Supply and Conversion of Gun metal, C.I, C.S Casting For The Season 2021-22

Description

Casting: Cast Iron Scrapper casting charges for new scrapper on conversion basis as per drawing

Casting: Cast Iron Scrapper casting charges on conversion basis as per drg.

Casting: Cast Iron Clamp for Boiler, casting charges for new clamp as per drawing/sample. Temp. 1100°C

Casting: Cast Iron clamp after adjustmentof CI scrap as per drg/sample. Temp. 1100°C

Casting: Channel and brackets for boiler as per drg./sample - casting charges for new channel and brackets Temp. 1100°C

Casting: Channel and brackets for boiler as per drg /sample casting charges after adjustment of CI scrap Temp. 1100°C

Casting: C.I. Grate Bar for boiler furnace as per drg,/sample Casting charges for new grate bar temp. 1100°C

Casting - CI door with frams for 20 ton. Boiler chamber as per drg. Casting charges after adjustment of CI scrap Temp. 1100°C

Casting: CI Mouth piece.Casting Charges for new CI Mouth piece and baflle as per drawing/sample. Temp. 1100°C

Casting: CI Mouth piece and baflle after adjustment of CI scrap as per drawing/sampl. Temp. 1100°C

Casting: CI Elephant Ear for 20 ton. Boiler Furnace as per drawing/sampl. Temp. 1100°C

Ph bronze worm wheel complete for R.G. Box size 8"FSM ratio 15:1.as per drg./sample.

Ph bronze worm wheel for R.G. Box size 6" CRS ratio 20:1 as per drg./sample

Ph bronze worm wheel complete for R.G.Box size U-500 ratio 20:1

Ph bronze worm wheel complete for R.G. Box size U-600 ratio 20:1

Ph bronze worm wheel complete for R.G. Box size U-700 ratio 20:1

Ph bronze worm wheel complete for R.G. Box size U-800 Ratio 20:1

Ph bronze worm wheel Complete for R.G. Box size V-500 ratio 20:1

Ph bronze worm wheel Complete R.G. Box size V - 600 ratio 20:1

Ph bronze worm wheel Complete R.G, Box size V - 700 ratio 20:1

Pinion for Cane Unloader - material EN-9 No. of teeth 20 dia 141mm,face width 98mm, bore 50mm

Pinion for Cane Unloader - material EN-9 No. of teeth 18 dia 200mm,face width 100mm, bore 30mm

Pinion for Cane cane unloader - material EN-9 No. of teeth 18, dia 160mm,face width 125mm, bore 45mm,

Pinion for Cane Unloader - material EN-9 No. of teeth 18 dia 160mm,face width 122mm, bore 45mm

Pinion for Cane unloader - material EN-9 No. of teeth 24 dia 165mm, face width 82mm, bore 50mm

Pinion for Cane unloader - material EN-9 No. of teeth 17 dia 114mm, face width 65mm, bore 40mm

Supply of Ist Mill TRPF DWWS/botom Roller bearing bore size 240mm, as per drg. No. ASR/TRPF/10/1997/A on conversion basis

Pinion for Cane Unloader - material EN-9 no. of teeth 22, dia 145mm, face width 65mm, bore 50mm.

Supply of Ist Mill TRPF DWWS/bottom Roller bearing bore size 244mm, as per drg. No. ASR/TRPF/10/1997/B on conversion basis

Gun Metal Top/side Roller bearing for Mill as per drg. No.ASR/MH/45/1985/A on conversion basis

Gun metal Top/ side Roller bearing Mill as per drg. No.ASR/MH/45/1985/B on conversion basis

Gun Metal Top/ side Roller bearing for Mill as per drg. No. ASR/MH/45/1985/C on conversion basis

Gun Metal Bottom half Roller bearing for Mill as per drg. No. ASR/MH/23/84 on conversion basis.

Ist Mill TRPF top bottom Roller bearing bore size 240mm as per drg. ASR/TPF/10/1997/A on conversion basis.

Mill TRPF Top/ bottom Roller Gun metal bearing bore size 244mm as per drg. ASR/TRPF/10/1997/B on conversion basis

EN-9 Worm shaft for R.G. Box Size 8" as per drg./sample.

EN-9 Worm shaft for R.G. Box Size 6" as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-500 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-600 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-700 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-800 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-1200 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size U-1400 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size V-500 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size V-600 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size V-700 as per drg./sample.

EN-9 Worm shaft for R.G. Box Size V-335 as per drg./sample.

Ph Bronz worm wheel for R.G. Box Size V-335 as per drg./sample

Ph Bronz worm wheel for R.G. Box Size U-1200 as per drg./sample

Ph Bronz worm wheel for R.G. Box Size U-1400 as per drg./sample

CS Gear No of teeth - 96 Face width - 120mm, PCD -1219.2mm, Module -12.7 dedendum - 14.694,PR Angle -20degree for cane carrier drive as per drg.

CS Pinion No of teeth - 20 Face width - 120mm, PCD -254mm, Module -12.7 dedendum - 14.694,PR Angle -20degree for cane carrier drive as per drg.

Willman Bibby coupling Code No. 318 Standard type with pilot bore 50mm specification 318A/50-18

Bagasse Feed Hopper (C.I. Piece for bagasse Feeder IJT Bottom single coller asper drg.No. ASR/Boiler FH2/34/8 on conversion basis.

C.I.Clamp for IJT Boiler one conversion basis As per drawing No. ASR/Boiler IJT/130606

C.I.Hanger for IJT Boiler (Elephant Ear Arh Type)on conversion basis Drg. No.ASR/Boiler/ IJT/10/06

C.I.Lock on conversion basis

C.I.Hanger (Beam) as per our drawing on conversion basis

C.I.Magma Pump Rotor as per Size - OD-352mm, Reducer-155mm Length-335mm on conversion basis

Cast Steel Coupling for Mill Size- 30"x 60"New Material IS1030

Cast Steel Coupling for Mill Size- 30"x60" New Material but material IS2708

Cast Steel Coupling for Mill Size-30" x 60" conversion IS 1030

Cast Steel Coupling for Mill Size-30"x60"on conversion IS2708

Cast Steel Coupling for Mill Soze-30"x 60" Machining Charges

Cast Steel Crown Pinion for Mill Size -30"x60 New Material IS1030

Cast Steel Crown Pinion for Mill Size -30"x60 New Material is IS2708

Cast Steel Crown Pinion for Mill Size-30"x60" on conversion basis IS1030

Cast Steel Crown Pinion for Mill Size-30"x60" on conversion basis IS1030 IS2708

Cast steel Crown Pinion for Mill Size Profiles Teeth Cutting Machining charges

Cast stel Trash Plate for Mill Size-30"x60" New Material IS1030

Cast stel Trash Plate for Mill Size-30"x60" New Material IS2708

Cast Steel Trash Plate for Mill Size-30"x60"on conversion basis IS2708

Cast Steel Trash Plate for Mill Size-30"x60" Machining Charges

Other Casting i.e. Trash Plate Beam etc. New Material IS-1030

Other Casting i.e. Trash Plate Beam etc. New Material IS-2708

Other Casting i.e. Trash Plate Beam etc. on Conversion IS-1030

Other Casting i.e. Trash Plate Beam etc. on Conversion IS-2708

Other Casting i.e. Trash Plate Beam etc. Machining Charges

PRECISION ENGG WORKS

swastik metals

SHREE RAJENDRA UDYOG