Installation of new Coke Oven Battery No. 9 at BSL with Stamp Charging Technology at Greenfield Site- Battery Proper, Refractories, Oven Machines, Wet Quenching, Coal Handling & Coke Sorting Plant (Pkg-2)

• Bidder should fulfill the following Eligibility criteria: 1) The bidder (sole or consortium) should have carried out design/ engineering, erection/ supervision of erection and commissioning/ supervision of commissioning of a stamp charged by-product recovery type coke oven battery of minimum 5 meter oven height in one single project in last 20 years as on date of NIT. Bidder experience based on subcontracting of the basic design for the reference project would not be counted as a valid experience. Design/ Engineering under this para would mean basic data and basic engineering.

• The bidder (sole or consortium) should have carried out supply of at least five of the following items for top/ stamp charged by-product recovery type coke oven battery (new or rebuilt or repaired) in single or separate projects in last 20 years as on date of NIT. a) Gooseneck b) Coke Oven Door c) Coke Oven Doorframe d) Flash Plate e) Charging Hole Lid & Frame Assembly f) Waste Heat Box g) Air Inlet Box h) Fabricated Buckstay i) Gas Collecting Main j) Reversing Mechanism Self-attested photocopies of following documents shall be submitted by the bidder in support of the Para No. 1 and 2 above: i) Work order/ any other letter of award of work/ Contract document/ Purchase order issued by the client. ii) Commissioning certificate/ Performance certificate/ Completion certificate/ Final acceptance certificate/ any other documents issued by the client showing completion of the job; corresponding to (i) above. The bidder should submit an affidavit stating that the eligibility documents furnished by them are genuine. Client would mean the plant where the reference project has been commissioned.

• In case the bidder is a consortium (maximum 4 members allowed): Page 2 of 3 a) One or more of the consortium members can, either individually or together, fulfil the criteria of Para No.1 & 2 above. b) The responsibility of design/ engineering, supply, erection/ supervision of erection and commissioning/ supervision of commissioning should be taken up in the responsibility matrix by the respective members who fulfil the criteria as per Para No.1 & 2. Vetting of the detail drawings based on the basic data and basic engineering would be the responsibility of the respective members who fulfil the criteria as per Para No.1 & 2. c) However, supply of the items mentioned in para 2 above can also be taken up in the responsibility matrix by any consortium member on the strength of its Parent/ Group company. The consortium member should submit document to establish relation with Parent/ Group company and a letter of undertaking/ comfort letter from the Parent/ Group company for back-to-back support for commissioning & completion of the project. d) For taking up the remaining jobs of Para 1 and 2, the respective members should have experience in any single project in the sector of steel/ power/ oil & gas/ water having order value not less than Rs 50 crore in the last 20 years as on the date of NIT. e) The leader of consortium should be the member having maximum job or share of work in value terms. Bidder has to submit Notarized copy of Memorandum of Agreement and Responsibility Matrix indicating percentage of scope of work to be carried out by each member in value terms of total contract value. Self-attested photocopies of the following documents showing experience as per the responsibility matrix for each member of the consortium, as applicable, should be submitted by the bidder in support of the above: i) Work order/ any other letter of award of work/ Contract document/ Purchase order issued by the client. ii) Commissioning certificate/ Performance certificate/ Completion certificate/ Final acceptance certificate/ any other documents issued by the client showing completion of the job; corresponding to (i) above. Each member of the consortium should submit an affidavit stating that the eligibility documents furnished by them are genuine. Client would mean the plant where the reference project has been commissioned.

• The average annual financial turnover of the bidder during any three financial years out of last four financial years ended on or before 31.03.2024 shall be at least Rs. 350 Crore. (Rupees Three hundred fifty crore only) or equivalent in any foreign currency. The Financial Year means the accounting year accepted by the prevailing law of respective country. In case of consortium bidding, Minimum Turnover requirement for each consortium member = Rs 350 Crore × % of scope of work in value terms of total contract value declared in Consortium Agreement (MoA). The bidder (each member of the consortium; in case of consortium bidding) shall Page 3 of 3 submit audited annual financial reports in support of the above. The net worth of the bidder (each member of the consortium; in case of consortium bidding) should be positive as per the latest audited annual financial reports. Documents submitted in support of financial eligibility wherever certified by the CA members of ICAI (The Institute of Chartered Accounts of India) from 01.07.19 onwards, shall contain the Unique Document Identification Number (UDIN).

• Bidder should submit self-declaration in the prescribed format (Annexure-7 of ITB of section II of SBD) that No Corporate Insolvency Resolution/ Liquidation Process have commenced against them under National Company Law Tribunal (NCLT). In cases of Consortium, bidding, a self-declaration shall be submitted individually by each member of the Consortium in the prescribed format (Annexure-7 of ITB of section II of SBD) that No Corporate Insolvency Resolution/ Liquidation Process have commenced against them under National Company Law Tribunal (NCLT).