Renovation of Cover threshing floor in B block pump house at ICAR-NRRI, Cuttack-6

Amount

Renovation of cover threshing floor in B Block at ICAR-NRRI Cuttack

Dismantling Brick Masonry Under 3.00mtr. Height and cleaning debrises.

Earth work in ordinary soil for foundation within 1.5 mt. initial lift & 50 m initial lead

Sand filling in foundation & plinth, well-watered and rammed

25mm thick Grading concrete (1:2:2) with 6mm size Gr.C.B Chips.

PCC (1:4:8) using 2.5 to 4cm size crusher broken granite metal

PCC (1:2:4) using 12mm size crusher broken hard granite chips.

RCC work in C.C. (1:2:4) using 12 to 20mm crusher broken hard granite chips.

Supply, Cutting, bending & binding of M S rod for RCC work.

Brick work with Fly ash bricks in cement mortar (1:6).

12mm thick cement plastering with 1:4 CM with neat cement punning.

12mm thick cement plastering with 1:4 CM

2.5 CM (1") Thick A.S Flooring in C.C (1:2:4)

Supply and Painting Two Coats S.E Paint to New Iron Work Over a Coat of Red oxide Primer.

Supply and painting two coats of Weather seal coat over a coat of water bound wall primer after scraping and cleaning the surface.

Supply and fixing MS pipe (60x40mm,50mm &40mm) with truss for pillar and purlin etc. made up of MS pipe including cutting, welding and fitting & transportation etc.

Supplying and fixing Mounting Nut, bolt & plate etc.

Supply and fixing 0.5mm thick G.I. color sheets on Roofs including drilling holes with L/J hooks and Topi washer

Supply and fixing 0.5mm thick G.I. color sheet ridges

Providing and laying factory made chamfered edge cement concrete paver blocks of required strength, thickness& size/shape made by table vibratory method, to attain superior smooth finish using PU OR Equivalent molds, laid in required approved color and pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding /laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator ,filling joints with fine sand and cutting of paver blocks as per required size/pattern, finishing and sweeping extra sand in footpath ,parks, lawns, drive ways, or light traffic parking and lanes/road etc. All complete as per Manufacturers specification and direction of Engineer-in-charge.80mm thick C.C Paver Blocks of M-30 grade with approved color design pattern etc. Complete.

RCC slab 65mm for working table in C.C. (1:2:4) including centering and shuttering

Rigid and Smooth centering & shuttering for Concreting work.

Labor charge for bending of M.S PIPE in proper position and alignment including transportation.

Labor charge for bending of G.I color sheet in proper position and alignment including transportation.

Disposal of Materials by Tractor Load

Repair of M.S flat and Iron door including cutting, Welding etc. where necessary with all cost labour T&P etc

M/S UTKAL ENGINEERING (BID ID -3105511)