SPECIAL REPAIR TO CERTAIN TOILETS AT KLP, LIBRARY, FCTS AND ADDN/ALTN TO TOILET OF DSC GUARD ROOM INCLUDING PROVN OF LADIES TOILET AT MCTE UNDER AGE B/R-IV OF GE MCTE MHOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per item No.3 here-in-before but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles, complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles, complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 600 x 7 to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles, complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of size 600 x 1200 x 8-10mm thick in vertical surfaces, as in wall etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles, complete all as specified and directed.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MoD land, complete all as specified and directed.

M & L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each, complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises, complete all as specified and directed.

Taking down Shutters of any description exc. 1 sqm but n. exc 2 sqm each of any description, complete all as specified and directed.

S&F of Solid PVC door frame of size 50mm x 47mm made out of 5mm thick of Plain colour PVC sheet reinforced with M.S. Square tube fixing in opening as per specification & drawing and complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube fixing in opening as per specification & drawing and complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 150mm size aluminium, anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F 100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, gates etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide, complete all as specified and directed.

S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall and making good etc complete all as specified.

Hacking out old broken glass (any tickness, size,quality or description) from wooden/ steel framesglazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete including necessary wooden beading all around and as necessary, complete all as specified and directed.

S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc, complete all as specified and directed.

S & F of Powder coated aluminum three track sliding shutters two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces. (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter - 01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall - 06 No per window.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed.

S&F in repair Vitreous china, wash down water closet pan Single piece WC with UF seat cover, hinges fixing acessories set cisteren fittings, rim less tornado flushing complete all as specified and directed.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs, complete all as specified and directed.

S & F in repair vitreous china squatting pan `Orissa` pattern, size 580 x 440mm white with integral foot rests (Excluding flushing cistern and flush pipe), complete all as specified and directed.

S&F in repair Vitreous China under counter basin (Wash basin) oval shape size 190 x 550 x 430mm with brass coupling and suitable Outlet PVC waste pipe, complete all as specified and directed.

S&F in repair Vitreous China table top basin (Wash basin) size 380 x 480 x 140mm with brass coupling and suitable Outlet PVC waste pipe complete all as specified and directed.

S&F in repairs vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe, complete all as specified and directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm, complete all as specified and directed.

S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.

S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specifed and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

S&F in repair 15mm dia brass chromium plated swan neck pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed.

S&F in repair 15mm dia brass chromium plated single lever tall boy basin pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe, complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed.

S & F in repairs Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing, complete all as specifed and directed.

Supply, laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors, complete all as specifed and directed.

Fixing only old 15mm GI tubing and connection in new or old position in wall/ floor etc including GI fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc, complete all as specified and directed.

M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F, laying and testing for 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

Fixing only old 20mm GI tubing and connection in new or old position in wall/ floor etc including GI fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc, complete all as specified and directed.

Dismantling PVC water tanks 1000 litres capacity, complete all as specified and directed.

Dismantling PVC water tanks 500 litres capacity, complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position, specified in SSR Part-I, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and directed.

S & F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and directed.

S & F in repairs Toielt Paper Holder Stainless Steel fixed to wall al as specifed and directed by Engr-in-Charge.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook, complete all as specified and directed.

S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed.

S & F in repairs 32/40mm PVC down pipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc, complete all as specified and directed.

S&F in repair Vitreous China Urinal Pot of size 245 x 320 x 560mm Half Stall white colour of premium quality including all fittings like CP coupling, CP brass urinal spreader etc, complete all as specified and directed.

S&F Brass Bottle Trap 300mm (12") Designer wall connection pipes and wall flange complete all as specified and diretced.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement, complete all as specified and directed.

M&L for prepration of new wall surfaces & applying birla/ J.K. wall care white putty 2mm thick for levelling the surfaces and applying two coat of interior emulsion distemper over a coat of primer including preparation of surfaces etc, complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling, chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed.

M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling, complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed.

M&L for Prepration of new surfaces and applying two coats exterior weather coat over one coat of exterior primer including 2mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from wall by scrapping of surfaces of old decorated walls etc, and applying Birla/ J.K. wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed.

M&L for complete removal of existing treatment from walls by scrapping & washing etc and applying Birla/ J.K. wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface, complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface, complete all as specified and directed.

S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete as per manufacture's specification and complete all as specified and directed by Engr-in-Charge

S&F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc, complete all as specified and directed.

S&F Brass handles 100mm size, cast type, polished bright as approved by Engr in Charge, complete all as specified and directed

S&F of 40mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised, complete all as specified and directed.

S&F of Self closing hinges for cupboard etc, complete all as specified and directed.

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter, complete all as specifid and directed.

S&F in repair Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed..

S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single soketed in any length with adhesive joint fixed to floor or trenches including fittings, complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall, complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings, complete all as specified and directed.

S&F in repairs PVC floor trap, with grating 75mm including jointing to waste pipe fixed in cement concrete 1:2:4, type B1, including waterleak proor treatment, complete all as specified and directed.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed.

S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore, complete all as specified and directed.

S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore, complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs, complete all as specified and directed.

M&L for suspended false ceilling comprising of 4mm thick non asbestos fibre cement bulding boards of size 595mm x 595mm ‘E’ Board Classic Design Lake & hill including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick, bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/ steel purlin/ rafter for suspending grid frame work of size 605mm x 605mm suspended with 4mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mm x 24mm x 0.60mm, cross runner tee 37mm x 24mm x 0.60mm and perimeter angle of 24mm x 24mm x 0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed

M&L for 10-12mm thick decorative plaster of paris false ceiling bending/ moundling as required shape with two coats of plaster emulsion paint over a coat of primer on decoratived surfaces of ceiling including 26 gauge galvanished iron sheet 'C' shaped main member @ 750mm C/C cross member 'U' shape @ 450mm c/c and perimeter of 'C' shaped GI wire 6mm dia or more or FI 40 x 4mm thick for hanging arrangement with MS suspension fastner spaced @ 450mm C/C in both direction and 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 mtr height as required at site complete all as specified and directed.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site complete all as specified and directed.

M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4, type B-0, using 12.5mm graded stone aggregate, finished surface rough to receive tiles, complete all as specified and directed.

Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m, complete all as specified and directed.

M&L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as specified and directed.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-40 grade laid dry in floor/ path with and including 50mm thick (Compacted thickness) crushed stone sand cushioning, complete all as specified and directed.

S&F in repair 100mm long aluminium anodized hasp & staple, safety type, with mild steel hinge pin including bolt to hinge plate, fixed with screws, complete all as specified and directed.

Dismantling Plain or Corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern Roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for rolled section/ hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting, connecting to gusset plate etc, complete all as specified and directed.

Waterproofing treatement of sunken portion after removing old treatment is as follows :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion including vertical wall surface complete as directed. (ii) M&L for water proofing plaster for sunken portion in CM 1:3, 20mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (iii) M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces. (iv) M&L for PCC 1:7:12 type D2 using 40mm graded stone aggregate as in filling (sunken portion). etc. (v) M&L for 75mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as in sub base. Note:- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect. (b) The sunken portion shall be tested for leakage/ seepage/ dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage/ seepage/ dampness is eliminated. (c) Horizontal flat area to be measered.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out hard/ dense soil, complete all as specified and directed..

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. and getting out in hard/ dense soil, complete all as specified and directed.

M&L for RCC (nominal mix) Type A-1 1:1.5:3 (20mm graded aggregate) for foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under remaed piles and mass concrete, complete all as specified and directed.

M&L for RCC (nominal mix) Type A-1 1:1.5:3 (20 mmgraded aggregate) for columns, pillars, piers, posts and struts, complete all as specified and directed.

M&L for RCC (nominal mix) Type A-1 1:1.5:3 (20 mmgraded aggregate ) for beams, cantilevers, bressummers, lintel over 1.5 m span, struts, bands, complete all as specified and directed.

M&L for RCC (nominal mix) Type A-1 1:1.5:3 (20 mmgraded aggregate) for slabs supported on walls, beams and column in floors, roofs, alndings, blaconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip), complete all as specified and directed.

M&L for mild steel TMT Bars 6mm to 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90mm dia or securing with chip), complete all as specified and directed.

All as per item No.119 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter with rough finished sufraces of concrete, complete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions with fair finished surfaces square, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves includings supports, overhangs, etc also splays between floors and beams etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Earth filling with approved soil/ morooum brought from out side MoD land, filling in trenches or paving laid in layers not exceeding 25 cm thick spread, levelled and rammed including watering etc complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D-2, (using 40mm graded stone aggregates) in sub base of floor complete all as specified and directed.

Returning fillng in, including spreading, levelling, watering and well ramming in layers not exc 25cm, complete all as specified and directed.

Removing excavated material exc 1.5 km but n exc 5 km away from MoD Land from the starting point, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for seprately as supply only under respective item.

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for Rendering 5mm thick on fair faces of concrete ceiling, chajja surfaces in cement mortar 1:3 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces and applying two coat of oil bound distemper with roller on new treated surfaces of wall incl primer etc complete all as specified and directed.

S&F Stainless Steel butt hinges, 100mm long, complete all as specified.

S&F of vitreous china sqatting pan (orissa pattern) size 630mm x 450mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) including S or P trap, complete all as specified and directed

S&F for Towel Ring of brass chromium plated fixed with and including SS screws and wooden/ plastic cleats complete all as specified and directed.

S&F Stainless steel Towel Rail 600mm long fixed with and including SS screws and wooden/ plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S&F Stainless steel Grating doom 100mm dia, complete all as specified and directed.

S&F Shower arm 15mm size, 195mm long with bend of 45 degree with flange complete all as specified and directed.

S&F Stop/ angle cock 15mm bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

S&F for chromium plated brass wall mixer 3-in-1 fancy type with provison for overhead shower complete with wall flange (without over head Shower) screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F Stainless Steel Soap Dish fixed to wall with ss screws including wooden/ plastic cleats, complete all as specified and directed.

Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, table top for wash basin, urinal partition, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess incl fixing hold fast with PCC 1:2:4 (12.5mm graded stone aggregates) including all fittings, accessories etc, complete all as specified and directed.

M&L for Water proofing on roof/ parapet with the follwing steps: STEP-1. Firstly to cleain the existing surface of the roof peparation and making the surface dust free. STEP- II. Crack more then 0.5mm the opening of crack in V grove and filling with epoxy mortor. STEP-III. Initial coat (mixed 1/2 liter of water in 1 liter of Roof seal of approved make as a primer (Area cover 1 liter=9-1 sqmtr) STEP-IV. After six hours of primer, apply first coat (one coat) of roof seal of apprved make in a particular direction without mixing of water. Now left it for six hours (At the rate 0.70-0.75 litre per Sqm). STEP-V. Lay down a 45 GSM fiber glass mesh into the coating as a sandwich layer while the first coat is still wet. STEP-VI. After again six hours of first coat and apply the second coat of Dr.Fixit Roof seal in a other direction without mixing of water (At the rate 0.70-0.75 litper Sqm). Now left it 24 hours. complete all as specified and directed by Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers of authorised applicator of manufacturer.

S & F under counter ivory wash basin, vitreous china size 560 x 410 x 180mm including cutting for and pinning in ends of brackets or erecting stand incl waste coupling and brackets, waste pipe, Rag Bolt Assy 3/8" etc, complete all as specified and directed.

S&F for chromium plated brass pillar tap without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F two way Angle cock with Flange 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure complete all as specified and directed.

S&F Health Faucet ABS with 1.00 m Long Flexible Tube & ABS Wall Hook complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps, complete all as specified and directed.

All as per item No.151 here -in-before but laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps complete all as specified and directed.

All as per item No.153 here -in-before but laid in trenches or in floors complete all as specified and directed.

S&F in PVC (SWR) bends 110mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal 110mm dia, complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

Supply only integral water proofing compound, compete all as specified and directed.

M&L for preparation of new plastered surfaces of exterior wall and applying two coats of cement base paint including priming the surface, complete all as specified and directed.

S&F butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed, type C-21 of size 100mm, complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc 63mm, depositing spread and levelled in layers n. exc 15 cm thick, watered and rammed to a floor/ true surface, complete all as specified and directed.

M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate) in top layer of floor to be finished even and smooth with using extra cement, complete all as specified and as directed.

S&F of vitreous china squatting pan `Orissa` pattern, size 580 x 440mm white with integral foot rests (Excluding flushing cistern and flush pipe), complete all as specified and directed.

S&F of vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed.

S&F low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe etc, complete all as specified and directed.

S&F of chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F vitreous china, white, wash hand basin, with pedestal, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in including waste pipe, complete all as specified and directed.

S&F 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S & F 32/40mm PVC down pipe for kitchen sink fittled to Kitchen Sink including brackets of suitable size etc complete all as specifed and directed by Engr-in-Charge.

S&F 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F 15mm dia bib tap swan neck, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F Stop/angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook, complete all as specified and directed.

S&F brass butterfly jet spray with 1.2 meter long flexible tube of premium quality fitted to vitreous china, wash down water closet pan (pedestal pattern) complete all as specified and directed.

S&F 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S & F Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge .

S&F 15mm dia brass chromium plated swan neck pillar tap, fancy type with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed.

S&F 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

S&F Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron clamps etc complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall with iron clamps, complete all as specified and directed.

S&F for 75mm dia PVC (SWR) floor trap with grating including jointing with solvant cement including PCC 1:2:4 and making good the existing floor complete all as specified and directed.

M&L for 10mm thick screed bed on concrete surface in CM (1:3) finished even and smooth without using extra cement, complete all as specified and directed.

M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm. The height of the roof may upto 9m comprising with following items complete all as specified and directed:- (i) The surface of roof parapet and gutters drain mouth etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brush and dusting. (ii) Oil based bitumen primer conforming to [email protected] per Sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.2 Kg/Sqm. (iv) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster centre core which is sandwiched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps as per manufacterer's instruction etc. (v) Applying one coat of hot blown bitumen of 85/25 grade @ 1.2 kg/Sqm. (vi) Applying two coats of bituminous paint @ 200gm/Sqm (minimum) Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

Taking down carefully copper/ alluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendens, rgulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed.

Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down ceiling fan/ exhaust fan/ of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M No-III Mhow and refixing the same after completion of work including overoiling and painting work complete all as specified and as directed.

Taking down carefully TPN DB/ SPN DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down carefully light fitting any type for refixing OR taken in schedule of credit all as specified and as directed.

Taking down existing old unserviceble LT UG/ service cable of any descrition and size complete all as specified and directed.

M&L for concealed point wiring with PVC insulated and unsheathed, single core FRLSH cable of size 1.5 sqmm stranded copper conductor, 1100 Volt grade, drawn into and including PVC rigid conduit not less than 20mm dia, medium grade, ISI marked with and including 1.5 Sqmm unsheathed green colour stranded copper conductor FRLSH cable for continuous earth wire and including sunken pressed steel concealed terminal boxes of suitable size made out of 1.2mm thick sheet covered with 2.6mm thick white hylam sheet cover of suitable size for mounting switches/ sockets/ fan regulators or Modular flush box for mounting modular switches/ sockets/ regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified & directed for the following:-

(a) One light/ fan point controlled by one switch complete all as specified and directed.

(b) One socket outlet 2/3 pin 5 Amp, multipurpose on same board with other switches complete all as specified and directed.

(c) One switch/ socket outlet point 2/3 pin 5 Amp multipurpose on independent board complete all as specified and directed.

All as per Item No.194 above, but with FRLSH cable 2.5 Sqmm stranded copper conductor for switch/ socket outlet 5 Pin,15 Amps multipurpose controlled with 2.5 sqmm copper conductor FRLSH cable as continuous earth wire of green colour on independent board complete all as specified and directed..

Supply and fixing Modular Switch flush type 6 Amps single pole, one way complete all as specified.

Supply and fixing Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified.

Supply and fixing Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type, complete all as specified.

Supply and fixing Modular Switch 16 Amps single pole, one way, complete all as specified and directed.

Supply and fixing angle/ batton type holder insulated body in white colour, complete all as specified and directed.

Supply and fixing ceiling rose, 3 phase, polycorbonate isolated body for surface type, three terminals, complete all as specified and directed.

S&F LED lamp of 7 Watt (B-22 Base) 6500K, complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient high transmissitivity diffuser, high lumen ouput 230 volts and intregrated electronic driver connector block etc. complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F for LED luminaire 600mm x 600mm square LED panel 35/36 watts, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed.

S&F of exhaust fan, steel body AC single phase 230 volt of size 300mm sweep speed 1400 RPM and 1300 CMM air delivery complete with blade, frame and louvers all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces, complete all as specified and directed.

S&F of exhaust fan, steel body AC single phase 230 volt of size 225mm sweep speed 1400 RPM and 1300 CMM air delivery complete with blade, frame and louvers all as specified and directed incl making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces, complete all as specified and directed.

S&F plastic body exhaust fan, AC single phase 230/ 240 V of size 200mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fixing MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs, complete all as specified and directed.

Supply and fixing MCB SP 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs, complete all as specified and directed.

M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note:- Two runs of 4.00 Sqmm cable,one run of 2.50 Sqmm cable and one run of PVC conduit will be measured as one unit.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

Supply & Laying XLPE insulated, armoured, electric cable 10 Sqmm 2 Core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection complete all as specified and directed.

Excavation in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out, complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each, complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

Supply & laying and jointing GI pipe 'light grade' 40mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings, complete all as specified and directed.

M&L for clean and dry sand (un washed) in trenches including spreading and levelling for cushioning of UG cable, complete all as specified and directed. (Note:- Punned thickness shall be measured for payment.)

M&L for brick sub class ‘B’ (modular size), laid flat in trenches, length equal to width of brick for protection of cable, complete all as specified and directed.

M&L for earthing complete with GI steel earth plate electrode 60cm x 60cm x 6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32 x 6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cm x 30cm x 10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion.

M/S DADISA CONSTRUCTION (BID ID -3466448)

M/s Ravi Traders (BID ID -3465636)