs Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc (each line wire to be measured) complete all as specified and directed by Engr-in-Charge.

Dismantling chain link fencing including line wires, any mesh size and type of standard (weight n. exc 4.00 kg /sqm) straining bolts fixed with steel or concrete post etc complete all as specified and directed by Engr-in-Charge.

Supply only chain link MS galvanised fencing any size or type (weight not exc 4 kgs/sqm) complete all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing including line wire mesh, any size and type to standered , rail, straining bolts, including provision of binding wire complete all as specified and directed by Engr-in-Charge.

Excavating in post post holes (or similar holes) in each n.ex 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed by Engr-in-Charge.

M&L in cement concrete type C-2 1:3:6 (40mm graded aggregate)as in post hole, foundation filling in mass concrete complete all as specified and directed by Engr-in-Charge.

Demolition of reinforcement concrete work of any description and in any position not other wise provided for complete all as specified and directed by Engr-in-Charge.

Dismantling of brick work built in cement mortar including all quions arches , pillar etc but excluding ashalar facing dressed stone and pre-cast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L for brick work using sub class 'B' brick old size in cm (1:6) straight or curved on plan exceeding 6.00 mtr mean radius , complete all as specified and directed by Engr-in-Charge.

All as per above item No. 19 but except bricks complete all as specified and directed by Engr-in-Charge.

Removing mortar from and cleaning bricks stacking for measurement including all extra handling and removal and disposing off rubbish in cement or cement lime mortar complete all as specified and directed by Engr-in-Charge.

M&L for RCC M-25 (Design Mix) as in foundation, incl raft, footings foundation beams, plinth beams, bases for columns etc using 20mm graded stone aggregates complete all as specified and directed by Engr-in-Charge.

M&L for RCC M-25 (Design Mix) as in columns etc using 20mm graded stone aggregates complete all as specified and directed by Engr-in-Charge.

M&L for RCC M-25 (Design Mix) as in beams, cantilevers, bressummers, lintels over 1.50m span using 20mm graded stone aggregates complete all as specified and directed by Engr-in-Charge.

Form work to sides of concrete surface rough finished flat in foundations, footings, sides and sofits (if any) of foundations & plinths beams and similar wk etc complete all as specified and directed by Engr-in-Charge.

Form wk to side of concrete surface rough finished square, rectangular or polygonal as in columns, pillars, posts, struts, and similar work complete all as specified and directed by Engr-in-Charge.

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, coping, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces complete all as specified and directed by Engr-in-Charge. .

M&L for 15 to 20 mm thick Granite (of any type) tiles machine cut not less than 0.38 sqm each tile , in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 15mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade / colour / matrix of the tiles complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soil n.exc 1.5 m wide and n.exc 1.50m in depth for foundation, pier holes etc exc 10 sqm on plan and getting out complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed by Engr-in-Charge. .

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.50 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded aggregate in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

All as per item Ser No 33 above, but 5mm dia and over upto 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge.

Dismantling structural steel work in cluding doors, gate, grills etc but excluding framed trusses etc complete all as specified and directed by Engr-in-Charge.

S&F framed work such as grills, grating, steel ladders , iron gate and doors hung as gates including pintle hinges, stops, hand made sliding bolt, handles etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Taking down and re-fixing in the same opening including edging, rising or lowering and erecting in true position of framed work such as grills, grating, iron gate and doors hung as gates including pintle hinges, stops, hand made sliding bolt, handles etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of scaled paint and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M/S GR construction compony (BID ID -3395929)

Rohan Construction Company (BID ID -3396626)

D K Engineers and contractors (BID ID -3399711)

HARICHAND CONSTRUCTION (BID ID -3397052)

Dhirendra Singh & Sons (BID ID -3396774)

Lamba Enterprises (BID ID -3399871)