ADDN/ALTN TO LIVING-IN BILLET FOR AGNIVEERVAYU (WOMEN) AND PROVISION OF EXTERNAL SERVICES AT SPORT COMPLEX IN ADM AREA AT AF STATION GWALIOR

Amount

M& L for site clearance in soft /loose soil complete all as specified and directed.

Excavating in trenches in soft /Loose Soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, and laying of cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M& L for PCC 1:4:8 Type D2 (40 mm graded agg) in foundations, filling, mass concrete and sub base of floor complete all as specified and directed.

M&L for Sand filling under floor including watering and consolidation complete all as specified and directed.

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed .

M&L for Returning, filling in soft/Loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated Soils to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M& L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed

M& L for reinforced cement concrete Nominal Mix type B1 1:2:4 ( 20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M& L for reinforced cement concrete nominal mix type B1 1:2:4 ( 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M& L for re-inforced cement concrete nominal mix type B1 1:2:4 ( 20 mm graded aggregate) as in chajja and similar work complete all as specified and directed.

M& L for re-inforced cement concrete type B1 1:2:4 ( 20 mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M& L for re-inforced cement concrete type Nominal Mix B1 1:2:4 ( 20 mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat surface and fair finished surface complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) and fair finished complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc and surface fair finished complete all as specified and directed.

M& L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions Square rectangular on plan complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (Fe-410-W 432 (Part I) (Gde.E-250) complete all as specified and directed.

All as per item No 22 above but 6mm to 8mm dia TMT bar complete all as specified and directed.

M&L preparation of old surfaces of wall and applying two coats of premium acrylic emulsion paint of approved colour with silicon additive & colour stay technology, excellent dirt pick up resistance with VOC less than 50Gram/Litre as per LEEDS specifications having anti algal properties in two coats @1.79 litre (Undiluted)/10 Sqm diluted with water as per manufacturers instructions applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI complete all as specified and directed. Note : Subsequent coat of painting shall be done after allowed 6 to 8 hrs to dry the painted surface.

M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for preparation of primer surfaces of wall and applying two coats of water based premium acrylic emulsion paint of approved colour with silicon additive & colour stay technology, excellent dirt pick up resistance with VOC less than 50Gram/Litre as per LEEDS specifications having anti algal properties in two coats @1.79 litre (Undiluted)/10 Sqm diluted with water as per manufacturers instructions applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI complete all as specified and directed. Note : Subsequent coat of painting shall be done after allowed 6 to 8 hrs to dry the painted surface.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coats of oil emulsion distemper (OBD) of approved shade complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) 450x350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4, complete all as specified and directed.

M& L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6. Complete all as specified and directed

All as per item No 32 above but for vertical surfaces of wall and skiriting including 10 mm thick screed bed in CM 1:4, complete all as specified and directed.

S& F Powder coated Anodised aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S& F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S& F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F 100 mm Mortice lock Aluminium 2 lever vertical type, complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

M& L for 5.50 mm Sheet glass, ordinary quality fixed in Aluminium window/door/ventilator shutter complete all as specified and directed.

S&F in galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window, completed all as specified and directed.

S&F 12 mm thick Pre laminated exterior grade both side laminated board fixed in aluminium sections and all as specified and directed

M& L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm screed bed in cement mortar 1:4 complete all as specified and directed.

S& F 15 mm bore medium grade galvanised steel tubing laid in trenches including all fittings complete all as specified and directed.

S& F 20 mm bore medium grade galvanised steel tubing laid in trenches including all fittings complete all as specified and directed.

S&F fancy type decorated Stainless Steel curtain hanging rods 20 mm dia, and fixed to stainless steel bracket for hanging curtain complete all as specified and directed.

S&F Stainless Steel brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed.

S & F Stainless Steel bright color decorative corner/end cap for Curtain rod complete all as specified and directed.

S&F stainless steel peg set of six with base plate and fixed to wall/door with rawal pugs/ s/s screw all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S& F 110 mm PVC (SWR) bends any radius complete all as specified and directed

S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S&F PVC connection of 15mm bore, 450 mm long with brass coupling on both ends of superior quality complete all as specified and directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete, all as specified and directed.

S&F in repair brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type complete all as specified and directed.

S&F in repair CP soap dish fancy type etc fixed on wall surfaces etc complete all as specified and directed.

S&F, in repair, 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed complete all as specified and directed.

S&F in repair 20 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410W(GdeE-250) qualityB and all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof overing/cladding towall, fixed with selftapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S& F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and size of grid 605 x 605mm complete all as specified and directed.

S&F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screw complete all as specified and directed.

M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and as directed.

M& L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for 50 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in floor finishe laid in alternate panels, finished even and smooth without using extra cement complete all as specified and directed.

M& L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains of 150mm dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching ,kersbs compelet all as specified and directed

M&L for precast RCC 1:1.5:3 type A 1 as in cover slab for manhole/ drains etc with plane faces complete all as specified and directed.

Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M& L for Hard core, broken stone/boulders to gauge n exc 63 mm thick complete all as specified and directed.

M&L 60mm thick rubber moulded glossy finished inter locking paver block of machine pressed precast , M 35 grade with grey cement and pigment of any type and shape the minimum compressive strength not less then 350 kg/sqcm as approved complete all as specified . complete all as specified and directed.

M& L for providing cement concrete Type B0 1:2:4 (12.5 mm graded stone agg) as in in lintels upto 1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height complete all as specified and directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Removing of surplus excavated earth to a distance exceeding exc 250m but n exc 500m and deposited where directed at a level no exc 1.5m above the starting point complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in CM 1:4 complete all as specified and directed.

M&L, cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in bed block/coping including necessary formwork (straight or curved) weathered slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L, rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 mixed with water proofing compound surface finished even and smooth w/o using extra cement complete all as specified and directed. Note:- Water proofing compound will be measured and paid separately)

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for Reinforced concrete pipes 150mm dia, class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in bedding to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested complete for 150 mm bore complete all as specified and directed..

M&L, cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finish to drains or channels 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded aggregate) as in shelves, cover slabs for manholes/drains etc set in cement mortar (1:6) including necessary form work etc complete all as specified and directed. Note : Reinforcement shall be measured and paid separately under appropriate item of Sch ‘A’

Description same as per Srl item No 90 above but, point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board with using 2.5 Sqmm (nominal area) single core 1100 volts grade FRLSH PVC insulated unsheathed multistranded copper conductor and 2.5 Sqmm (nominal area) single core 1100 volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as in earth wire connected to common earth dolly complete all as specified and directed.

Description same as per Srl item No 90 above but, point wiring for one six pin switch socket outlet combination, 15 Amps & 5 Amp (independent) with using 2.5 Sqmm (nominal area) single core 1100 volts grade FRLSH PVC insulated unsheathed multistranded copper conductor and 2.5 Sqmm (nominal area) single core 1100 volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as in earth wire connected to common earth dolly complete all as specified and directed. Note for Item ser No 90 :- (a)For Lights points one circuit maximum 08 points. Note for Item ser No 91 & 92 :- (a)For Socket outlet Ind 6 Amps ( One circuit with maximum 4 points). (b) For Socket outlet 16 Amps ( One circuit of one point only)

M & L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as specified and directed.

S&F switch socket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and directed.

S&F switch socket combination multi purpose, 6 Pin 6/16 amps, flush typeWith Indicator complete all as specified and directed.

M&L for ceiling rose surface Bakelite three terminal, 18 x 50 mm complete all as specified and directed.

Supply & Fixing Bedside Wall light/ Reading Light, Grey 2 watt LED Modern energy efficient Aluminium body material and complete fixing arrangement for fixing the light fitting to wall complete all as specified and directed. Model No PHILIPS 919215850141 2W of Philips or equivalent in Bajaj/Havells/Crompton Greaves.

Supply & Fix for decorative slim linear LED tube light fitting 01x20 watt light with co extruded aluminium body, environmental frendly, energy efficient ready to use pack with all accessories including 01 No 20 watt tube rod and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified and directed.

Supply and fixing Street/Security light fittings 1X30W new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washers complete all as specified and directed.

Supply and fixing wall mounted fan of 400 mm swing 100% copper motor , smooth oscillation , 3 speed control , 120 ribs guard , colour white with complete clamp,nut-bolt, fastners and washers , fixing arrangements to the wall complete all as specified and directed.

Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires complete all as specified and directed.

S&F MCB single pole 6 to 32 Amps, 'B' series10 KA ,240 Volts complete all as specified and directed.

S&F MCB Single pole and neutral 40 to 63 Amps, 'B' Series 240 Volts complete all as specified and directed.

M&L for surface/concealed sub main wiring as required with two single core FR PVC insulated and unsheathed copper stranded conductor of size 4 Sqmm 1100 Volts and one run of copper stranded conductor of size 4 Sqmm for continuous earthing drawn in rigid non metallic PVC conduit pipe ISI marked of size not less than 20 mm dia including to connect their incoming/outgoing electric connections by using required sizes of lugs/thimbles as well as flexible conduit of suitable sizes shall also be used at any open surfaces of conductor complete all as specified and directed. Note :- 1. Note Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. 2. PVC conduit pipe and PVC fittings will be measured and paid separately in respective items.

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers all as required complete all as specified and directed.

Supply & Fixing ceilling fans copper motor complete with blades,downrod, electronic regulator and accessories ,230 V ,1200mm Sweep Min air delivery 210 CEM with service value 6.00 BEE .Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply, Install, Testing and Commissioning of ‘SOLAR WATER SYSTEM' (Evacuated Tube Collector) based on direct transferring of heat of capacity 200 LPD complete all as specified and directed.

S&F GI Medium Grade Hot water Pipe duly insulated with and including glass wool and aluminium cladding 20mm bore complete including all fitting & fixtures all as specified and directed.

S&F GI Medium Grade Hot water Pipe duly insulated with and including glass wool and aluminium cladding 15mm bore complete including all fitting & fixtures complete all as specified and directed..

S&F GI Medium Grade Hot water Pipe duly insulated with and including glass wool and aluminium cladding 25mm bore complete including all fitting & fixtures complete all as specified and directed..

S&F Stop valves/Gate valves 20 mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed.

S&F bib cock, cast copper alloy , CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks of capacity 1000 Ltrs (cylindrical vertical with closed top ) hoisted and fixed in position including PCC (1:2:4)/CM(1:3) complete civil work required for fixing of tank complete all as specified and directed.

Supply , laying , connecting and testing LT 1100 volt grade electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip armoured (heavy duty) ISI marked with aluminium stranded conductor gross sectional area 25 Sqmm , 4 core in trenches/on surface of wall/ in GI pipe including dressing and clamping the cable with MS Zinc Passivated clamps and fixing suitable thimbles/lugs including cable glands of suitable size complete all as specified in PS and directed. Note:- Earthwork & excavation shall be measured & paid separetely under respective items.

Supply , laying , connecting and testing water pipe galavanized " Medium grade" 20 mm dia including all fittings laid in trenches/floor/fixed to wall complete all as specified and directed. Note:- Earthwork & excavation shall be measured & paid separetely under respective items.

S&F MCCB 63 Amps 3 Pole, 16 KA, ICs=ICu, 415 V, 50 Hz with thermal setting between 80% to 100% adjustable type and connecting up in the existing panel location complete all as specified and as directed.

Demolition for cement concrete/road in ground floor and paving n. exc 15 cm thickness below or above ground level including removal of rubbish to a distance exc 50 mtr etc complete all as specified and as directed.

M&L bricks for cover underground cable with one layer of bricks using sub class 'B' bricks (Old size) laid flat across the cable complete all as specified and as directed. Note:- Excavation and earth work will be measured separately).

Supply & Fix 40 mm bore light grade galvanized iron tubing ISI marked including all fittings etc laid in trenches or fixed on wall protection pipe complete all as specified and directed.

M& L for Gun-metal, globe or gate valves, with iron wheel head, 20 mm dia screwed both ends for iron pipe and fixed etc all complete fittings all as specified and direcetd.

RADHA MADHAV CONSTRUCTIONS (BID ID -3496391)

Sunil Traders (BID ID -3490164)

M/s Shubham Construction Co. (BID ID -3496518)

M/S Amit Traders (BID ID -3490494)