REPAIR/MAINT OF INTERNAL ELECTRIFICATION WORK FOR

Amount

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge.

Material and labour for providing point wiring for One light point controlled by one, one way switch with using 1.50 sq.mm (nominal area), stranded copper conductor, single core PVC insulated flame retardant unsheathed cable (Maintaining Colour Code) 1100 volts grade with and including PVC casing and capping (size of casing caping as required at site but not less than 20mm) of suitable size including PVC accessories / fittings and fixtures fixed on surface with using new PVC board or sunken type pressed steel box of adequate size, terminal boxes for mounting fittings/junction boxes with and including all accessories and using 1.5 sq.mm (nominal area), stranded copper conductor, single core PVC insulated flame retardant unsheathed cable green in colour as in earth continuity conductor connected to common earth dolly and connecting upto fittings complete all as specified and directed. NOTE: The quoted rates shall be inclusive for fixing casing caping to surface with using PVC raw plugs and provision of PVC boards/terminal/junction boxes of any shape and size.

All as per above item no 2.00 but for One fan point controlled by one, one way switch.

All as per above item no 2.00 but for One socket outlet 3 Pin, 6 Amp on independent board.

All as per above item no 2.00 but for One socket outlet 3 Pin, 6 Amp on same board.

All as per above item no 2.00 but for One bell point controlled by one bell push.

Material and labour for providing point wiring by using cable of size 2.5 sq.mm (nominal area) single core PVC insulated flame retardant un-sheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade with and including PVC casing capping as requered at site but not less than 20 mm including suitable accessories and fittings/fixtures and PVC box as required at site for mounting switches, sockets, etc. for one socket outlet 3/6 pin 15 amps including 1.5 Sq.mm PVC insulated unsheathed multi-stranded flame retardant copper conductor cable green in colour for earth continuity & connected to common earth dolly complete all as specified & directed.

S&F for switch paino flush type 5 Amps single pole one way 230 volts AC circuit complete all as specified and directed.

S&F for bell push flush type 5 Amps single pole 230 Volts AC Circuit complete all as specified and directed.

S&F call bell AC 230 Volts single pole complete all as specified and directed.

S&F for socket outlet 2 in 1, 3 pin 5 Amps flush type 230 volts AC circuit on same board complete all as specified and directed.

S&F switch socket combination 2 in 1, 3/5 pin 5/6 Amps 240 volts flush type multipurpose complete all as specified and as directed.

S&F switch socket combination 2 in 1, 5/6 pin, 5/6 Amps and 15/16 Amps flush type 240 Volts universal complete all as specified and as directed.

Supply and fix Electronic fan regulator 230 volts , step type,socket type ,hum free 120 watt ISI Marked,including taking down unserviceable.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body (ISI Marked)

Supply & fixing PVC poly carbonate round blocks 10 cm dia.

Supply & fix modular switch one way 6 Amps 1 module.

Supply & fix modular switch socket outlet,5 pin 6 Amps flush type 2 module.

Supply & fix modular switch one way 16 Amps 1 module

Supply & fix modular switch socket outlet,5 pin 16 Amps flush type 2 module.

Supply & fixing modular Fan step regulator, 120W - 2 module all as directed by Engineer-in-Charge

Supply & fix modular blank plate 1 module

S & F Modular type White cover plate with frame 3 module

S & F Modular type White cover plate with frame 4 module

S & F Modular type White cover plate with frame 6 module

S & F Modular type White cover plate with frame 8 module

S & F Modular type Metal Flush box 3 module

S & F Modular type Metal Flush box 4 module

S & F Modular type Metal Flush box 6 module

S & F Modular type Metal Flush box 8 module

M&L for providing sub main wiring with two single core 6.00 Sqmm (nominal area) PVC Insulated flame retardant unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC casing-capping complete including 4.00 Sqmm PVC insulated unsheathed multi stranded flame retardant single core copper conductor cable for earth wire including taking down/removing old one and making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note : (i) Two runs of single core 6.00 Sqmm multi stranded copper cable and one run of 4.00 Sqmm earth wire and one run of casing caping shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the casing capping.

M&L for providing sub main wiring with two single core 4.00 Sqmm (nominal area) PVC Insulated flame retardant unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC casing-capping complete including 2.50 Sqmm PVC insulated unsheathed multi stranded flame retardant single core copper conductor cable for earth wire including taking down/removing old one and making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note : (i) Two runs of single core 4.00 Sqmm multi stranded copper cable and one run of 2.50 Sqmm earth wire and one run of casing caping shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the casing capping.

S&F PVC/polycarbonate Angular lamp Holder insulated body with back plate angle type suitable for batten complete all as specified and directed by Engr-in-charge .

Supply only LED Blub 10 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K with fitting complete all as specified and directed.

Supply and fixing LED Tube light fitting 18 watt 4 feet pre coated CRCA body heavy duty Industrial Batten suitable for Retrofit LED Tube 18watt including LED tube rod 20 watt self ballasted retrofit lamps with thermoplastic body 270 degree wide distribution CCT 6500 K Cat Part No for LED Tube Rod 18 watt PHOTONULTRA +1213T8SSTL18WLED865SPC and Batten Cat part No REGALBATTENT 5UPTO1X18WDSBSWH or including fitting fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of size 23/0.0076 including taking down old unsv tube light fitting and making necessary connection complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures etc complete from existing main boards and removing from site all complete all as directed.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 8 way (2 + 6 way) single pole and neutral link complete all as directed by Engineer-in-Charge.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 4 way (2 + 2 way) single pole and neutral link complete all as directed by Engineer-in-Charge.

Supply and fix MCB single pole and neutral (SP&N) 25 to 32 Amp 240 volts 10 KA 'C' series with all incoming/outgoing connections with proper size lugs including taking down old unserviceable one complete all as specified and directed.

S&F MCB single pole (SP) 6 to 32 Amp 240 Volts 10 KA 'B' series with all incoming/outgoing connection with proper size lugs including taking down old unserviceable complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed by Engineer-in-Charge.

Taking down old unserviceable bulk head and supply and fix 10 watt LED Bulk head fitting in engineering plastic housing with clear prismatic diffuser complete with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable Switch fuse unit and supply and fixing switch fuse unit 32 Amp triple pole and neutral switch fuse unit with rewirable porcelein fuse unit with side handle and in sheet inclosure Cat Part No HBRSE2032 of Make Havells or equivalent in Standard/L&T all as directed by Engr-in-Charge.

Taking down old unserviceable change over switch and supply and fixing onload change over switch AC-23, 32 Amp four pole 415 Volt with side handle and in sheet inclosure Cat Part No IHOFFE0032 of make - Havells or equivalent in Standard/L&T all as directed by Engr-in-Charge.

S & F Aesthetically designed 1x1 LED light 15W flat panel square type for recess mounting which provides soft-light and glare free symmetrical illumination. Make:havells/Crompton/Philips/Bajaj

Supply and Fixing 36 Watt LED fitting back lit panel having white polycarbonate body & aluminium plate heat sink, high quality PMMA and HPF driver suitable for armstrong/grid ceiling,fixture size 595x595 mm,powder coated aluminium extruded housing including LED driver and lamp and fixing in recess ceiling with suitable size of aluminium strip as required for fixing of LED fitting with all accessories prewired and connecting up with 3 core twisted flexible copper conductor cable of size 23/0.0076 including taking down old unserviceable fitting complete all as specified and directed. MAKE : Crompton Greaves cat part No LCPL-36-CDL(2x2) or equivalent in Bajaj/Philips/Havells

S & F LED building security light fitting 25W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOPOPENINg seperate driver compartment with IP65 protection and impact resistance of IK07. Make: Havells or equivalent in polycab/philips/crompton

ms singh construction

RC CONSTRUCTION

Bimal Trading Company

FREEZCON

Kaushik Enterprises

STANDARD ELECTRIC WINDERS

MAZUMDAR ENTERPRISE

M/S A K BROTHERS