Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.0 Cr
EMD Value
₹6.0 L
Closing Date
29 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Capacity augmentation of Substation 3 and 4 for power supply provisioning for Rig Lab area Equipments-Fuel Factory
7798
HAL-ADL/9995/24-25/CAP/RIG-LAB/106
Works
Accessories Complex - Lucknow Divn - Plant Maintenance
₹0
₹6.0 L
29 Jul 2024
8 Jun 2024
8 Jun 2024
29 Jul 2024
HINDUSTAN AERONAUTICS LIMITED ACCESSORIES DIVISION, LUCKNOW PQ FORM/ELIGIBILITY CRITERION-MATRIX
NAME OF THE WORK: "Capacity augmentation of Substation 3 and 4 for power supply provisioning for Rig Lab area equipments-Fuel Factory"
Estimated Cost (in Rs.) 29,917,439.45
S# Intending bidders must meet the following eligibility criterion:
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
4 Address of Correspondence
5 Contact Details: Contact person name: Designation: Mobile No:. Ph. No. with STD code: Email Id :
6 Contractor must give his acceptance to provide services as per ‘Requirement, Scope of work, Drawings’ and ‘Terms & Conditions' contained in Technical Bid.
7 Self attested copy of PAN/GIR No. Registration certificate issued by income tax authority.
8 Self attested Copy of GST Registration Certificate.
9* Average annual turnover during the last 3 years, ending 31st March of previous financial year, should be at least 30% of the approximate estimated amount put to tender. Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year i.e. Fin Year 2020-21,2021-22 & 2022-23 8,975,232.00
10* Valid “A” class Electrical contractor licence of appropriate voltage issued by any state Govt. Under clause 45 of Indian Electricity Rules 1956 or as amended from time to time.
11* The Solvency required will be 40% of the approx. estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 months from the final date of Submission of tender.(in Rs.) 11,966,976.00
12* EMD amount (in Rs.) 598,349.00
13* Self attested Copy of PF Code Certificate(if applicable).
14* Self attested Copy of ESI Number certificate (if applicable).
15* Bid Capacity: List A and B to be prepared by Bidder and attached separately. List A: list of value of works completed in last five years i.e from April'19 onwards to Mar'24 duly certified by Chartered Accountant. List B: Details of existing commitments and ongoing works to be completed by Dec'24.
i. Bidder has to provide the list of value of works completed in last five years i.e from April'19 onwards to Mar'24. (List A) ii.Details of existing commitments and ongoing works to completed by Dec'24. (List B) Bid capacity of the bidder shal be calculated using formula 2xAxN-B, where N is number of years for completion of subject project/contract. Bidder shal only be qualified only if their available bid capacity is more than the estimated project cost.
16* Experience of having successfully completed similar works as indicated in the work details during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following (in Rs.):-
i Three similar completed each work costing not less than 40% of estimated amount. OR 11,966,976.00 PO no.: Value : Completion Date: Customer:
11,966,976.00 PO no.: Value : Completion Date: Customer:
11,966,976.00 PO no.: Value : Completion Date: Customer:
ii Two similar completed work costing not less than the amount equal to 50% of the estimated cost. OR 14,958,720.00 PO no.: Value : Completion Date: Customer:
14,958,720.00 PO no.: Value : Completion Date: Customer:
iii One similar completed work costing not less than the amount equal to 80% of the estimated cost. 23,933,952.00 PO no.: Value : Completion Date: Customer:
17 Income tax returns for last three years
18 Annual turnover for the last five years
19 Plant & Machinery details for the work
20 Proposed work completion schedule in the form of bar-Chart
21 Details of Work in hand with value
22 Bank balance Statement for last three months
23 Overdraft facilities available with the agencies
24 Balance Sheet for last five years
25 DECLARATION I ACCEPTED/NOT ACCEPTED
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
26 DECLARATION II ACCEPTED/NOT ACCEPTED
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. 5.I/We are not debarred / blacklisted from any Govt agencies, if debars for specified period reason for debar and copy of resumption of same shall be provided. 6. I/We have not concealed any information which may adversely effect my qualification.
27 DECLARATION III COMPLIED/NOT COMPLIED
I/We declare and confirm that all the documents related to NIT mentioned at SI.No.2 and 3 have been attached with the technical bid.
Name of Bidder:
* 1. To be filled by Bidder essentially and carefully. Supporting documents must be attached as proof. Clarifications shall be sought w.r.t. information provided with tender documents. 2. Similar works implied that works related to HT/LT Electrical Works in nature. Mere supply of electrical goods does not mean qulification in the tender. 3. Scanned copy of completed work orders and completion certificate issued by respective clients to be attached. If the completion certificate is form private organization the same shall be uploaded with TDS certificate. 4. The work shall be completed as a whole, Partial value/completion will not be considered. 5. The Bidders are requested to attach scan copies of all the relevant / desired / required proofs/ documents on e-portal, failing which tender shall be summarily rejected without assigning any reason to bidders.
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow PRICE BID
NAME OF THE WORK: "Capacity augmentation of Substation 3 and 4 for power supply provisioning for Rig Lab area equipments-Fuel Factory"
Sl. No. Description Qty Unit Supply Rate Installation Rate Amount (Supply + Installation)
1 LT Panels (Refer General Conditions & Specifications Documents) Make: Excel Controls, Kanpur/Amit Engineering, Lucknow/Sun Engioneering, Lucknow
i. Supply & installation of LT panel-1 at Substation 3 for Old Rig lab Area Equipments (Location Substation 3 Extension): Incomer: 2500 Ax1 no. 4P,50 KA, EDO type Microprocessor based with LSING protection ACBx1 No. with advanced LED type Multifunction meter with RS485 port, RYB LED indicator, Class 1.0 2500/5A 5VA CT, Spring return TNC switch with lever type handle and under volatge release with extended busbar suitable for termination of Buduct. Outgoing with ampere meter: 630A x 8 Nos. 4P MCCB Type with extended busbar suitable for termaintion of 2Rx4Cx400 Sqmm Al Ar. Cable with spreaders, extended rotary handle, Multifunction meter, RYB LED indicator, Class 1.0 600/5A 5VA CT. 1 No.
ii. Replacement of existing MV panel with Supply & installation of MV panel at Substation 3 (Location: Substation 3): Incomer: 3200 Ax2 nos. 4P,50 KA, EDO type Microprocessor based with LSING protection ACBx1 No. with extended busbar suitable for termaintion of 6Rx4Cx400 Sqmm Al Ar. Cable, with advanced LED type Multifunction meter with RS485 port, RYB LED indicator, Class 1.0 CT, Spring return TNC switch with lever type handle and under volatge release. Buscoupler: 3200A, 4P, 50KA EDO type ACB without protection with under voltage release, spring retrun TNC Switch, RYB LED indicators Outgoing with ampere meter: 1000A x 02 No. 4P ACB Type with extended busbar suitable for termaintion of 3Rx4Cx400 Sqmm Al Ar. Cable with spreaders, extended rotary handle, Multifunction meter, RYB LED indicator, Class 1.0 1250/5A 5VA CT 630A x 14 Nos. 4P MCCB Type with extended busbar suitable for termaintion of 2Rx4Cx400 Sqmm Al Ar. Cable with spreaders, extended rotary handle, Multifunction meter, RYB LED indicator, Class 1.0 600/5A 5VA CT Dimension of LT panels shall be suitable to existing available space.Removing of existing MV panel and shiting of termination from existing panel to new panel shall be in the scope of contractor. 1 No.
iii. Replacement of existing MV panel with Supply & installation of MV panel at Substation 3 (Location: Substation 3): Incomer: 1000 Ax1 nos. 4P,50 KA, EDO type Microprocessor based with LSING protection ACBx1 No. with extended busbar suitable for termaintion of 6Rx4Cx400 Sqmm Al Ar. Cable, with advanced LED type Multifunction meter with RS485 port, RYB LED indicator, Class 1.0 CT, Spring return TNC switch with lever type handle and under volatge release. Outgoing with ampere meter: 400A x 02 Nos. 4P MCCB Type with extended busbar suitable for termaintion of 1Rx4Cx400 Sqmm Al Ar. Cable with spreaders, extended rotary handle, RYB LED indicator, Class 1.0 400/5A 5VA CT 250A x 02 Nos. 4P MCCB Type with extended busbar suitable for termaintion of 1Rx4Cx240 Sqmm Al Ar. Cable with spreaders, extended rotary handle, RYB LED indicator, Class 1.0 250/5A 5VA CT 125A x 02 Nos. 4P MCCB Type with extended busbar suitable for termaintion of 1Rx4Cx150 Sqmm Al Ar. Cable with spreaders, extended rotary handle, RYB LED indicator, Class 1.0 125/5A 5VA CT Dimension of LT panels shall be suitable to existing available space.Removing of existing MV panel and shiting of termination from existing panel to new panel shall be in the scope of contractor. 1 No
iv. Replacement of existing MV panel with Supply & installation of MV panel at Substation 4: Incomer: 3200 Ax3 no. 4P,50 KA, EDO type Microprocessor based with LSING protection ACBx1 No. with extended busbar suitable for termaintion of 6Rx4Cx400 Sqmm Al Ar. Cable, with advanced LED type Multifunction meter with RS485 port, RYB LED indicator, Class 1.0 4000/5A 5VA CT, Spring return TNC switch with lever type handle and under volatge release. Bus-coupler: 3200Ax5 Nos.EDO type Microprocessor based ( 4 Buscoupler+1 DG Set) Outgoing with ampere meter: 400A x 11 Nos. 4P MCCB Type with extended busbar suitable for termaintion of 1Rx4Cx400 Sqmm Al Ar. Cable 630A x 23 Nos. 4P MCCB Type with extended busbar suitable for termaintion of 2Rx4Cx400 Sqmm Al Ar. Cable. 1000A x 3 Nos. 4P ACB Type with extended busbar suitable for termaintion of 4Rx4Cx400 Sqmm Al Ar. Cable. 2000A x 5 Nos. 4P ACB Type with extended busbar suitable for termaintion of 2Rx4Cx400 Sqmm Al Ar. Cable. Removing of existing LT panel and shiting of termination from existing panel to new panel shall be in the scope of contractor. 1 No.
2 Supply & laying of PVC/XLPE Cables in cable trays/builtup trench, dressing, clamping, testing and commissioning of the following 1.1KV grade cables Aluminium/Copper XLPE conductor power cable, conforming to IS:7098 (Part-I) for Al cable/IS 694. Cable to be laid as per industry standard with sand cushioning, protective covering and refilling and as per the direction of Engineer-In-Charge. Please note cable is to be laid underground by digging soft/hard soil 80 cm deep. After making trench cable should be laid and covered with sand after that bricks shall be placed in width wise for protection of cable. Cable tray with cable ties will all necessary angle support to be used while laying on surface/open area or as per site requirement. Make: - Universal/RPG/Finolex/Polycab/Havells
i. 3 1/2C x 400Sq.mm Al. Ar. XLPE Insulated 2000 Rmtrs
ii. 3 1/2C x 240Sq.mm Al. Ar. XLPE Insulated 1000 Rmtrs
iii. 1C x 150 Sq mm multistranded Copper Cable 500 Rmtrs
3 Supply & making cable joints with supply of materials which required for jointing work of PVC insulated, PVC sheathed armoured, 1.1 KV grade Aluminium conductor power cable using straight through heat shrinkable jointing kits for following size of cable as detailed below: Make: 3M/Raychem/M-seal
i 3.5 core x 400 sqmm Al Ar. 15 Sets
ii 3.5 core x 400 sqmm Al Ar. 15 Sets
4 LT Termination Supply, installation of termination for 1.1 KV grade cables, using double compession type cable glands, crimping type lugs, bimetallic washers. Make: Comet/Dowells/Connectwell
i. 3 1/2C x 400 Sq.mm Al. Ar. XLPE Insulated 250 Sets
ii. 3 1/2C x 240 Sq.mm Al. Ar. XLPE Insulated 10 Sets
iii. Copper lugs for 150 Sq mm multistranded Copper Cable 50 Nos.
5 Supply and installation of three phase, double door MCB DB suitable for incorporating MCB's, 4 way per phase with following incoming and out goings MCB's Incoming- 63 Amps, TPN Isolator,:MCB-01 No., Outgoings: 10-32 Amps S.P. MCB –12 Nos. The D.B. must be installed flush to the wall and wall must make good after fixing. Make: Legrand/L&T/Schneider/Siemens/Hager 5 Nos
6 Supply and Installation of CIMFR certified flameproof light suitable for twin T8 tube of 16-18W made up of Aluminium LM6 IP65 protected with die cast aluminium housing with heat resistant toughened glass with lamp dirver holders, connector etc complete with all accessories prewired and including connecting up with three core flexible cable of suitable size with necessary angle support etc. (Cost should include removal of existing lights & wiring if any) Make: Crompton/Baliga/Sudhir 20 Nos
7 Supply & installation of LED luminaire 600 mm x 600 mm 35/36W, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper cable of suitable size. (Cost should include removal of existing lights & wiring if any) Make: Crompton/Philips/Havells 50 Nos
8 Supply & making One Light point/fan point/exhaust fan point/call bell point controlled by one modular type switches, 6 Amps 230 Volts with 1.5 sqmm, P.V.C. insulated, copper FRLS type conductor multi stranded wire of 1100/660 Volts grade in heavy duty P.V.C. pipe with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sq mm FRLS PVC insulated copper conductor single core etc. including all accessories such as bends, J.B,tees, ceiling rose, batten holder etc. required for point wiring work. The pipe shall be laid concealed in wall; partially it may be flush to the wall as per site requirement. (Cost should include removal of existing points & wiring if any) Make: Anchor (Roma) for modular Switches, Finolex/L&T/Havells/Polycab for FRLS wires, CAP/MODI/Anchor/GM heavy duty PVC conduit 50 Nos
9 Add to the above Item-1 for each addition on only light points on the same switch circuit including all materials required for such wiring work. 30 Nos
10 Supply & making One (half point) with 5 pin, 6 Amps modular socket controlled by 6 Amps switch modular type on the same board with other switches with 1.5 sqmm, PVC. insulated,copper FRLS type conductor, multi stranded wire. Make: Anchor (Roma) for modular Switches, Finolex/L&T/Havells/Polycab for FRLS wires, CAP/MODI/Anchor/GM heavy duty PVC conduit 20 Nos
11 Wiring for circuit /submains wiring alonghwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed heavy duty class PVC conduit as required. Make: Havells/L&T/Polycab/Finolex
i 2 x 2.5 sqmm (for phase & neutral) + 1 x 2.5 sqmm (for earth) 500 Rmtrs
ii 2 x 4 sqmm (for phase & neutral) + 1 x 4 sqmm (for earth) 500 Rmtrs
12 Supply & fixing of 5/6 A modular switch socket including modular plate, GI Box, 3 module base and cover plate complete (Cost should include removal of existing points & wiring if any) Make: Roma 25 Nos
13 Supply & fixing of 15/16 A modular switch socket including modular plate, GI Box, 3 module base and cover plate complete. (Cost should include removal of existing points & wiring if any). Make: Roma 25 Nos
14 Supply & fixing Single phase 20 A Industrial Socket with MCB & plug top for control (Cost should include removal of existing points & wiring if any). Make: Legrand/Havells/L&T 25 Nos
15 Supply & installation of 12" dia, 1440 RPM IP 65 protected cast iron body aluminium alloy bladde as per IS 2148 Flameproof exhaust fans including making of holes in wall for installation and making good the damages as original. Make: Sudhir/Baliga 10 Nos
16 Supply & installation of high mast galvanized 16 meter mast light suitable for 6 to 9 lantern symeetricaly fitted along with their control gear and having two point suspension system with stainless steel wire rope and doulble drum wuinch with luminaire mounting arm, pully assembly, aviation obstruction light , lightning arrester spike including RCC foundation. Make: Havells/Crompton/Philips(Signify)/Bajaj 1 Nos
i. Supply & installation Cu Bonded Steel Rod 17.2mm dia x 3000mm-( 250 Microns ) UL Listed 467and IEC -62561-2;17.2 / OD SS Clamp Both and 25mm X 3 mm 10 mtr Copper strip Side;Jef Eco Safe carbon based backfill compound ( Maintenances Free Type ) – 25 Kg As per IS / IEC- 62561-7, IEEE-80 and IS 3043 ;Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber. Values of earh pits resistance must be less than 3 ohm. Make: SABO/JEF/CAPE 15 Nos
ii. Supply & laying of 25 x 5 mm GI Flat ( LT Panels) at 0.5 mtr below ground as strip earth elecrode, including connection/ terminating with GI nut, bolt, spring, washer etc as required. (Jointing hall be done by overlapping and with 2 sets of GI nut bolt & spering washer spaced at 50 mm). 100 Rmtrs
18 Supply & installation of Switch fuse Disconnector Units with neceesary consumables: Make: L&T/ Schneider/Siemens
i. 1000 A, 4P ACB, MDO type with busbar extension and SS Enclosure suitable for termination of 4Rx400 Sq. mm Al Ar. Cable 1 No.
ii. 630A, 4P Switch Fuse Disconnectors units with busbar extension and SS Enclosure suitable for termination of 2Rx400 Sq. mm Al Ar. Cable 7 Nos.
iii. 400A, 4P Switch Fuse Disconnectors units with busbar extension and SS Enclosure suitable for termination of 1Rx400 Sq. mm Al Ar. Cable 10 Nos
19 Supply & installing perforated hot dipped GI Cable trays with angle iron supports with connectors, suspended from ceiling with GI suspenders including GI nuts & bolts and cable ties as required.
i. 600 mm wide x 50 mm depth x 1.6 mm thick cable tray 500 Rmtrs
ii. 150 mm wide x 50 mm depth x 1.6 mm thick cable tray 500 Rmtrs
20 Supply & installation of IP 65/67 Protected Panel mounting industrial socket (Straight/Angled) as per site requirement with Plug/connector and enclosure complete. Make: Legrand/Neptune/Havells/L&T
i. 63 Amp (3P+N+E) 25 Nos.
ii. 125 Amp (3P+N+E) 25 Nos.
GST @18% on SUB TOTAL
Name of Bidder:
Note: 1.PLEASE REFER CHAPTER 6 OF TECHNICAL BID FOR TECHNICAL SPECIFICATIONS AND APPROVED MAKES OF ITEMS & EQUIPMENTS FOR THIS WORK .
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 1.01 MB
TECHNICAL_BID.pdf
TENDER_DOCUMENT • 1.09 MB
ELIGIBILITY_CRITERION.xlsm
TENDER_DOCUMENT • 0.01 MB
PRICE_BID.xlsm
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .