SITC of Kitchen Equipment @ Combo Hotel

Technical Specification

Frame Capacity in kW

Power Module Capacity in kW

Max Number of Power Modules

Max Number of frames in parallel

Input Characteristics:

Rated Voltage tolerance without battery sharing according with load rate

Rated Frequency

Current Harmonic Distortion (THDi) @full load & <1%THDv

Input Power factor at rated Voltage (from 25% to 100% load)

Input Protection

Delay of Progressive start of rectifier (Power walk in start delay)

Battery Characteristics:

No of Lead cells/Battery Blocks

Rated Battery Voltage

Ripple Current with Recharged Battery (%)

Float voltage (2.26V/cell, Configurable)

Recharge Voltage(2.3V/cell, Configurable)

Maximum Output Voltage (Vdc)

End of Discharge Voltage Vdc (1.75V/cell, Configurable)

Voltage Compensation with reference to the battery room/cabinet temperature (Vper deg C)

Maximum Current to charge battery (Amp)

Output Characteristics:

Rated Frequency

Voltage Variation - Static Load

Voltage Variation - Dynamic Loads

Recovery Time within +/-1%

Voltage Distortion at linear load

Voltage Distortion at nonlinear load

Frequency stability with inverter synchronized to the by-pass mains

Frequency stability with inverter not synchronized to the by-pass mains

Speed of Frequency Variation / Slew Rate

Dis-symmetry of the phase’s voltage with balanced or unbalanced load

Voltage phase shift with balanced and unbalanced load

Overload capacity at 40deg C

Output performance classification (According to IEC / EN62040-3)

Load Power Factor

Short Circuit Withstand

Inverter Efficiency

Efficiency Characteristics:

Efficiency @ 100% load

Efficiency @ 75% load

Efficiency @ 50% load

Efficiency @ 25% load

Bypass Characteristics:

Rated Frequency

Rated Frequency Tolerance

Switching onto by-pass with Inverter synchronized (UPS in “Normal Mode”)

Switching onto by-pass with non-synchronized Inverter (UPS in “Normal Mode”)

Switching from by-pass to Inverter-Eco Mode

Overload capacity on by-pass line (kVA)

Communication Characteristics:

Monitoring of Local Area Network

Building Management System

Emergency Power Off (EPO)

Environmental Characteristics:

Maximum Temperature for 8 hours a day

Average Temperature for 24 hours

Recommended Battery Temperature

Range of Relative Humidity

Maximum Operating Altitude

Storage Temperature

Acoustic noise at 1m from panel front (Ref ISO3746)

Mechanical Characteristics:

Dimension in mm - Frame

Dimension in mm - Module

Weight in Kgs - Frame without power module

Weight in Kgs - Module

Ingress Protection of Cabinet

Input Characteristics:

Rated input voltage

Input voltage tolerance band - without battery sharing with load.

Rated input frequency

Total harmonic distortion of current ITHD (With mains VTHD < 1%)

Input power factor at rated voltage. (From 25% to 100% load)

Delay of progressive start of rectifier (Power Walk-in Start delay)

Battery Characteristics:

Number of lead cells / Battery blocks

Rated battery voltage

Ripple current with recharged battery (%)

Float voltage (2.26 V/cell., configurable)

Recharge Voltage (2.3 V/cell., configurable)

Maximum output voltage (Vdc)

End of discharge voltage Vdc (1.75 V/cell, configurable)

Voltage compensation with reference to the battery room/cabinet temperature (V per °C)

Maximum current to charge battery (A)

Output Characteristics:

Rated power (kVA)

Rated active power (kW)

Nominal Current (A)

Rated output voltage

Rated frequency

Static variation

Dynamic variation

Recovery time within ±1%

Crest current factor (as per EN 62040-3)

Voltage distortion at linear load

Voltage distortion at non-linear load

Frequency stability with inverter synchronized to the by-pass mains

Frequency stability with inverter not synchronized to the by-pass mains.

Speed of frequency variation /Slew Rate (settable)

Dissymmetry of the phase’s voltage with balanced or unbalanced load.

Voltage phase shift with balanced and unbalanced load.

Overload capacity

Battery mode efficiency (%) at full load

Bypass Characteristics:

Rated voltage tolerance

Rated frequency

Rated frequency tolerance

Switching onto by-pass with Inverter synchronized (UPS in “Normal Mode”)

Switching onto by-pass with non-synchronized Inverter (UPS in “Normal Mode”)

Switching from by-pass to Inverter (UPS in DIM)

Efficiency Characteristics:

Efficiency AC/AC (System on line)

Efficiency system in DIM mode (ECO mode)

Environmental Characteristics:

Ambient temperature for the UPS

Maximum temperature for 8 hours a day

Average temperature for 24 hours

Recommended battery temperature

Range of relative Humidity

Maximum Operating Altitude

Storage temperature

Acoustic noise at 1 m from panel front (Ref ISO 3746)

Mechanical Characteristics:

Dimensions (WxDxH) (mm)

Degree of protection for enclosure

Cabinet steel thickness

HMI Characteristics

Parameters in HMI

Communication characteristics:

UPS & BATTERY MAKE DETAILS

SL NO DESCRIPTION MAKE 1 MAKE 2 MAKE 3 MAKE 4 MAKE 5 MAKE 6 MAKE 7 MAKE 8 MAKE 9 MAKE 10

1 UPS DELTA FUJI ELECTRIC EATON VERTIV SCHNEIDER SOCOMEC NUMERIC LEGRAND FUJI RIELLO

2 BATTERY EXIDE AMARA RAJA ENEROCKET

Project CONROAD

Subject LIGHT FIXTURES QTY

LOCATION 15W LED SURFACE MOUNTING LED ROUND (STAIRCASE & TOILET) 20W SURFACE / WALL MOUNTING LED LIGHT (PARKING) 40W SURFACE MOUNTING LED LIGHT (DRIVEWAY & ROOM) 15W LED SURFACE/RECESSED LIGHT FIXTURE FOR (LIFT &CORRIDORS) EXHAUST FAN 6/16A SOCKET

LOWER GROUND FLOOR 16 100 4 8 31

UPPER GROUND FLOOR (B1) 59 14

UPPER GROUND FLOOR (B2) 21 6

UPPER GROUND FLOOR (B3) 21 6

UPPER GROUND FLOOR (B6) 69 18