PROVISION OF DEFICIENT SINGLE OFFICERS ACCOMMODATION AT CGOM PARADIP UNDER GE I CG BHUBANESWAR

Amount

SCH 'A' PART-I : BUILDING PORTION Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-20.00 Cum + Sch 'A' Part-III-7.00 Cum=Total Qty =27.00 Cum)

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts etc, etc complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-16.00 Cum + Sch 'A' Part-III-6.00 Cum=Total Qty =22.00 Cum)

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-26.00 Cum + Sch 'A' Part-III-13.00 Cum=Total Qty =39.00 Cum)

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the likecomplete all as specified.etc fair finished complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-12.00 Cum + Sch 'A' Part-III-1.00 Cum=Total Qty =13.00 Cum)

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Chajjas complete all as specified.etc fair finished complete, all as specified and as directed.

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in stairways including steps (square or spandril), string pieces, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified.etc fair finished complete all as specified

Form work to sides of pillers, posts, struts, piers,columns and stanchions,square, rectangular,with rough finished surface complete all as specified. (Note : Qty of Sch 'A' Part-I-190.00 Sqm + Sch 'A' Part-III-57.00 Sqm=Total Qty =247.00 Sqm)

Form work to sides of beam and soffit of roof beams, with rough finished flat surface complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-142.00 Sqm + Sch 'A' Part-III-155.00 Sqm=Total Qty =297.00 Sqm)

Form work to soffits of suspended slabs, floor slabs and similar work; not exceeding 200 mm thick(Horizontal or sloping) with with rough finished & flat surface of concrete complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-226.00 Sqm + Sch 'A' Part-III-68.00 Sqm=Total Qty =294.00 Sqm)

Formwork to fins, louvers, fascia with rough finished surface complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-260.00 Sqm + Sch 'A' Part-III-39.00 Sqm=Total Qty =299.00 Sqm)

Form work to chullah hoods, chajjas troughs and similar items including edges, with fair finished flat surface complete, all as specified and as directed.

Formwork to staircase with rough finished surface complete, all as specified and as directed.

Material and labour for mild steel TMT bars 10mm (CRS) dia and over cut to length bent to shape required including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-13300.00 Kgs + Sch 'A' Part-III-2700.00 Kgs=Total Qty =16000.00 Kgs)

Material and labour for mild steel TMT bars 6 to 8mm dia (CRS) and below cut to length bent to shape required including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-600.00 Kgs + Sch 'A' Part-III-40.00 Kgs=Total Qty =640.00 Kgs)

Material and labour Mild steel TMT bars, 5mm dia (CRS) and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-2300.00 Kgs + Sch 'A' Part-III-800.00 Kgs=Total Qty =3100.00 Kgs)

Material and labour for brickwork with modular flyash bricks , straight or curved on plan exc 6m mean radius, built in CM 1:6 complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-57.00 Cum + Sch 'A' Part-III-13.00 Cum+Sch 'A' Part-IV-1.00 Cum=Total Qty =71.00 Cum)

Material and labour brickwork with modular fly ash bricks ,straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete, all as specified and as directed.

Material and labour 25mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in floor and finishing cement concrete surface even and smooth without using extra cement complete all as specified

Material and labour Vitrified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick rendering in cement mortar (1:6) complete.

Material and labour Vitrified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete, all as specified and as directed.

Material and labour Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm thick rendering in cement mortar (1:6) complete, all as specified and as directed.

Material and labour glazed ceramic coloured tiles of size 300x450mmx7mm thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) complete, all as specified and as directed.

Material and labour 20mm thick Granite (of any type) tiles machine cut, in skirting, dado, riser, cooking platform etc laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick rendering in cement mortar(1:4) complete.

Material and labour marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, flooring and landings of stair case, risers, treads and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white over and including 10mm thick rendering in cement mortar(1:4) complete, all as specified and as directed.

Material and labour Chamfer, splays or arris in facework of Granite/ marble n. exc 15mm wide complete all as specified and as directed.

Material and labour 10 mm rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-605.00 Sqm + Sch 'A' Part-III-95.00 Sqm=Total Qty =700.00 Sqm)

Material and labour 15 mm thick rendering in cement mortar (1:4) using water proofing compound @ 3 % by weight of cement in finish coat on other than fair faces of brick wall suerfaces, finished even and smooth without using extra cement complete. Note:- water proofing compound shall be measured and paid separately. (Note : Qty of Sch 'A' Part-I-250.00 Sqm + Sch 'A' Part-III-80.00 Sqm=Total Qty =330.00 Sqm)

Material and labour 5 mm rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. (Note : Qty of Sch 'A' Part-I-506.00 Sqm + Sch 'A' Part-III-95.00 Sqm=Total Qty =601.00 Sqm)

Material and labour preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. (Note : Qty of Sch 'A' Part-I-243.00 Sqm + Sch 'A' Part-III-64.00 Sqm=Total Qty =307.00 Sqm)

Material and labour preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. (Note : Qty of Sch 'A' Part-I-97.00 Sqm + Sch 'A' Part-III-95.00 Sqm=Total Qty =192.00 Sqm)

Material and labour preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distember on smooth surface over a coat of primer paint over a coat of 1mm thick exterior wall putty over new surfaces complete , all as specified and as directed.

Material & Labour for new surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of 1mm thick exterior wall putty over new surfaces complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-501.00 Sqm + Sch 'A' Part-III-111.00 Sqm=Total Qty =612.00 Sqm)

Material & labour for preparation of old surfaces of wall complete removal by washing, rubbing down dirty surface during fixing of aluminium windows etc andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of 1mm thick exterior wall putty surfaces complete, all as specified and as directed.

Material and labour preparation of old steel surfaces and applying one coats of synthetic enamel paint over a coat of red oxide complete, all as specified and as directed.

Material and labour preparation of new wooden surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete, all as specified and as directed.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron complete all as specified complete all as specified and directed. (Note- Glass shall be measured and paid separately) (Note : Qty of Sch 'A' Part-I-465.00 Kgs + Sch 'A' Part-III-30.00 Kgs=Total Qty =495.00 Kgs)

Supply and fixing powder coated anodised aluminium window and ventilator shutters, fixed, openable/ sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete, all as specified and as directed. (Note- Glass shall be measured and paid separately). (Note : Qty of Sch 'A' Part-I-115.00 Sqm + Sch 'A' Part-III-17.00 Sqm=Total Qty =132.00 Sqm)

Supply and fixing aluminum anodized grill DG 202 powder coated (weight : 4.121 Kg/Sqm) of 10 mm dia rod square, rectangular, circular of similar type of shape, aperture not exc 6 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) Make Grill No 20 of DECOREL or equivalent complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-38.00 Sqm + Sch 'A' Part-III-6.00 Sqm=Total Qty =44.00 Sqm)

Supply and fixing 5 mm thick Sheet glass, ordinary quality and aluminium glazing cleats in square exc 0.5 sq. m in eachpane fixed to aluminum framing complete all as specified as directed. (Note : Qty of Sch 'A' Part-I-75.00 Sqm + Sch 'A' Part-III-11.00 Sqm=Total Qty =86.00 Sqm)

Supply and fixing 5 mm thick Sheet glass, ordinary quality and aluminium glazing cleats in square not exc 0.5 sq. m in eachpane fixed to aluminum framing complete all as specified as directed.

Supply and fixing Figured glass 5mm thick, pin head type and aluminium glazing cleats in squares n exc 0.5 sq. m in each pane complete, all as specified and as directed.

Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-79.00 Sqm + Sch 'A' Part-III-9.00 Sqm=Total Qty =88.00 Sqm)

Supply and fixing 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete, all as specified and as directed.

Supply and fixing for Solar control film 25 micron reflectivetype (gareware sun control or equivalent) in 3mm th sheet glass complete, all as specified and as directed.

Supply and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing complete, all as specified and as directed.

Supply and fixing of factory made solid panel PVC door shutter 30 mm thick(style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the styles &rails with suitable PVC sheet beading and joined together with solvent cement.fixed in the frame at site complete, all as specified and as directed.

S&F 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied complete, all as specified and as directed.

Supply and fixing of 40 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and as directed.

Supply and fixing of 35 mm thick Skeleton 2nd class hardwood,open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and itred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I complete, all as specified and as directed.

Supply and fixing stainless steel Butt hinges 100mm size fixed to PVC framescomplete, all as specified and as directed.

Supply and fixing butt hinges 125mm size medium weight, cold rolled mild steel, and fixed to wooden frames complete, all as specified and as directed.

Supply and fixing 100mm size aluminum handles, cast type anodised complete, all as specified and as directed.

Supply and fixing 150mm size aluminum handles, cast type anodised complete, all as specified and as directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 150mm long complete, all as specified and as directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 200mm long complete, all as specified and as directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt of length 200mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete, all as specified and as directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt of length 300mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy.

Supply and fixing double action spring hinge from door shutter and supply and fixing of new MS double action spring hinge,125mm size with steel wire spring ,stove enamelled black fixed to metal door frame by welding complete, all as specified and as directed.

Supply and fixing door closer hydraulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete, all as specified and as directed.

Supply and fixing 2nd class hardwood(Hollock) small fittings such as brackets of any type,latch and window stops & the like including all necessary labour,articles not exceeding 200 Cu cm each including 50mm long butt hinges,medium weight,cold rolled complete as directed.

Supply and fixing Aluminium power coated fancy type aluminium curtain rod 25mm dia incl PVC rungs @100mm C/C wutg globe type brackets matching to curtain rod complete, all as specified and as directed. MARVEL brand (legend series) manufactured by M/S Accumax interior products Pvt Ltd mumbai or equivalent as approved.

S & F for 2nd class hardwood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads Exc 6 & n exc 13 sq.cm complete, all as specified and as directed.

Supply and fixing 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete, all as specified and as directed.

Supply and fixing 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame workcomplete, all as specified and as directed.

S & F Continuous (piano) hinges,of 30mm flap mild steel, bright finish or electro galvanised complete, all as specified and as directed.

Supply and fixing Hasp and staple, 75mm size safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete, all as specified and as directed.

Supply and fixing extra over rates of block board or veneered particle board etc for external teak wood lipping, 6mm thick fixed with nails complete all as specified as directed

Supply and fixing Floor door stopper 150mm long of brass body and with hard drawn steel spring and tongue, fixed in floor complete all as specified as directed

Material and labour Cutting holes in brick walls exc. half brick but not exc.one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified as directed (Note : Qty of Sch 'A' Part-I-72.00 Each + Sch 'A' Part-III-30.00 Each=Total Qty =102.00 Each)

Material and labour 40mm thick providing cement concrete of type B-1, 1:2:4 (20mm graded aggregate) with water proofing compound @ 3% by weight of cement even and smooth without using extra cement complete, all as specified and as directed. (Note :water proofing compound cost will be measured separately) (Note : Qty of Sch 'A' Part-I-234.00 Sqm + Sch 'A' Part-III-89.00 Sqm=Total Qty =323.00 Sqm)

Material and labour providing 10mm thick cement plaster in CM 1:4 with water proofing compound @ 3% by weight of cement complete, all as specified and as directed. (Note :water proofing compound cost will be measured separately) (Note : Qty of Sch 'A' Part-I-234.00 Sqm + Sch 'A' Part-III-89.00 Sqm=Total Qty =323.00 Sqm)

Applying a coat of hot blown grade bitumen 85/25 @ 1.20 Kg / Sqm over plastered surface of roof slab after thoroughly cleaning and removing all loose particle, dust / dirt particles etc (Note :water proofing compound cost will be measured separately) (Note : Qty of Sch 'A' Part-I-234.00 Sqm + Sch 'A' Part-III-89.00 Sqm=Total Qty =323.00 Sqm)

Applying APP based polymeric membrane minimum weighing 3 Kg / Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms / sqm) land on primed surface by forced application complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-234.00 Sqm + Sch 'A' Part-III-89.00 Sqm=Total Qty =323.00 Sqm)

Material and labour hydraulically pressed burnt clay tile plain of size 200×200×19/20mm machine made laid over and including 15mm thick screed plaster in cement mortar(1:4) complete and compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete, all as specified and as directed.

Material and labour Providing, cement concrete Type B0 1:2:4 (12.5mm graded graded graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Supply only integral Water Proofing compound complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-155.00 Kg + Sch 'A' Part-III-62.00 Kg=Total Qty =217.00 Kg)

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting he same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete, all as specified and as directed.

Supply and fixing 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size:-

32 mm bore

25 mm bore

20 mm bore

Cutting chases in brick wall,girth not exceeding 10 cm for concealing water tubing and making good in cement mortar (1:3).

Supply and fixing PP-R Gate valves 32mm bore (brass insert) as per requirement of the site complete, all as specified and as directed.

Supply and fixing Stop valves 20mm bore, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete, all as specified and as directed.

Supply and fixing wall mixer and provision for overhead shower with 115mm Long Bend Pipe on upper side, connecting legs & wall flanges complete, all as specified and as directed. .Make : Jaquar (FUS-29273UPR) or equilavent as approved

Supply and fixing, bib taps,cast copper alloy,,chromium plated,fancy type with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed ,concealed of size 15 mm bore complete, all as specified and as directed.

Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete, all as specified and as directed.

Supply and fixing 15mm bore Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete, all as specified and as directed.

Supply and fixing Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern Fittings, Size: 385x720x715 mm, complete all as specified and directed. Make : Jaquar (ONS-WHT-10853S300UFSM)

Supply and fixing Hand shower health faucet with wall 8mm dia, 1.2 mtr long flexible tube & wall hook for EWC including hinges with complete fitting. Make : Jaquar (ALD-573) or equivalent as approved.

Supply and fixing 15mm bore fancy type chromium plated, bib taps, cast copper alloy, with 2 Way bib taps with wall flange ,screwed for iron pipe or for brass ferrule and fixed complete, all as specified and as directed. Make : Jaquar Alive 2 Way (VGP-81041) or equilavent as approved

Supply and fixing shower rose of continental series, Make : Jaquar ( CAT No. OHS – 1709 with sower arm CAT No. SHA-477) or equivalent as approved

Supply and fixing 32mm PVC waste pipe for wash hand basin., 900mm long complete, all as specified and as directed.

Supply and fixing under counter square type wash hand basin of size 425x425x145 mm complete, all as specified and as directed. Make : Jaquar (ONS-WHT-10901) or equilavent as approved

Supply and fixing CP brass liquid soap dispenser with glass bottle fixed with CP brass screws complete, all as specified and as directed. Make : Jaquar (AKP-35735P) or equilavent as approved

Supply and fixing CP brass toilet paper roller with flap fixed with CP brass screws ccomplete, all as specified and as directed. Make : Jaquar (AQN-7753) or equilavent as approved

Supply and fixing 15mm bore Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses,with or without lettered'Hot' or 'Cold' ,screwed for 15mm iron pipe and fixed complete, all as specified and as directed. Make : Jaquar (COP-167BPM) or equilavent as approved

Supply and fixing Brass square towel ring with and including CP brass screw complete, all as specified and as directed. Make: Jaquar (AKP-35721P) or equilavent as approved

Supply and fixing Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel complete, all as specified and as directed. .Make: Jaquar (ACN-1181FHS) or equilavent as approved

Supply and fixing Corner Glass Shelf with Bracket complete, all as specified and as directed. .Make: Jaquar (ACN-1173) or equilavent as approved

Supply and fixing Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete, all as specified and as directed. .Make: Jaquar (ALD-769L) or equilavent as approved

Supply and fixing 32mm dia CPVC Pipes & fittings on walls/ ceiling or laying in floors complete, all as specified and as directed.

Supply and fixing 75 mm PVC (SWR) floor trap plain with grating including jonting with solvent cement complete, all as specified and as directed.

Supply and fixing 75 mm CI Nahani trap with PTMT gratings(minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 complete, all as specified and as directed.

Material and labour MS flat iron small articles such as clamp, hold fast including bolts if required etc conforming to Fe.290. Gde-E-165 complete, all as specified and as directed.

Supply and fixing 1000 litres capacity rotational moulded polyethylene three layer water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part I complete, all as specified and as directed.

Supply and fixing Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete, all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete, all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete, all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) bends any radius complete, all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete, all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) vent cowl complete, all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete, all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete, all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) bends any radius complete, all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete, all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) vent cowl complete, all as specified and as directed.

SCH 'A' PART-II : DEMOLITION Demolition of RCC roofs, floors (other than ground floors), beams, stair case, landing, chajjas, Parapet and similar suspended works etc complete, all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete, all as specified and as directed.

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition of brick work or stone/boulder masonry,built in cement mortar or cement lime mortar including all quoins arches,pillars,etc complete, all as specified and as directed.

Taking up/down steel tubing 25-32mm dia of pipe and connections including cleaning for refixing or removal to store complete, all as specified and as directed.

Taking up/down steel tubing 40-50 mm dia of pipe and connections including cleaning for refixing or removal to storecomplete, all as specified and as directed.

Dismantling of Water tanks, open or closed, hoisted and re fixed in any position including cleaning/ removing any scale and dirt of capacity exc 500 litre but not exc 1000 litre complete, all as specified and as directed.

Dismantling wrought iron and mild steel work of any descreption not other wise provided for complete, all as specified and as directed.

Dismantling of tiles of any descriptions in floors or dados etc. including cement mortar bedding ( but not backing).

Demolition of AC/ CI pipe of 75 mm dia ,set in cement mortar,fixed in any position complete, all as specified and as directed.

Demolition of AC or Reinforced concrete) set in cement mortar pipe of 110 mm dia ,set in cement mortar,fixed in any position complete, all as specified and as directed.

SCH 'A' PART-III : GARAGE Hard core, broken stone/ boulder to gauge n exc 63 mm complete all as specified and as directed.

M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation

Material and labour 40mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in floor and finishing cement concrete surface even and smooth without using extra cement complete all as specified

Material and labour preparation of steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete, all as specified and as directed.

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete, all as specified and as directed.

Material and labour preparation of roof surface and applying two coats of aluminium paint over APP membrane complete, all as specified and as directed.

SCH 'A' PART-IV : RAFT FOUNDATION Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation ,etc and getting out in soft/dense soil complete all as specified and as directed.

All as per item No 134 here-in-before but exc 1.5 m deep complete all as specified and directed.

Hand packing broken stone or boulders (any thickness) at back of walls over arches etc. and raising (or lowering) to the required levecomplete all as specified and as directed.

Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregte) as in foundations, filling and mass concrete complete all as specified and as directed

Returning , filling in including spreading , levelling, watering and well ramming in layers not exe 25cm of soft/ loose soil. (Note : Qty of Sch 'A' Part-IV-124.00 Cum + Sch 'A' Part-VI-4.60 Cum=Total Qty =128.60 Cum)

Removing of excavated material 500m but not exec 1500 m and depositing where directed.

Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.etc fair finished complete all as specified

M&L for mild steel TMT bars 10 mm dia (CRS) and over cut to length bent to shape required including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

All as per item No 141 above but 5mm dia and over upto and including 10 mm dia (CRS) in stirrups, spacers and binders

Use and waste of form work to sides of concrete foundations , footing rafts, pile caps etc fair finished surfaces complete all as specified

SCH 'A' PART-V : INTERNAL ELECTRIFICATION Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

One light point, Fan point & call Bell, controlled by one way switch.

One 3 pin socket outlet, 5/6 amps, on independent board.

All as per item No 144 here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed. (Note : Qty of Sch 'A' Part-V-16.00 Per point + Sch 'A' Part-VIII-1.00 Per Point+ Sch 'A' Part-IX-4.00 Per point=Total Qty =21.00 Per Point)

S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed. (Note : Qty of Sch 'A' Part-V-16.00 Each + Sch 'A' Part-VIII-1.00 Each+ Sch 'A' Part-IX-4.00 Each=Total Qty =21.00 Each)

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed. (Note : Qty of Sch 'A' Part-V-16.00 Each + Sch 'A' Part-VIII-1.00 Each+ Sch 'A' Part-IX-4.00 Each=Total Qty =21.00 Each)

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals all as specified and directed.

S&F Modular White Cover Plate with Frame, 2 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and as directed.(Note : Qty of Sch 'A' Part-V-36.00 Each + Sch 'A' Part-VIII-1.00 Each+ Sch 'A' Part-IX-4.00 Each=Total Qty =41.00 Each)

S&F Modular White Cover Plate with Frame, 4 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 6 Module complete all as specified and as directed.

S&F Modular Metal Flush Box 2 module complete all as specified and as directed.

S&F Modular Metal Flush Box 3 module complete all as specified and as directed. (Note : Qty of Sch 'A' Part-V-36.00 Each + Sch 'A' Part-VIII-1.00 Each+ Sch 'A' Part-IX-4.00 Each=Total Qty =41.00 Each)

S&F Modular Metal Flush Box 4 module complete all as specified and as directed.

S&F Modular Metal Flush Box 6 module complete all as specified and as directed.

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 6 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 6 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Supply & fix LED tube light Fitting SmartBright extruded aluminium batten available in 4 ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Philips Cat Part No BN021LED40S-6500PSU GR (4 ft) Eqv Crompton/ Havells

Supply & fix LED tube light Fitting SmartBright extruded aluminium batten available in 2 ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Philips Cat Part No BN021C LED22S PSU CW GR Eqv Crompton/ Havells

S&F flush mounting factory made Ekinoxe SPN DBs Double door IP-43 protection, IK-09 with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 12 way, all as specified and directed cat No 607711 make -Legrand or Equivallent Make of Siemens/Schneider.

Supply and fix MCB single pole and neutral, 240 volts, 32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed. Make : Legrand /Siemens/Schneider

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series all as specified and directed. Make : Legrand or eqvt in Siemens/Scheinder

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

Supply and fix heavy duty exhaust fan of 300 MM sweep,Turbo Force SP (Heavy duty ) single phase 230/240 Volts,, AC supply, 1400 RPM complete and making holes with louvered shutters including mounting frame and connecting the fan to celing rose including provision of three core flexible copper conductor cable of size 1.5 Sqmm copper including to inside out surface & white wash etc with not less than 0.5m long to connection complete all as specified and directed. Make-Havells/Usha/Khaitan/Orient

.Supply and fix MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one MCB single pole 20 amps, 240 volts.

Supply and fix factory made V TPN DBs for MCCB Incomer, IP-43 protection with metal double door with suitable Size copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of 100 Amps MCCB as incomer and included with SP/TP MCB's as outgoing 4 way 100 A MCCB+12 etc complete all as specified and directed Make-Schneider Cat part No A9HVD04L suitable for 100 Amps MCCB as incomer & 12 Nos SP Out going /Siemens/Schneider.

Supply and fixing MCCBs 100 Amps capacity, 415 volts, 4 pole, 25 KA, thermal magnetic complete all as specified and directed Make Legrand/Siemens/Schneider

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 4 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 4 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with BLDC motor complete all as specified and directed Make: Havells/ Usha/Crompton

Supply and fixing of Modular Fan regulator,120 watts (Make : .Crabtree/Cona/Havells)

S&F Bell push Switch, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells.

S&F Call Bell ,Ding-Dong ,single pole, AC, 230 Volts complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells.

S & F temper proof single phase energy meter (KWH) upto 30 Amps, 230 volts, digital display complete all as specified and directed

S & F 4 mm dia GI wire to connected building earthing to MCB DB Box complete all as specified and directed

SCH 'A' PART-VI : EXTERNAL ELECTRIFICATION Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out in soft soil for laying of cables, foundation of poles, and stay assembly complete all as specified and directed.

Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed.

S&L well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete.

Removal of excavated soil to a distance not exceeding 50 Mtr depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core

Supply and Fix MCCB 415 Volt 16 KA 4 Pole, 100 Amps in existing panel as outgoing complete all as specified and directed.

SCH 'A' PART-VII : EXTERNAL WATER SUPPLY Supply and Laying GI pipe medium grade with fittings laid in trench all as specified and directed of the 50 mm bore of pipe

Supply and Laying GI pipe medium grade with fittings laid in trench all as specified and directed of the 25 mm bore of pipe

Supply and Fix Gun-metal, gate valves, of size 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

Supply and Fix Gun-metal, gate valves, of size 50 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

M & L Cutting existing steel tubing for alterations or additions (Each cut measured)

M & L Screwing existing steel tubing for alterations or additions (for GI tubing 50 mm dia bore

SCH 'A' PART-VIII : WATER COOLER Supply, installation, commissioning of Water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40 Ltr. Make : Blue Star /Voltas

S&F automatic boost/buck transformer for low and high voltage correction, equipped with electronic transistorised relay suitable for correction with voltmeter and designed for input volts 175V to 250 Volts and output voltage stabilised between 215 to 240 volts of capacity 1 KVA complete all as specified and directe. Make : V-Guard/Microtek/ Blue line

SCH 'A' PART-IX : HOT WATER SUPPLY Supply, installation, commissioning and testing of 25 Litres capacity water heating system, storage type (GEYSER) ISI maked, electrical single phase, 230 volts, 50 Hz, BEE 5 star energy saving rated having stainless steel tank, metallic body and including making electric connection and grouting of bolts Pipe connections etc. as required at site complete all as specified and directed. Make: Havells Cat Part No GHWAICTWH025/Usha/ Racold

NARESH KUMAR BEHERA

RANA ENTERPRISES