PROVIDING DRINKING WATER FACILITY TO MIGRANT COLONY ZEWAN BY WAY OF PROVIDING AND LAYING SUPPLY MAINS, SUB MAINS AND DISTRIBUTION SYSTEM ALONG WITH CONSTRUCTION OF CHOWKIDAR QUARTER/PROTECTION WORKS WATER SUPPLY SCHEME MIGRANT COLONY ZEWAN.

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: Ordinary Rock

Providing and laying of dry stone soling in foundation/trenches hand packed and consolidated by hand ramming. (Subject to actual quantities during execution).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. i. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: i. Foundations, footings, bases of columns etc. for mass concrete.

ii. Suspended floors, roofs, landings, balconies and access platforms.

iii. Lintel, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. i. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : i. Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): i. Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). i. Second kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. i. Particle Board 12mm thick. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. i. Second class Kail wood

Providing and fixing IS : 1341 marked M.S. heavy weight - Butt Hinges with necessary screws etc., complete : i. 75x60x3.10 mm

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : i. 250x16 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : i. 100x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete i. 100 mm

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. i. 40mm thick with 20 mm nominal size stone aggregate.

12mm Cement plaster of mix: i. 1 : 6 ( 1 cement : 6 fine sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: i. 1 : 6 ( 1 cement : 6 fine sand

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (Two coats).

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: i. Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. i. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. i. 0.63 mm thick with zinc coating not less than 275 gram/m2

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Welded).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. i. Fixed to steel windows by welding

Providing and fixing plained eaves boarding. i. 250x32 mm (nominal size )

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws i. Budloo/fir wood

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Medium. i. 80mm dia. nominal bore

ii. 65mm dia. nominal bore

iii. 50mm dia. nominal bore

iv. 40mm dia. nominal bore

v. 25mm dia. nominal bore

vi. 20mm dia. nominal bore

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 i. 100 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. i. 100 mm dia pipes

Providing and fixing of MS Flanges to pipes including cost of nuts, bolts, washers and protection to burries flanges as per directions of the Engineer Inachrge so as to make the flange leak proof/water tight and safe from corrosion complete as per site conditions and requirement for: i. 100mm dia GI Pipes.

ii. 80mm dia GI Pipes.

iii. 65mm dia GI Pipes.

iv. 50mm dia GI Pipes

v. 40mm dia GI Pipes.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing of Sluice Valves of approved make and manufacture like VAG, ZOLOTO, KIRLOSKAR including carriage to actual site of work water testing of joints, commissioning of all interconnection complete job. i. Sluice Value 100mm dia

ii. Sluice Value 80mm dia

iii. Gate Value 65/50mm dia

iv. Gate Value 40mm dia

Providing of FHTC @1000 Flats@3500/HH (including cost of 15mm-20mm dia G.I. Pipe, pipe fittings, pipe specials, fixtures, water meters etc.).

Providing and fixing of MS fittings with bends Tees, Connection Clips, MS Surface boxes of suitable degrees / sizes to be fabricated of MS Plate as per requirement at site. The item also includes cost of lead spun yarn, cutting of pipes, weding, providing of MS Flanges with nuts bolts and washers complete job.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete i. 50 to 80 mm nominal bore

ii. 25 to 40 mm nominal bore

Providing and placement of HP Desktop All-in-one 12th Gen. Intel Core –i7 24inch (60.4cm) FHD Desktop (16GB RAM/512 SSD/Win 11/Wireless Keyboard and Mouse Combo / MSO / Intel Iris Graphics / IR Privacy Camera / Starry White) including all carriages. This item also includes supply of Computer table and Computer Chair of standard make complete job.

Carriage of material from various source upto road site of work by mechanical transport. i. Cement and Steel for an avg. lead of 10Kms.

ii. Bricks for an avg. lead of 25Kms

iii. Coarse Aggregate for an avg. lead of 5Kms.

iv. Coarse Aggregate for an avg. lead of 5Kms.

v. Sand for an avg. leadoff 15Kms.

vi. Stone soling for an avg. lead of 5Kms

M/s F M Infrastructure Builders Private Limited

M/S ARFAT INFRA BUILD

Aadil Costructions

MOHAMMAD AYOOB MIR

M/s A R Paul Builders and Engineers Pvt. Ltd.