Periodical Services of AVNLIOLAM hostel and Institute Bldg

Amount

Periodical Services of AVNLIOLAM hostel and Institute Bldg.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. (wherever required)

Rendering 10 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces on wall. Setting coat 3mm thick cement plaster 1:2 , trowelled to even and smooth finish on wall (wherever required)as directed by EIC.

Rendering 10 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces on wall. Setting coat 3mm thick cement plaster 1:2, trowelled to even and smooth finish on ceiling (wherever required) as directed by EIC

M&L for distempering in two coat on Wall including following procedure: (i) Preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.,it shall be ensured that the surface to be painted must be free from any loose paint, dust or grease. Any previous growth of fungus, algae or moss shall be removed thoroughly by vigrours wire brushing and cleaning with water. Surface imperfection such as holes, removal of nails,dents fine cracks should be filled with wall putty. (Make: JK/ Birla White Wall Putty or better specification as per direction of E.I.C.) [The surface such prepared shall be shown to SIC & EIC for inspection before application of Primer] (ii) Apply coat of primer by thining 1 liter ogf primer (Make: 1st quality Asian Paints / Nerolac Paints wall primer or better specification as per direction of E.I.C.) with 1 liter of water and allow the primer coat to dry for 4 hours. Sand the surface with emery paper No.320 and wipe clean. [The surface after application of Primer shall be shown to SIC & EIC before application of of Distemper] (iii) Applying two coat of Acrylic distemper (Make: Asian Paints Tractor Acrylic Distepmer / Nerolac Paints Beauty Acrylic Distemper or better specification as per direction of E.I.C.) as per manufacturer's specification. The application shall be done by using roller and use of brush allowed only where roller can't be used. Stir the paint well before use. Painting by hand spray etc is not permitted, upto 18m height including necessary scaffolding, staging and all safety equipments, including complete cleaning of site etc. all compete as directed by EIC (Note : The contractor shall note & shall strictly adhere to the Points given below for Work Procedure and Materials to be incorporated in the work, befire quoting for the Item. It shall be presumed that Contractor has clearly understood the Specification both for materials & Work procedure and shall carry out the work at quoted rates strictly adhering to the Specification both for materials & work procedure)

M&L for distempering in two coat on Ceiling including following procedure: (i) Complete removal of existing treatment shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.,it shall be ensured that the surface to be painted must be free from any loose paint, dust or grease. Any previous growth of fungus, algae or moss shall be removed thoroughly by vigrours wire brushing and cleaning with water. Surface imperfection such as holes, removal of nails,dents fine cracks should be filled with wall putty. (Make: JK/ Birla White Wall Putty or better specification as per direction of E.I.C.) [The surface such prepared shall be shown to SIC & EIC for inspection before application of Primer] (ii) Apply coat of primer by thining 1 liter ogf primer (Make: 1st quality Asian Paints / Nerolac Paints wall primer or better specification as per direction of E.I.C.) with 1 liter of water and allow the primer coat to dry for 4 hours. Sand the surface with emery paper No.320 and wipe clean. [The surface after application of Primer shall be shown to SIC & EIC before application of of Distemper] (iii) Applying two coat of Acrylic distemper (Make: Asian Paints Tractor Acrylic Distepmer / Nerolac Paints Beauty Acrylic Distemper or better specification as per direction of E.I.C.) as per manufacturer's specification. The application shall be done by using brush / roller. Stir the paint well before use. Painting by hand spray etc is not permitted, upto 18m height including necessary scaffolding, staging and all safety equipments, including complete cleaning of site etc. all compete as directed by EIC (Note : The contractor shall note & shall strictly adhere to the Points given below for Work Procedure and Materials to be incorporated in the work, befire quoting for the Item. It shall be presumed that Contractor has clearly understood the Specification both for materials & Work procedure and shall carry out the work at quoted rates strictly adhering to the Specification both for materials & work procedure)

M&L for distempering in two coat on Ceiling including following procedure: (i) Preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.,it shall be ensured that the surface to be painted must be free from any loose paint, dust or grease. Any previous growth of fungus, algae or moss shall be removed thoroughly by vigrours wire brushing and cleaning with water. Surface imperfection such as holes, removal of nails,dents fine cracks should be filled with wall putty. (Make: JK/ Birla White Wall Putty or better specification as per direction of E.I.C.) [The surface such prepared shall be shown to SIC & EIC for inspection before application of Primer] (ii) Apply coat of primer by thining 1 liter ogf primer (Make: 1st quality Asian Paints / Nerolac Paints wall primer or better specification as per direction of E.I.C.) with 1 liter of water and allow the primer coat to dry for 4 hours. Sand the surface with emery paper No.320 and wipe clean. [The surface after application of Primer shall be shown to SIC & EIC before application of of Distemper] (iii) Applying two coat of Acrylic distemper (Make: Asian Paints Tractor Acrylic Distepmer / Nerolac Paints Beauty Acrylic Distemper or better specification as per direction of E.I.C.) as per manufacturer's specification. The application shall be done by using brush / roller. Stir the paint well before use. Painting by hand spray etc is not permitted, upto 18m height including necessary scaffolding, staging and all safety equipments, including complete cleaning of site etc. all compete as directed by EIC (Note : The contractor shall note & shall strictly adhere to the Points given below for Work Procedure and Materials to be incorporated in the work, befire quoting for the Item. It shall be presumed that Contractor has clearly understood the Specification both for materials & Work procedure and shall carry out the work at quoted rates strictly adhering to the Specification both for materials & work procedure)

M & L for External wall painting in Two coat with following procedure: i) Preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots., it shall be ensured that the surface to be painted must be free from any loose paint,dust or grease. Any previous growth of fungus, algae or moss should be removed throughly by vigorous wire brushing and cleaning with water. Surface imperfection such as holes, dents fine crack should be filled with exterior wall putty (Make: Asian/Nerolac or better specification as per direction of E.I.C.) or mixture of white cement and fine sand in proportion 1:3. [The surface such prepared shall be shown to SIC & EIC for inspection before application of primer] ii) Appling coat of Exterior Wall Primer (Make: Asian/Nerolac or better specification as per direction of E.I.C.) by thinning 1 liter of primer with 1 liter of water. Allow the primer coat to dry 4 hours.[The surface after application of Primer shall be shown to SIC & EIC before application of Ist coat of Exterior Emulison] iii) Applying two coat of cement paint, (Make: Apex Weather Proof Exterior paint from Asian Paints/Excel Total acrylic Exterior from Nerolac paints or better specification as per direction of E.I.C.) by diluting 1 liter paint with 400ml of water. A gap of 4-6 hours should be given between two coats. Painting by hard spray is not permitted etc upto 18m height including necessary scaffolding, staging and all safety equipment, including complete cleaning of site etc. all complete as directed by EIC. [The surface after application of Ist coat shall be shown to SIC & EIC before application of 2nd coat of Cement Paint Subsequently the surface after application of 2nd coat shall be shown to SIC & EIC for final inspection.] (Note : The contractor shall note & shall strictly adhere to the Points given below for Work Procedure and Materials to be incorporated in the work, before quoting for the Item. It shall be presumed that Contractor has clearly understood the Specification both for materials & Work procedure and shall carry out the work at quoted rates strictly adhering to the Specification both for materials & work procedure)

Preparation of old wood work surfaces, priming with pink primer and applying synthetic enamel painting (1 coat)(Make: Asian/Nerolac or better specification as per direction of E.I.C.) As per directive and of SIC & EIC.

Preparation of old steel work surfaces, priming with red oxide zinc crome primer and applying synthetic enamel painting (1 coat) As per directive and of SIC & EIC.

Preparation old painted surfaces (dado), priming paint plaster and applying synthetic enamel painting (1 coat) As per directive and of SIC & EIC.

GOLDEN CONSTRUCTION

M/s R R ELECTRICALS

RAHUL ENTERPRISES