GE(S) BTD 36 of 2019-20 REPAIR MAINT OF STEEL FURNITURE ARTICLES AT BATHINDA MIL STN UNDER GE (S) BATHINDA

Amount

Preparation of old painted iron and steel surface (Externally & internally complete) of Almirah large steel/Almirah steel 1/2H 1/2shelf FD-1031/67(M)/FD/E6/MAP/18 by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed

Preparation of old painted iron and steel surface (Externally & internally complete) of Almirah medium steel FD-1032/243/67(M) by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed

Preparation of old painted iron and steel surface (Externally & internally complete) of Locker steel FD-1029/257 by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed

Preparation of old painted iron and steel surface (Externally & internally complete) of Book Case steel FD-1028 by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed

Preparation of old painted iron and steel surface of Table 900x600x760 mm with drawer FD-1008 by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed. Note - Wooden portion of table 900x600x760 shall be french polished with high gloss finish

Preparation of old painted iron and steel surface (Externally & internally complete) of Table office Clk Steel FD-1004/381/307/84(M) by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed Note - Wooden portion of table Office Clk Steel shall be french polished with high gloss finish

Preparation of old painted iron and steel surface (Externally & internally complete) of Table Office offr Steel FD-1002/1003/84(M) by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed Note - Wooden portion of table Office Offr Steel shall be french polished with high gloss finish

Preparation of old painted iron and steel surface of Table bed side (MAP) FD/E6/MAP/15, FD/E6/MAP/15(R) by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed Note - Wooden portion of table bed side (MAP) shall be french polished with high gloss finish

Preparation of old painted iron and steel surface (Externally & internally complete) of Bed Hard Steel (MAP) FD/E6/MAP/8, FD/E6/MAP/8(R) by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed

Preparation of old painted iron and steel surface of Table Computer FD/E6/MAP/03 by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed Note - Wooden portion of table Computer shall be french polished with high gloss finish

M&L to repair Almirah steel large/Almirah steel 1/2H 1/2shelf by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and as directed by engr-in -charge. Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site. (DRG NO. FD-1031/ 67(M))/FD/E6/MAP/18)

MS lock 6 lever with duplicate key.

Stainless steel handle 150mm long.

Internal locking device duly painted with one coat of red oxide primer.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Pane glass 3.5/ 4mm thick of almirah glazed large steel.

M&L to repair Almirah medium/small steel by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and as directed by engr-in-charge.Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.(DRG NO. FD-1032/243/67M))

MS lock 6 lever with duplicate key.

Stainless steel handle 150mm long.

Internal locking device duly painted with one coat of red oxide primer.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Pane glass 3.5/ 4mm thick of almirah small glazed steel.

M&L to repair Locker steel by replecing the following parts with approved ones.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-257/1029)

MS cromium plated hasp and staple 75mm long.

MS cromium plated handle 100mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

MS hinges 75mm long.

M&L to repair Book case steel by replacing the following part with approved ones .Rest all as per the drawings and as directed by the Engineer-in-Charge. (DRG NO. FD-1028/TP)

SS handle100mm long.

Lock of suitable size with duplicate key to lock all four shutter with one key .

Pane glass 3 mm thick of suitable size.

M&L to repair Table steel with drawer (900mmx600mmx760mm) by replacing the following parts with approved ones.as mentioned below and as per the drawings and as directed. (DRG NO. FD-1008 )

MS lock of suitable size with duplicate key.

Drawer made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet.Align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.

Top made out of 18/19mm thick pre-laminated MDF board (exterior gde) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and as directed.

S&F hard rubber toe of suitable size.

M&L to repair Table 900mm x 600mm without drawer steel by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed. (DRG NO. FD-1007 )

Preparation of old surface of Table 900mmx600mm Without drawer steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) OG colour complete.Rest all as specified and directed.

S&F hard rubber toe of suitable size.

M&L to repair Table 900mm x 900mm steel by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed. (DRG NO. FD-1009 )

Preparation of old surface of Table 900mmx900mm steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) OG colour complete.Rest all as specified and directed.

Hard rubber toe for table 900mmx900mm of approved quality and suitable size.

M&L to repair Teapoy verandah by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed. (DRG NO. FD-255 /208/ 35 )

Preparation of old surface of teapoy verandah by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) white colour complete.Rest all as specified and directed.(DRG NO.FD-255 /208/ 35)

S&F PVC shoes for teapoy verandah of approved quality and suitable size

M&L to repair Teapoy verandah (MAP) by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed. (DRG NO.FD/E6/MAP/17 )

Preparation of old surface of teapoy verandah MAP by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) white colour complete.Rest all as specified and directed.(DRG NO. FD/E6/MAP/17)

Hard rubber toe for teapoy verandah (MAP) of approved quality and suitable size.

Spot welding on various items of steel furniture FD/TP

M&L to repair Table office clerks steel by replacing the following parts with approved ones.Rest all as per the drawings and as directed. (DRG NO. FD-1004/381/307/84(M)).

MS lock of suitable size with duplicate key.

Drawer made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

S&F PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet.Align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.

Top made out of 18/19mm thick pre-laminated MDF board exterior gde ( Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and as directed.

S&F hard rubber toe of suitable size.

M&L to repair Table office officer steel by replacing the following parts with approved ones.Rest all as per drawings and as directed by engr-in-charge. (DRG NO. FD-1003/84(M)).

MS lock of suitable size with duplicate key.

Drawer made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

S&F PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet.Align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and as directed.

S&F hard rubber toe of suitable size.

M&L to repair Table bed side (MAP) by replacing the following parts with prelaminated MDF board(exterior gde)/plywood BWR gde. Rest all as per drawings and as directed by engr-in-charge. (DRG NO. FD/E6/MAP/15, FD/E6/MAP/15(R))

Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with teakwood beading of suitable size.

Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side complete.

Back made out of plywood 6mm thick BWR Gde.

All as per item no 23.03 but bottom complete.

Upper drawer complete.

Lower drawer complete.

Decorative Handle of approved qulity and suitable size.

S&F hard rubber toe of suitable size.

M&L to repair Bed hard (MAP) by replacing the following unserviceable parts with approved ones.Rest all as per drawing and as directed. (DRG NO. FD/E6/MAP/08,FD/E6/MAP/08®)

Plywood top 12mm(9 ply) thick BWR Gde.

Nut and bolt with washer complete.

Pre-laminated MDFboard(exterior gde) of Head rest complete.

Pre-laminated MDFboard(exterior gde) of foot rest complete.

S & F PVC cap of suitable size.

M&L to repair Table computer by replcing the following parts with prelaminated exterior gde MDF board OSL (Designation PLMDF-11).Rest all as per the drawings and as directed by Engr-in-charge. Note:- Sample and shade of materials will be determined as per actual requirement at site.(DRG NO.FD/E6/MAP/03,TP)

Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with teak wood beading 4x18/19 mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners

Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with teak wood beading 4x18/19 mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners , if any complete.

All as per item no 25.01 but Key board drawer complete.

All as per item no 25.01but mouse drawer complete.

All as per item no 25.01 but middle shelf complete.

All as per item no 25.01 but bottom shelf complete.

Telescopic channel of suitable size and approved quality.

M&L to repair Form with back by replacing the seat of size 1800x255 mm made out of 25 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed. (DRG NO. FD-78(M) )

All as per item no 26.00 but Back of size 1800x150 mm complete.

Preparation of old surface of Form with back by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete.Rest all as specified and directed.

M&L to repair Form without back by replacing the seat size 1800x255 mm made out of 25 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed. (DRG NO. FD-77(M) )

Preparation of old surface of Form without back by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete.Rest all as specified and directed.

M&L to repair Table dining OR Steel by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed. (DRG NO. FD-165(M) )

Preparation of old surface of Table dining OR Steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete.Rest all as specified and directed.

M&L for repair Coach Examination by replacing rexine cloth including replacement of unservicable material like cotton, coir,foam, GI Spring,Wooden members ( including drawer) etc and painting of complete steel surface with one coat of synthetic enamelled paint green colour (1st Grade Quality) ref drawing No FD-122(M) Brand of rexin cloth : HR/ACTION/DECORE or equivalant of approved quality.

Removing unservicable tapestry cloth green from Screen movable (3 fold) and welsing loose joints, if any including de-resting the surface and painting with 1 coat of synthetic enamelled paint white colour (1st Grade Quality) and S&F new tapestry cloth of approved quality with suitable size of spring & hook (if broken) in existing pattern completer all as specified refer Drg No FD-83(M) Note - Weight of tapestry cloth shall not be less than 250 gm per sqmtr

Taking out old U/S/Broken Brown glasstop 10mm thick from Table Centre Glass Top and supply and fixing (with vaccum rubber shoes) the same of suitable size, shape and pattern duly perparation and polishing of edges. Rest all as required at site and directed by Engr-in-charge.(DRG NO. FD-375)

SUNIL TRADERS

H.K.TRADERS