Construction of Bridge over Sukkar Khad to connect village Khatwin

Amount

Earth work in excavation for foundation of bridge structures like abutment in all type of classification of soil comprising ordinary rock, hard rock, chiseling/wedging out of rocks (where blasting in prohibited) as per drawing and MORD technical specifications section 1200 and as per direction of the Engineer-In-Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious material and disposal upto all leads and lifts including dressing of side bottom and pumping, bailing out water (surface and sub-soil water) upto all depth any quantum of water including cleaning of slush which may arise out during dewatering including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete in open foundation for all type of structures complete of plain cement concrete nominal mix 1:3:6 (one cement: three sand :six graded crushed stone aggregate) 40mm (Forty millimetre) nominal size in or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawing and MORD technical specification sections 802,803,804,1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work in Sub-Structure upto all heights using High Strength OPC confirming to IS: 8112 or 269 ( Latest edition) cement content as per approved design mix, including pumping of concrete to site of laying and cost of centering, shuttering, but excluding cost of reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard /setting of concrete to improve workability without impairing strength & durability and finishing complete as per direction of Engineer-in-charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-35 grade cement concrete for reinforced cement concrete work in Sub-Structure upto all heights using using High Strength OPC confirming to IS: 8112 or 269 ( Latest edition) cement content as per approved design mix; including pumping of concrete to site of laying and cost of centering, shuttering, finishing but excluding the cost of reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard /setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement ( Fe 500) cofirming to IS: 1786 ( Latest Edition) of TATA/SAIL/JINDAL PANTHER make in sub-structure upto all heights including cost of binding wire and cost for cutting, binding, bending and placing in position of bars complete as per drawing no PW/CE-(HZ)/ Sukkar Bridge -1/2020-45/R and MORD technical specifications Sections 1001 & 1206 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Back filling Granular Material in boxes of abutment, wing walls and return walls to the full height complete as per drawings & technical specification Clause 1204.3.8. and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying of filter media with granular crushed aggregates as per drawings & technical specification Section 1204.3.8 of MORD and satisfying the requirements laid down in specifications to a thickness of not less than 600mm ( six hundred milimetre ) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level elastomeric Neoprene bearing conforming to IRC-83 (Part-II) Section IX and Section 1402.4 MORD Specifications ( Latest) complete including all accessories as per drawing and technical specification and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing weep holes in brick/stone masonry/plain/reinforced concrete abutment , wing walls and return walls with 100mm (One hundred millimetre) dia AC pipe extending through the full width of the structures with slopes of I (V):20 (H) towards drawing face complete as per drawing and technical specification Sections 614,709, 1206.6 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Furnishing and placing Reinforced/Prestressed cement concrete in position machine batched and machine mixed design mix M-30 (M-Thirty ) grade cement concrete for work upto all heights using High Strength OPC confirming to IS: 8112 or 269 ( Latest edition) in super-structure as per drawing and Technical Specification Clause 1401 of MORD (Latest Edition) for T-beams, Girders, slab of bridge and approach slab including the cost of centering, shuttering and finishing ; and excluding cost of reinforcement ; and including admixtures in recommended proportions as per IS: 9103 to accelerate, retard /setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying reinforced cement concrete mechanically mixed and vibrated of design mix and minimum compressive strength of grade M-30 grade (M-Thirty) in wearing coat with graded crushed stone aggregate 20mm (twenty milimetre ) nominal size ,High Strength OPC confirming to IS: 8112 or 269 ( Latest edition) cement content including cost of form work curing and cost of reinforcement for wearing coat complete complete as per drawing and Technical Specifications and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of RCC railing of M-30 Grade (M-Thirty) in situ with 20mm (Twenty millimetre) nominal size aggregate and High Strength OPC confirming to IS: 8112 or 269 ( Latest edition) cement content, true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500 (One in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimetres), leaving adequate space between vertical post for expansion, compete as per approved drawings and technical specifications as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement ( Fe 500) cofirming to IS: 1786 ( Latest Edition) of TATA/SAIL/JINDAL PANTHER in Super Structure upto all heights including cost of binding wire; and cost for cutting, binding, bending and placing in position of bars complete as per drawing no PW/CE-(HZ)/ Sukkar Bridge -1/2020-45/R and MORD technical specifications Sections 1001 and 1401 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I.drainage spouts complete as per drawing and technical specifications as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying a burried expansion joint, expansion gap being 20mm (Twenty millimetres) covered with 12mm (Twelve millimetres) thick, 200mm (Two hundred millimetres) wide galvanized wieldable structural steel plate and as per IS: 2062 ( two thousand sixty two ) placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8mm (Eight milimetre) dia 100mm (One hundred millimetres) long galvanized nails spaced 300mm (Three hundred millimetre) centre to centre along the centre line of the plate, all as specified in clause 2604. including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required line, grades width cutting and trimming of side slopes and level as shown on the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful material and stacking the same in all leads and lifts in acquired width of the road and transportation of serviceable material for filling in road ways, camber, embankments for grade improvements and disposal of all un-useful surplus material to required width of the road or to approved dumping sites by Engineer-in-Charge through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling fine dressing and carriage of machinery, material, tools equipments and safety measures and incidentals. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of materials within all leads and lifts. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earth work in in excavation for all type of road structure such as retaining walls,breast walls,culverts,drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks,chiseling /wedging out of rock (where blasting is prohibited) as per drawing and MORD technical specification Section 305 and as per direction of the Engineer-in-Charge including setting out, construction of shorting and bracing , removal of stumps and other deleterious materials and disposal of materials upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (one hundred fifty millimetre) compacted thickness including shsorting and strutting and pumping and bailing out water(surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of embankment with approved material obtaind from borrow pits with all lifts, upto all height and depth, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 within all leads and lifts as per drawing and MORD technical specification Section 301.5 including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete for plain/reinforced concrete mechanical mix and vibrated in open foundation, retaining walls, wing walls etcetera like structures complete as per drawings nominal mix 1:5:10 (One cement : five sand : Ten crushed graded stone aggregate) 40mm (Forty millimetres) nominal size including cost of form work and curing complete as per HPPWD specification complete in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 110mm ( One hundred ten) dia PVC pipe Finolex/ Supreme having pressure not less than 4.00 Kg/Cm² ( four kilogramm ) per centimetre square extending through the full width of the structure with slope of 1(V):20(H) ( one vertical : twenty horizontal ) towards drawing face complete as per drawing and MORD technical specification Section 614, 709, 1204.3.7 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Loosening of the ground upto a level of 300 mm ( three hundred milimetre) below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per MORD Technical Specification Section 303 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of sub-grade and earthen shoulder with approved material obtained from borrow pits with in all lifts and leads transporting to site, spreading, grading to required slope and compacted to meet requirement of Tables 300.2 with in all leads and lifts as per MORD Technical Specification Section 303 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of granular sub-base by providing well graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site upto all leads and lifts and spreading in uniform layers with motor grader on prepared surface and compacting with smooth wheel roller to achieve the desired density, complete as per MORD Technical Specification Section 401 for Grading-I materials per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN ( eighty into hundred )weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetera as per Tables 400.11 & 400.12 and MORD Technical Specification Clause 406 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with bitumen Emulsion (SS-1) of IOCl / HPCL / BPCL make on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.90 to 1.20kg/sqm (Zero point nine zero to one point two zero kilogram per square metre ) using mechanical means as per MORD Technical Specification Section 502 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-1) of IOCl / HPCL / BPCL make using emulsion distributor at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram) per square metre on prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD technical specification Section 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying and rolling of open-graded premix carpet of 20mm (Twenty millimeters) thickness compected thickness composed of type-A 13.2mm to 5.6mm (Thirteen point two millimetre to five point six millimetre) aggregates at the rate of 0.27 cum (Zero point two seven cubic metre) mixed with using VG-30 paving bitumen of IOCl / HPCL / BPCL make at the rate of 14.6kg (Fourteen point six kilogram) per ten square metre of road surface to required line,grade and level to serve as wearing course on a previously prepared base including mixing and heating binder and aggregate in a suitable plant, laying with paver finisher and rolling with a three wheel 80-100 KN static capacity road roller finished to required level and grade to be followed by seal coat as per MORD technical specification Section 506 including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-B as per MORD Technical Specification Section 508 using VG-30 paving bitumen of IOCl / HPCL / BPCL make at the rate of 6.8 kg (six point eight kilogram) premix with 0.06 cum (Zero point zero six cubic metre) of fine aggregate per 10sqm (Per ten square metre) heated in mini hot mix plant and laying mechanically of mixed material and rolling with power road roller 80-100 (Eighty to hundred) kN capacity as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax or other taxes imposed by the Government.

ASHOK KUMAR THAKUR GOVT CONTRACTOR

Anil Thakur

M.S JAGDISH CHAND GUPTA

Kuldeep Chand Rana

M/S STRIKER & BROS