Renovation of Toilets

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centring & shuttering including strutting, propping etc. & removal of form for :

Shelves (Cast in situ)

Edges of slab and breaks in floors & walls.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab over 0.50 sqm

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, ( Evesest , Everite ) anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete :

Providing and fixing bright finished 100 mm mortice lock with 6 levers ( Godrej , Doorset Make ) without pair of handles of approved quality for aluminium door, withnecessary screws etc complete as per direction of Engineer- in-charge

Providing and fixing Ist quality ceramic glazed wall tiles 12" x 24" conforming to IS: 15622 (thickness to be specified by the manufacturer),(Kajaria , Nitco, RAK make) of approved make, in all colours,shadesexcept burgundy ,bottlegreen ,black of any size as over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and in white pigment of matching shade complete.

Providing and laying vitrified floor tiles double charged, anti skid ,(Kajaria , Nitco, RAK make) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

12 mm cement plaster of mix :

1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix :

1:6 (1 cement: 6 coarse sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in- charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer -in -charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling tile work in floors, wall tiles and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 06 mm to 25 mm

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15 mm to 40 mm nominal bore

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:

Up to 150 mm diameter

Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

Dismantling of flushing cistern / EWC / Wash Basin /Indian WC of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unser- viceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing white vitreous china water closet ( Jaquar or Hindware make ) squatting pan (Indian type) :

Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make ( Jaquar -CHR-769L300x190 or Hindware - F850003CP make ) and as per the direction of Engineer-in-charge.

Providing and fixing soil, waste and vent pipes ( BIC ,NIC ,SKF Make ) :

100 mm dia

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

75mm diameter :

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :

For 100 mm dia pipe

For 75 mm dia pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

100 mm dia

Sand cast iron S&S as per IS - 3989

Providing and fixing plain bend( BIC ,NIC ,SKF Make ) of required degree.

100 mm dia

Sand cast iron S&S as per IS - 3989

75 mm dia

Sand cast iron S&S as per IS - 3989

Providing and fixing heel rest sanitary bend

100 mm dia

Sand cast iron S&S as per IS - 3989

75 mm dia

Sand cast iron S&S as per IS - 3989

Providing and fixing single equal plain junction of required degree with access door( BIC ,NIC ,SKF Make ), insertion rubber washer 3 mm thick, bolts and nuts complete.

Sand cast iron S&S as per IS - 3989

Sand cast iron S&S as per IS - 3989

Providing and fixing single equal plain junction of required degree :

Sand cast iron S&S as per IS - 3989

Sand cast iron S&S as per IS - 3989

Providing and fixing collar ( BIC ,NIC ,SKF Make ):

Sand cast iron S&S as per IS - 3989

Sand cast iron S&S as per IS - 3989

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :

Providing and fixing trap ( BIC ,NIC ,SKF Make )of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

Sand cast iron S&S as per IS - 3989

100 mm inlet and 75 mm outlet

Sand cast iron S&S as per IS - 3989

Providing and fixing G.I. pipes ( Jindal Hissar ,Class- B or TATA make ) complete with G.I. fittings ( SVW ,Unik make ) and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall

20 mm dia nominal bore

32 mm dia nominal bore

50 mm dia nominal bore

Providing and fixing G.I. Pipes ( Jindal Hissar ,Class- B or TATA make ) complete with G.I. fittings ( SVW ,Unik make ) and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall etc.

15 mm dia nominal bore

20 mm dia nominal bore

32 mm dia nominal bore

Making connection of G.I. distribution branch with G.I. main of followingsizes by providing and fixing tee, including cutting and threading thepipe etc. complete

25 to 40 mm nominal bore

Providing and fixing gun metal gate valve ( Leader, Zoloto, Sant ) with C.I. wheel of approvedquality (screwed end) :

20 mm nominal bore

32 mm nominal bore

50 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality ( Viking make or equalent ) , High or low pressure, with plastic floats complete :

20 mm nominal bore

Providing and fixing gun metal non return valve of approved quality ( Leader , Sant, Zoloto -ISI make ) ( screwed end):

32 mm dia nominal bore

Vertical

Providing and fixing G.I. Union ( SVW , Unik )in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

15 mm nominal bore

20 mm nominal bore

32 mm nominal bore

50 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Sintax , Diplast - ISI ), IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Circular tank

Providing and fixing C.P. brass angle ( Jaquar-5053N /Hidware -F280004CP make) valve for basin mixer and geyser points of approved quality conforming to IS:8931

15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing unplasticised P.V.C. connection ( Viking , Jaquar make ) pipe with PTMT nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length

With common burnt clay F.P.S. (non modular) bricks

Cutting holes up to 30x30 cm in walls including making good the same:

Providing & fixing chrome plated brass battery based infrared sensoroperated pillar cock ( Jaquar CHR-51021 , Hindware - F240008CP make ) , having foam flow technology.

15 mm nominal bore

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS: 733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beeding for glazing/ panelling, C.P. Brass/ Stainless steel screws, all complete as per architectural drawings and directions of Engineer-in-charge. (Glazing and panelling to be paid for seperately).

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/Neoprene gasket required (Fittings shall be paid for seperately)

Bronze Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board confirming to IS: 12823 grade -I Type-II, in panelling fixed in aluminium doors, window shutters and partition frames with C.P. Brass/ Stainless steel screws, all complete as per architectural drawings and directions of Engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with EPDM Rubber/Neoprene gasket etc.complete as per architectural drawings and directions of Engineer-in-charge.(Cost of aluminium snap beading shall be paid in the basic item):

With float glass (Saint Gobain ,Modi guard make) panes of 6.00 mm thickness.

Providing and laying water proofing (Fosroc,Cico, sikka) treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing C.P. brass flush valve 32 mm double flow ( 3.0/6.0 ltr.) concealed body with exposed shut off provision with 100 mm square plate/ wall flange including required flush pipe/bend to the water closet pan ( Jaquar - FLV-CHR-1085 SQ or equivalent series of Grohe / Kholer make ) complete in all respect as per the directions of Engineer-in-Charge.

Providing and fixing white vitreous china battery based infrared sensor operated urinal ( Jaquar 132530 or Hindware- 96007 make ) of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), including fixing of infrared sensor ( Jaquar -STL-51087 or equivalent series of Grohe / Kholer make ) having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Refillig of the available malba removed from the sunken portion of the toilets in layers under floor including watering ,ramming ,consolidating and dressing to make top level smooth for concreting as per the direction of Engineer-in-Charge.

Providing and fixing C.P. brass basin mixer on wall, mixer including two concealed stop cock with basin spout and flow restrictor composite one piece body ( Jaquar -FLR-CHR-5433NGD or equivalent series of Grohe / Kholer make as per the direction of Engineer-in-Charge.

Providing and fixing C.P. brass two way bib cock 15 mm with wall flange and flow restrictor ( Jaquar -FLR-CHR-5041NGA or equivalent series of Grohe / Kholer make as per the direction of Engineer-in-Charge .

Providing and fixing C.P. brass hand shower / Health Faucet wih 8 mm dia 1.2 metre long flexible tube & wall hook with flow restrictor . ( Jaquar ALD-CHR-573GC or equivalent series of Grohe / Kholer makeHindware F-160068IV make) as per the direction of Engineer-in-Charge .

Providing and fixing white vitreous china under counter wash basin with fitting accessories ( Jaquar FNS-WHT-40701 , equivalent series of Grohe / Kholer make) complete in all respect as per the direcion of Engineer -in-Charge.

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan with soft closing seat cover and C.P.bend ( Jaquar -551SSPP or equivalent series of Grohe / Kholer make ) complete in all respect as per the directions of Engineer-in- Charge.

Providing and fixing C.P. brass waste coupling 32 mm dia of full / half thead as required . ( Jaquar ALD-CHR-709 or equivalent series of Grohe / Kholer make) as per the direction of Engineer-in-Charge .

Providing & fixing C.P. Brass grating of required size (100mm to 125mm dia) and shape of approved quality ( Viking or Jaquar make ) , cutting and making good the floors wherever required or as per the direction of Engineer-in-charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm or any other required rectangular size

Providing and fixing the C.P. brass special fittings / accessories for the disabled toilets ( Jaquar / equivalent series of Grohe / Kholer makehindware make ) complete including drilling fastners ,bolts etc as per requiremnt as per the direction of Engineer-in-Charge.

Grab bar vertical swing ( jaquar BG0800CSequivalent series of Grohe / Kholer make)

Grab bar 692mm long ( Jaquar- WAC -SAP-BR0600CS / equivalent series of Grohe / Kholer make)

Providing and fixing 8 mm thick frosted glass ( Jaquar CHR- 810 UC450X orequivalent series of Grohe / Kholer make ) - curved shaped urinal partition of 900mmx 450 mm size complete with all cromefinished S.S. fittings and sleeve complete in all respect as per the direction of Engineer-in-Charge.

Buy back of the following C.P. brass fittings received from the toilets including removing complete as per the direction of Engineer-in-charge :

32 mm C.P. brass flush valve

15 mm C.P. brass push valve

32 mm C.P. brass bottle trap

15mm C.P. brass basin mixer

15 mm C.P. brass angle valve

15 mm C.P. brass bib tap

32 mm C.P. brass waste coupling

32 mm CP bend

Buy back of aluminium door shutters including frames including transpotation , loading , unloading and labour etc. complete as per the direction of Engineer-in-charge.

Buy back of C.I pipes and fittings complete of all sizes including loading ,unloading and all the labour ( qty. dismantled taken for measurement in meter ) complete as per the direcion of Engineer-in-Charge.

Providing and fixing of C.P. brass toilet paper holder of ( Jaquar AKP-35753PS / equivalent series of Grohe / Kholer make including drilling etc. complete in all respect as per the directions of Engineer-in- Charge.

Providing and fixing of C.P. brass towel rod of ( Jaquar CAN-1111 SM / equivalent series of Grohe / Kholer make including drilling etc. complete in all respect as per the directions of Engineer-in- Charge.

Providing and fixing of Hand Drier of ( Jaquar HDR-SSF-AK2807 / equivalent series of Grohe / Kholer make including drilling etc. complete in all respect as per the directions of Engineer-in- Charge.

Providing and fixing of Soap dispensor of ( Jaquar SDR-WHT-DJ0010F / equivalent series of Grohe / Kholer make including drilling etc. complete in all respect as per the directions of Engineer-in- Charge.

Providing and fixing of paper towel dispensor of ( Jaquar PTD-SAP-DT0106CS /equivalent series of Grohe / Kholer make including drilling etc. complete in all respect as per the directions of Engineer-in- Charge.

Providing and fixing of Sparkle film/ decorative tape on the existing glass doors / ventilators (of 3M make) including making required pattern and letters by cutting complete in all respect as per the direction of Engineer -in- Charge .

Wiring for circuit/ submain wiring ( Ecko , Finolax , Polycab) alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit ( Diplast , Polyplast ) as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing following modular switch/ socket ( L&T , Legrand ) on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing modular blanking plate ( L&T , Legrand ) on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box ( National make) alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75 mmX75 mm)

3 Module (100 mmX75 mm)

4 Module (125 mmX75 mm)

6 Module (200 mmX75 mm)

Supply and Installation of exhaust fan 200 mm swipe, with louvers ( Polycab , Havells make in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supplying and intallation of slim LED tube light fitting ( Philips ,Wipro make ) complete with connections , testing and commissioning etc. as required or as per the direction of Engineering in charge.