ADDN/ ALTN AND IMPROVEMENT TO BATHROOM TOILETS AND SANITARY FITTINGS OF BLDG NO. P-74 AT NAUSENA BAUGH AT INS MANDOI UNDER AGE (I) MANDOVI

Amount

Demolition of cement concrete of any description in any position not otherwise specifically provided for

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling

M & L precast cement concrete solid Block Masonary in PCC 1:3:6 type C1 using 20 mm graded trap aggregate ex10 cm width and setting in CM 1:6

Dismantling Floor,hearth or wall tiling including cement mortar Bedding, removing serviceable tiles to stores and removing debris to a distance exc 250 m and not exc 1000 m spread and levelled

M&L Screed bed or bedding layer of cement mortar 20mm thick for laying floor finishes in CM 1:6.

M&L non skid coloured ceramic tiles 300x 300 x 7mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L for rendering 10mm thick in CM 1:4 for backing coat to fix tiles

Glazed ceramic coloured tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Taking down cement plaster of stone /Pcc block /brick wall / top of chajja, or concrete surface of any description including raking out joints hacking for key securing down with water etc and removalof debris to outside of INS Mandovi Area including filling of open joints in cement mortar 1:6 Complete

M & L for 5 mm thick plastering in cement mortar 1:3 finished even & smooth, without using extra cement on ceiling

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brickwork or concrete surface finished even & smooth without using extra cement

M & L for 15 mm thick (10+5) rendering in cement mortar 1:4 on on fair faces of brickwork or concrete surface in two layers i.e first layer 10 mm thick and 5 mm thick outer layer mixed with WPC as per manufacturer instruction and finished surface even and smooth without using extra cement complete all as specified and directed Note - WPC shall be measured and paid separately

Supply only WPC

M&L for preparation of newly plastered surfaces preparatory to distempering, priming plastered with alkali resistant priming paint, 1mm thick wall care putty & distempering walls with two coats of distemper oil emulsion, white or tinted

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash

M&L for preparing old plastered surfaces of ceiling and applying one coats of white wash

M&L for Preparing new plastered or unplastered surfaces of walls applying two coats of 100%Anti fungal acrylic emlusion exterior grade paint (make- asian/Berger/Nerolac/Dulux)over a coat of acrylic primer in approved shade and as per manufacture instruction including necessary scaffolding etc complete and directed by Enggineer-in-Chargre on newly plastered surfaces incl prepration of surfaces on external surfaces (wall facia cornices etc)by applying ready mix Birla whirte white cement based wall care putty (where required) over incl

M & L for complete removal of any existing treatment by scrapping/rubbing & finally washing down with water and freeing the suface from all loose dirt , chalk grease , fungi , algea , flakes etc and making suitable for Apex painting on external surfaces ( wall facia cornices etc) and applying two coat of 100 % anti fungus acrylic emulsion exterior grade paint (white & blue) (make Asian /Berger/ Nerolac/ Dulux) over a coat of acrylic primer in approved shade and as per manufactures instruction & including necessary scaffolding etc complete and directed by Engineer-in-charge

Taking down chowkats with shutters (without taking off shutters from the frames) not exc. 1.5 sq m each

Taking down chowkats with shutters (without taking off shutters from the frames) exc. 1.5 sq m but n exc 4 Sqm each.

S/F 100mm X 63 mm size factory made FRP door frame , frame fixed with 3.Nos on either side with MS flat iron 25mmx3mm cut to size & made to shape & fixed as in hold fast after necessary tarring & sanding & fixed as per manu facture instructions & as directed. Thickness of FRP lamination shall be 2mm. Core shall be polyurethane foam/high density (more than 40kg per cubic meter) cellular foam done in situ. Sscond class wooden blocks shall be provided to hold the fittings .The size of the chowkats shall be inclusive of 2mm thick FRP lamination. Make.Delux/Omega

S/F factory made paneled FRP door shutter , 30 mm thick with 2 mm FRP lamination top rail of size 30 x 150 mm , lock rail & bottom rail of size 30 x 150 mm with 12 mm thick panels of FRP section of box type construction as per IS 4020 core shall be polyurethane foam / high density ( more than 40 Kg per cubic meter ) cellurar foam done in situ & fixed in position as per manufacturer.

Taking down and refixing in the same opening and Resecuring or easing and adjusting without taking down shutters of any description exceeding 1 sqm but n exc 2 Sqm each leaf

S&F Extruded aluminium alloy handles, fabricated type, anodized. 200 mm long in size.

S&F for stainless steel hinge, size 100 mm

S & F floor door stopper 150mm long of aluminium alloy body and fixed to door shutter.

S&F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt or extruded section or cast aluminum alloy and fixed 300mm size

S&F Aliuminium , anodized barrel tower bolt of extruded section & fixed 200mm long in size.

Taking down steel tubing and connections 15 mm bore

Taking down steel tubing and connections 20 mm bore

S & F of CPVC 20mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F of CPVC 25mm pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F Stop valve of cast coper alloy fancy high pressure screwed for iron pipe and fixed fixed in repair in dia 15 mm pipe

S & F Bib tap standard of cast coper alloy fancy high pressure screwed for iron pipe and fixed. 15 mm bore pipe fixed in repair

S & F Two way Bib taps,fancy type chromium type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs15 mm bore pipe(Make : Hindware/Jaquar/Cera/Equivalant)

S&F 2 in 1 Health Faucet with Hook (Chrome Plated) 1.5 Mtr Tube Make : Skathi/Parayag/Polytuff

S&F in repairs Swivel shower of PTMTany colour for fixing with 15mm pipe. (Minimum weight 40gms) & Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms (Make : Prayag/Jaquar/Cera/Equivalant)

S&F Chromium plated soap dish approximate size 160 x 160 x 90 mm embedded in wall fixed in repair

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

Disconnecting existing tanks exc 250 litres & n exc 500 litres capacity ,setting aside Cleaning and removing all scales and dirt etc from mouths of circulating pipes etc hoisting if requried connecting and refixing in position

Dismantling of water tanks exc 250 litres & n exc 500 litres capacity ,and removing to store complete all as specified and directed by engr in charge.

S&F 500 Litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by engr in charge.

S&F Ball valves 25mm bore dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipeand fixed in repairs . (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms)

S&F 25 mm bore CPVC BALL VALVE

S&F 25 mm CPVC Tank Adaptor

S&F 20 mm bore CPVC BALL VALVE

S&F 20 mm CPVC Tank Adaptor

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) ( excluding flushing cistern and flush pipe ) fixed in repairs

Supply 10 litres Capacity PVC valveless,syphonic action type,flushing cistern,low level,white with inlet,ball valve,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing only in repair of High or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any

Supply of Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) & fixing of Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F Wash basins, Vitreous China (flat back or angle back type) 550mmx400mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipefixed in repairs & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

S & F PVC Connection of size 15 mm ,450 mm long with PTMT nuts complete all as specified

S&F 32mm x 800mm long PVC Waste Pipe

S&F Pillar taps of cast copper alloy high pressure screwed for iron pipe and fixed in repairs.15mm bore dia

Demolition and breaking up of 100mm drain pipes (Salt glazed ware/AC/PVC) set in cement mortar

Demolition and breaking up of 75mm drain pipes (Salt glazed ware/AC/PVC) set in cement mortar

S & F PVC (SWR) pipes 75 mm bore single sockeyed in any length with rubber rings joints laid in trenches or in floors

S & F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber rings joints laid in trenches or in floors

S&F 75 mm Ø PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 110 mm Ø PVC (SWR) pipe with single socketed in any length solvent cement jointed fixed to wall/column

M&L for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in repairs

S& F PVC (SWR) bends any radius 110 mm bore

S& F PVC (SWR) bends any radius 75 mm bore

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm bore

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore

S&F PVC (SWR) junction single, (Single T) equal or unequal 110mm bore with acess door

S&F PVC (SWR) junction single, (Single T) equal or unequal 75mm bore with acess door

S&F PVC (SWR) vent cowl 75mm dia

S&F PVC (SWR) vent cowl 110mm dia

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F aluminum powder coated door/window/ventilator shutter including frame , any type (sliding/open-able/louver ) with frame , & other similar work etc fabricated by using the JINDAL / CENTURY section including necessary arrangement to receive 4mm thick sheet glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket / rubber beading etc complete . But the weight of the rubber gasket / beading will not be measured with weight of aluminium shutter Note :- Sheet glass & wire mesh shall be measured & paid separately

Supply and fix aluminium powder coated grill, 7.5 mm thick

S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S & F aluminium powder coated louvers of 4 handle/blades to fitted in aluminium ventilator of size 0.6m x 0.45m

M & L for 15 mm thick Rendering in CM 1:3 on fair faces of brick work or concrete surfaces with liquid WPC as per manufacturer instruction complete all as specified and directed Note - WPC wiil not be measured and paid separately

M&L 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate)

M&L Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces

M&L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)

Drilling hole 20mm dia in floor/wall upto 300mm long and fixing 20mm dia CPVC pipe 600mm long , grouting with water proofing compound of approved manufacturer mixed with cement as per manufacturer instructions by injection pressure gruoting to prevent the leakages from sunken floor (effective area of one hole shall not be less than 1 sqm on plan) & making good the hole to match the surface with colour cement all as directed by Engr in charge. Note :- The contractor has to carryout one more drilling if earlier grouting is not carried out effectively/to the satisfaction of AGE (I), at his own cost.

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete (fittings such as switches, ceiling roses pendants, regulator,sockets Light fittings and fixtures, etc and making good the disturbed surfaces of walls, floors etc as per existing .

M&L for one light point or fan point controlled by one switch with cables 1.5 sqmm copper cable multistranded unsheathed in concealed PVC conduit including and 1.5 sqmm cable conductor for earth wire including making connection with common earth and earth dolly including pressed steel terminal al boxes concealed in wall with 3 mm thick Hylem sheet or plastic masonite laminated sheet top cover fixed with brass screw for mounting switches sockets regulator including making the disturbed surface good by plastering and painting of matching colour etc all as per directed by Engr-in-Charge. Make : Plaza, /Finolex/Havells

All as per item No 82 above but 5 Amps switch socket combination on indipendent board Make-Plaza, /Finolex/Havells

All as per item No 82 above but one 6 pin socket outlet 15 Amps independent/metal plug and socket with cables 2.5 sqmm size copper cable multistranded Make :Plaza, /Finolex/Havells

Supply & Fix switch piano flush button single pole one way 5 Amps make Anchor cat No-38069 or equivalent in Plaza/MDS.

Supply & Fix switch socket combination 2 in 1, 6 pin and 5 Amps flush type make:Anchor CAT NO-14616 or equivalent in MDS/Plaza.

Supply & Fix switch socket combination 2 in 1, 6 pin and 15 Amps flush type make:Anchor CAT NO-14616 or equivalent in MDS/Plaza.

Taking down MCB, MCB DB/cut out/main switch /metal plug and socket of any size

Supply & Fix sheet metal enclosure for MCB's (D.B) 8 way (SPN) with 200 Amps rated bus bar double door make. Schneider cat No- MGNSPNDD04 or equivalent in L&T/Legrand

Supply & Fix ceiling rose, surface Bakelite 65x50 mm Two to three terminals. Make : Anchor CAT NO-39040 or equivalent in L&T/Plaza.

S&F LED tube light fitting 1x20 W 4 ft baton intergrated channel intergral sleek extruded polycarbonate LED channel with white acrylic cover including LED tube rod cool white on the same location, all accessories prewired including 1 No LED LED tube fixed over square block of PVC in any position and making necessary electrical connectioin and testing complete all as directed by Engr-in-Charge Make Luker/Bajaj/Havels

S&F LED tube light fitting 1x9w 2 ft baton intergrated channel intergral sleek extruded polycarbonate LED channel with white acrylic cover including LED tube rod cool white on the same location, all accessories prewired including 1 No LED LED tube fixed over square block of PVC in any position and making necessary electrical connectioin and testing complete all as directed by Engr-in-Charge. Make Luker/Bajaj/Havels

M & L for Submain wiring including taking down old sub main wiring with 2.5 sqmm 2 Runs of single core multi stranded PVC in related unsheathed cable 1100 Volts with copper conductor drawn in PVC casing and caping with all accessories such as tees, elbows, junction box Reducers etc as required along with 1 Run of 2.5sqmm single core PVC insulated unsheathed copper conductor as continuous earth wire and connecting to Existing main switch board \ Distribution Board and testing on completion including Taking down old submain wiring and type of conduct complete all as directed. Make: Plaza, Finolex/Havells. Note : 2 runs of 4 Sqmm cable, 1 run of 2.5 Sqmm PVC insulated, unsheathed, single core, multi stranded copper conductor cable and 1 run of PVC casing/caping 25mm/32mm wide shall be measured as single run.

Supply & Fix MCB 06-32 Amps 240 Volts single pole 'B' series make : Schneider or equivalent in L&T/Legrand

Supply & Fix MCB single pole and neutral 240 Volts 05-30 Amps 'B' series make : Schneider or equivalent in L&T/Legrand

Supply and fix Exhaust fan AC single phase 230 V of size 300mm sweep with louver

M/S NAGINENI RANGA RAO