07/SE/MC-I/WBPHED/2022-2023

Amount

PART - A (SUPPLY PART)

Supply, delivery at site and storage of sheet steel enclosed compartmentalized floor mounted dead front horizontal draw out type 12KV, 800A, VCB 3Panel Distribution Board in compliance with the detailed technical specification as given in the NIT. The Panel shoule be SCADA Compatible.

Supply, delivery at site and storage of Oil immersed 11/0.433KV, Indoor type copper wound 1000KVA 3Ph. 50C/s.with a Vector Group of Dyn-11 Transformer and fitted with OLTC unit complete with all accessories in compliance with relevant Indian Standard and as detailed in the NIT Specification.

Supply, delivery at site and storage of 415V AC, 50Hz., 3 Phase and Neutral 1600A Bus Duct with Electrolytic grade Aluminium Flat Bars in Sheet Steel enclosure alongwith fixing brackets and accessories from transformer secondary terminal to incomer ACBs of 415V PDB in compliance with the attached technical specification.

Supply, delivery at site and storage of 2mm sheet steel enclosed, cmpartmentalised non draw out construction, epoxy based painting by powder coating method, floor mounted 415V 1600Amps. Power Distribution Board with IP54 degree of protection complete in compliance with the detailed technical specification as given in the NIT. The Panel should be SCADA Compatible.

Supply, delivery at site and storage of 110V, 100AH maintenance free type lead acid battery with battery charger & distribution board in compliance with NIT Specification.

Supply, delivery at site and storage of 11KV(E) grade 3C, 240sq.mm XLPE insulated aluminium conductor armoured cable conforming to IS-7098 Part-II of approved make from Power Supply agency Panel Board to Incoming of HT Panel and from outgoing HT Panels to Transformers.

Supply, delivery at site and storage of 1.1KV grade XLPE insulated Al. Ar. Cables of following sizes.

1.1KV grade 3.5C 300sq.mm Cable from PDB to MCC at Pump House (2 Feeders,4 Cables per feeder)

1.1KV grade 4Core 16sq.mm (Al.) cable for Lighting, Ventilation etc.

1.1KV grade 4Core 10sq.mm Al. Ar. Cable for Battery Charger.

1.1KV grade 2Core 6sq.mm Al. Ar. Cable for Single Phase Power Supply.

Supply, delivery at site and storage of 1.1KV grade multicore PVC insulated 2.5sq.mm stranded copper conductor armoured control cable.

4Core 2.5Sq.mm XLPE Cu. Ar. Cable.

12Core 2.5Sq.mm XLPE Cu. Ar. Cable.

19Core 2.5Sq.mm XLPE Cu. Ar. Cable.

Supply, delivery at site and storage of earthing and lightning protection materials conforming details specified in NIT.

Supply, delivery at site and storage of ladder type cable tray for laying of power cable and GI perforated cable tray for laying of control cable at sub-station having proper MS Structural support.

Outdoor illumination of Sub-Station in line to the technical specification with LED Lightings and external wiring with GI Couduit etc.

PART- B (INSTALLATION PART)

Installation of all items as mentioned in Part-A including supply of all erection materials as required for cable termination with supply of jointing kits, cable supports and clamps etc. including laying of HT & LT Cables through permanent cable trench or directly burried under ground providing GI rack / tray, earthing & lightning protection as per IE Rules to the entire satisfaction of EIC in compliance with NIT specification. (Cost includes hires charges of generator, welding set, fuels, lubricants etc. for completion of work)

High pressure testing of the Sub-Station including relevant testing of 11KV cable, earthing etc. by approved agency of Directorate of Electricity, Govt. of West Bengal and obtaining approval certificate of Sub-Station from Directorate of Electricity as per direction and to the entire satisfaction of EIC.

Commissioning of the Sub-Station including 11KV HT Switch Board, 11/0.433KV Ttransformers, Power Distribution Board, cables, earthing etc. by approved agency of Directorate of Electricity, Govt. of West Bengal as per direction and to the entire satisfaction of EIC.

Operation of the entire installation of substation on 24 hours basis including guarding and maintenance for a period of 15 (fifteen) months (3months trial + 12months O & M) are to be provided with supply of skilled, semi-skilled and un-skilled personnel including watch & ward personnel from the date of commissioning. During maintenance period, supply of all consumable materials, sundries & lubricants are to be supplied. Charges of electrical energy during maintenance period will be borne by the Department.

APEX ENGINEERING & PROJECT CO

R.N.S.TRADING

WEST BENGAL ENGINEERING CO.

DAS ENTERPRISE

B T PROJECTS PRIVATE LIMITED