Housing Colony at Solan Saproon Ph I co 3 nos type II Flat with partking in floor etc

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (upto all depth and width as well as on plan) including getting out and disposal of excavated earth upto all lead, lifts as directed by Engineer-in-charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (up to all width on plan), including dressing of sides and ramming of bottoms, upto all lift, including getting out the excavated soil and disposal of surplus excavated soil upto all leads & lifts, as directed by the , with all lead and lift. All kind of soil

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (upto all width or all Sqm on plan), including dressing of sides and ramming of bottoms, upto all lift, including getting out the excavated soil and disposal of surplus excavated soils upto all leads and lifts as directed by the Engineer-in-Charge. Ordinary rock

Excavating trenches of required width for pipes, cables,etc including excavation for sockets, and dressing of sides, ramming of bottoms, upto all depth upto , including getting out the excavated soil, and then returning the soil as required, in layers upto all depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil up to all leads & lifts as directed by the Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding all in depth/ in width as well as all Sqm on plan) including getting out and disposal of excavated earth upto all leads and lifts, as directed by Engineer-incharge, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge. Ordinary rock.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material in all leads & lifts.

Stone soling properly handpacked filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour)including carriage of material in all leads & lifts.

Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of material in all leads & lifts.

Providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of material in all leads and lifts

1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)

1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete 1 : 8 : 16 (1 cement:8 sand:16 graded stone aggregate 20 mm nominal size) and curing complete on slab & floor excluding cost of form work screed laid under floor including carriage of materialin all leads and lifts.

Providing and laying cement concrete 1 : 8 : 16 (1 cement:8 sand:16 graded stone aggregate 40 mm nominal size) and curing complete on deprresd portion excluding cost of form work screed laid under floor including carriage of materialin all leads and lifts.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil Including carriage of material in all leads and lifts.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge including carriage of material in all leads and lifts. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge including carriage of material in all leads and lifts. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : including carriage of material in all leads & lifts.1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up tofloor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form including carriage of material in all leads and lifts.

Foundations, footings, bases of columns,etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders,bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiralstaircases

Edges of slabs and breaks in floors and walls

Weather shade, Chajjas, corbels etc., including edges

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level / above plinth level including carriage of materialin all leads and lifts.

Smooth finishing of the exposed surface of R.C.C. Work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand) including carriage of material in all leads & lifts.

Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections Including carriage of material in all leads and lifts.

Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: including carriage of material in all leads and lifts. Cement Mortar 1:6 (1 cement : 6 coarse sand).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)including carriage of materialin all leads and lifts.

Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level including carriage of material in all leads & lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material in all leads and lifts.

Providing and fixing PVC pipe of ISI market 100 mm. dia for weep holes in brick masonry / stone masonry/ reinforced cement concrete R/wall, including carrage of material in all leads &lifts.

Providing Stone filling behind retaining walls including carrage of material in all leads &lifts.

Providing and fixing Ist quality ceramic digital glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge i/c cost for cutting the tiles whwrever required, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material in all leads & lifts.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, frames and fixed in position including carriage of material in all leads and lifts.(a) Ivory coast teak Wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. with necessary screws all complete as per drawing and specification and instructions of Engineer-in-charge including carriage of material in all leads and lifts. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & fixing 35mm thick single/double leaf fully glazed window shutters made of 1st class ivory coast teak wood having styles & top rail & bottom rail 75mm width and chamferred edged beading 20x12mm for glass panes complete including bright finished/black enamelled iron butt hinges with necessary screws including carriage of material in all leads and lifts.

Providing and fixing 35mm thick wire guage shutters using galvanised M.S guage of I.S.guage designation 85 G with wire of dia 0.56mm for doors, windows & clerestory windows including bright finished black enamelled iron butt hinges with necessary screws etc I/c chamfered edged beading 20x12.5mm size.complete including carriage of material in all leads .and lifts. (a) 1st class ivory coast wood.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc Complete 2nd Class Teak Wood including carriage of material in all leads and lifts.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeves etc., wherever necessary complete including carriage of material in all leads and lifts. 20 mm dia

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including carriage of material in all leads & lifts. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts

Fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete including carriage of material in all leads and lifts. (L.R.)

Fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete including carriage of material in all leads &lifts. (L.R.)

Fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of material in all leads &lifts. Triple strip vertical type (L.R.)

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality including carriage of material in all leads &lifts. 1.0 mm thick

Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in- Charge including carriage of material in all leads &lifts. With decorative veneering on one side and commercial veneering on other side

Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately) including carriage of material in all leads &lifts. Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to IS:14587

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including carriage of material in all leads and lifts

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete including carriage of material in all leads and lifts

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts.

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). including carriage of material in all leads and lifts.

Fixing stainless steel sliding door bolt transparent or dyed to required colour and shade with bolts, nuts and screws etc. complete including carriage of material in all leads & lifts. (L.R.)

Fixing stainless steel tower bolt (barrel type) annodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads & lifts. (L.R.)

Fixing stainless steel handles annodized transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of material in all leads & lifts. (L.R.)

Fixing Stainless steel hook & eyes with necessary screws or welding to chowakat including carriage of material in all leads and lifts.150mm.(L.R.)

Fixing Stainless steel floor door stopper with necessary screws etc. complete including carriage of material in all leads and lifts. (L.R.)

Fixing cupboard lock with necessary screws etc. Complete including carriage of material in all leads &lifts. (L.R.)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete including carriage of material in all leads and lifts. 40 mm thick with 20 mm nominal size stone aggregate

Providing anfd fixing glass strip in joints of terrazo/cement concrete floors including carrage of material in all leads &lifts. 40 mm wide and 4 mm thick

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant of any size & colour manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts.

Providing and laying vitrified floor tiles 10mm thick of any size with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads &lifts.

Providing and laying Vitrified tiles 8mm thickof any size with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of material in all leads & lifts.

Providing and laying Polished Granite stone flooring rounded at edge in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge including carriage of material in all leads and lifts.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing M.S. holder bat clamps of approved design to PVC / C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc including carriage of material in all leads and lifts. 100 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes i/c carriage of material in all leads and lifts. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion i/c carriage of material in all leads and lifts

Bend 87.5° 110 mm bend

Shoe (Plain) 110 mm Shoe

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including carriage of material in all leads and lifts.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : including carriage of material in all leads and lifts.

Ridges or hips plain (500 - 600mm)

Gutter/ valley (600 mm over all girth)

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) i/c carriage of material in all leads and lifts.

6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts.

12 mm cement plaster finished with a floating coat of neat cement of mix1:4(1cement :4sand) including carriage of material in all leads & lifts.

15 mm cement plaster on the fair side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts.

20 mm cement plaster on the rough of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) on rough side wall including carriage of material in all leads & lifts.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat withcement primer including carriage of material in all leads and lifts.

On Wall

On Ceiling.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.including carriage of material in all leads and lifts.

French spirit polishing Two or more coats on new works including a coat of wood filler including carriage of material in all leads and lifts.

Providing and fixing 40mm nominal bore galvanised M.S. Tube(light grade) out let in cement mortar 1:3(1 cement: 3 Sand) including carriage of material in all leads and lifts.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design Including carriage of material in all leads and lifts.

Providing and fixing glass panes, with wooden fillets wherever necessary including carriage of material in all leads and lifts. Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing precast Cement concrete kerb stone size 45x23x7.5 Cm vertically with cement mortar 1:3 (1 cement: 3 Sand) in parking as per direction of Engineer-in-Charge including carriage of material in all leads and lifts.

Fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Including carriage of material in all leads & lifts W.C. pan with ISI marked white solid plastic seat and lid including carriage of material in leads and lifts. (L.R.)

Fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required but excluding fittings Hindware/ Cera make including carriage of material in leads and lifts. White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (L.R.)

Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : but excluding fitting including carriage of material in all leads and lifts(i)Kitchen sink with drain board including carriage of material in leads and lifts. 510x1040 mm bowl depth 250 mm (L.R.)

Fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Including carriage of material in all leads and lifts. Flexible pipe (L.R.)

32mm nominal bore

40 mm nominal bore

Fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers including carriage of material in all leads & lifts. (L.R.)

Fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Including carriage of material in all leads and lifts. (L.R.)

Fixing toilet paper holder including carriage of material in all leads and lifts. C.P. Brass (L.R.)

Fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. including carriage of material in all leads & lifts. (L.R.)

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in charge.including carriage of material in all leads and lifts. INTERNAL WORK - EXPOSED ON WALL 1216 (16 mm OD) pipe SANT-RIFENG, KISAN, VECTUS

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube ittings (earth work in trenches to be measured and paid separately including carriage of material in all leads and lifts.

16 mm nominal bore

20mm nominal bore

Making connection of galvanised steel distribution branch with galvanised mild steel main 25mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts: (JINDAL/ TATA MAKE).

Fixing PVC connection pipe Including carriage of material in all leads and lifts. 15mm dia 45 cm. length. (L.R.)

Fixing C.P. Brass shower rose with 15mm or 20mm inlet Including carriage of material in all leads & lifts 150mm dia (L.R.)

Providing and fixing G.I./M.I Union of following sizes (Where not included in the items.Including carriage of material in all leads and lifts.

15mm nominal bore

32mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material in all leads and lifts 1000 litres net capacity storage tank of ISI marked sintex make with double.layer including MS Stays for water storage tank.

Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipe ISI marked i/c fixing with approved adhensive (i/c PVC clips where ever required) including carriage of material in leads and lifts.

90 mm nominal size.

110mm nominal size.

150mm nominal size.

Providing and fixing PVC Plain bend ISI marked complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

150mm nominal size.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

150mm nominal size.

P/F PVC Single equal branch ISI marked of required degree with oval access door insertion rubber washer 3mm thick bolts and nuts complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

150mm nominal size.

Providing and fixing PVC Collar i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

150mm nominal size.

Providing and fixing (ISI marked) PVC cowl i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts.

90mm nominal size.

110mm nominal size.

Providing and fixing (ISI marked) PVC floor trap of self cleaning design i/c fixing with approved adhensive with C.P. screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including carriage of material in all leads and lifts.110x90 mm

Providing and fixing C.P. connection pipe with brass union Including carriage of material in all leads and lifts.15mm dia 45 cm. length.

Fixing M.I Union for Wash basin & Sink Including carriage of material in all leads and lifts. 32mm nominal bore (L.R.)

32mm nominal bore

40 mm nominal bore

Fixing C.P. brass waste for wash basin or sink including carriage of material in all leads & lifts. (L.R.)

32mm dia

40 mm dia

Fixing C.P. brass towel rail complete with C.P. Brass brackets fixed with Plastic Gitti, drilling hole, C.P. brass screws etc complete in all respects including carriage of material in all leads and lifts.600mmx20 mm (L.R.)

Fixing C.P. brass towel ring with Plastic Gitti, Drilling hole etc complete in all respects Including carriage of material in all leads and lifts. (L.R.)

Fixing 8 mm dia C.P. / S.S. health faucet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge Including carriage of material in all leads and lifts. (L.R.)

Fixing two hole basin mixing Faucet Including carriage of material in all leads and lifts. (L.R.)

Fixing 15 mm C.P. mixer for kitchan sink with top/ bottom swinging spout Including carriage of material in all leads and lifts. (L.R.)

Fixing wall mixing faucet for shower and bath with overhead pipe (1210cm) and bath shower including carriage of material in all leads & lifts. (L.R.)

Fixing C.P. brass bib cock of approved quality conforming to IS standards and weighing not less than 690 gms Including carriage of material in all leads and lifts. 15mm dia (L.R.)

Long Body

Short Body

Fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 Including carriage of material in all leads and lifts. 15 mm nominal bore (L.R.)

Fixing C.P. Brass angle valve 15 mm without/with nuts Including carriage of material in all leads and lifts. 15 mm dia (L.R.)

Fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Including carriage of materia in all leads and lifts. (L.R.)

Fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap i/c carriage of material in all leads & lifts. (L.R.)

Fixing brass full way valve with wheel Including carriage of material in all leads and lifts. (L.R.)

15mm nominal bore

20mm nominal bore

Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs depth of cutting (i) Holes upto and including 400 sqcm in area including carriage of material in all leads and lifts

Providing chases 75mm wide 50mm deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregate 20 mm and down gauge) after the conduit pipe is laid (excluding the cost of conduit pipe) including carriage of materialin all leads and lifts.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) including carriage of material in all leads and lifts. 150 mm diameter

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads and lifts. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts.

Inside size 120x90 cm and 90 cm deep including S.F.R.C. manhole frame and cover (medium duty) 560 mm internal diameter, total weight of cover and frame to be not less than 173 kg (weight of cover 70 kg and weight of frame 103 kg) with 230mm thick walls of common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Inside size 90x80 cm and 45 cm deep including S.F.R.C. manhole frame and cover (medium duty) 560 mm internal diameter, total weight of cover and frame to be not less than 173 kg (weight of cover 70 kg and weight of frame 103 kg) with 230mm thick walls of common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth for manholes :Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of material in all leads & lifts. Circular shape 560 mm internal diameter

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete including carriage of material in all leads and lifts. For pipes 100 to 250 mm diameter

Supplying and fixing 2.00 H.P. motor for lifting the water from RWHT to PVC tank including carriage of material in all leads and lifts.

suman kumar sharma

Ram Pal Saini

Sohan Singh Govt. Contractor