Petty repair for internal wiring including MCBs/DBs, Fittings/ Fixtures at Vayusenabad, AF Stn Tughlakabad

Amount

Taking out old unserviceable point wiring complete with fitting/fixtures, M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and include PVC conduit with all fittings medium grade ISI Marked and PVC insulated FRLS copper conductor cable of size 1.5 sq mm as earth wire, connected to common earth dolly suitable for mounting modular switches including modular metal flush boxes and modular face plate all as specified and as directed by Engr-in-charge, (The works includes cutting of chases and making good disturbed surfaces and rate deemed to included in quoted rate complete all as specified and as directed of the following.

One Light point controlled by one way switch complete all as specified and as directed.

One fan point controlled by one way switch and fan regulator on same switch board complete all as specified and as directed.

One 3 pin socket outlet point 5 Amp on same board complete all as specified and as directed

One 3 pin socket outlet point 5 Amps on independent board complete all as specified and as directed.

M&L for bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5sq. mm size complete all as specified and as directed.

All as per item no 1.00 above but One 3 pin socket out let 15 Amps on independent board, with cables 4.0 Sq mm size and earth wire 4.0 Sqmm complete all as specified and as directed.

One light point controlled by two way switches with cable of size 2.5 Sqmm nominal area and 2.5 Sqmm earth wire complete all as specified and as directed.

Taking out old unserviceable sub main wiring of any size and type, M&L for sub main wiring with multistranded FRLS copper conductor cable PVC sheathed in and including concealed in brick wall/RCC as per the site condition, providing suitable PVC conduit with two runs of 6.0 Sqmm and 6 Sqmm FRLS copper conductor as earth wire and connected to earth dolly all as specified and as directed by Engr-in-Charge. (The work includes cutting of Chassis and making good the disturbed surfaces) complete all as specified and as directed.

Taking out old unserviceable THREE PHASE sub main wiring of any size and type, M&L for sub main wiring with multistranded FRLS copper conductor cable PVC sheathed in and including concealed in brick wall/RCC as per the site condition, providing suitable PVC conduit with FOUR x runs of 10.0 Sqmm and 2x10.0 Sqmm FRLS copper conductor as earth wire and connected to earth dolly all as specified and as directed by Engr-in-Charge. (The work includes cutting of Chases and making good the disturbed surfaces) complete all as specified and as directed.

M&L in replacement for modular socket outlet 6A, 2/3 pin combined 2 module complete all as specified and as directed.

M&L in replacement modular socket outlet 6A/16A, 2/3 pin combined 2 module complete all as specified and as directed.

M&L in replacement modular switch 1 way 6 Amps 1 module, suitable for 230 Volts Ac supply complete all as specified and directed.

M&L in replacement modular switch 2 way 6 Amps 1 module, suitable for 230 Volts AC supply.

M&L in replacement modular switch 1 way 15/16 Amps 1 module, suitable for 230 Volts Ac supply complete all as specified and as directed.

M&L for ceiling rose 3 phase/PVC/ polycarbonate isolated body

S&F step type electronic fan regulator Modular type, single phase 220 V , one module type complete all as specified and as directed.

S&F in replacement of Ding Dong Bell,single phase, 230 volt AC,50 HZ complete all as specified and as directed.

M&L in replacement, Batten holder bakelite, AC, 220 Volts complete all as specified and as directed

M&L for Bell push, Modular type, one module suitable for 230 Volts AC supply complete all as specified and as directed.

M&L for switch piano flush type single pole one way 5 amps complete all as specified and as directed

M&L for switch piano flush type single pole one way 15 amps complete all as specified and as directed.

M&L for Socket outlet, 3 pin 2 in 1 of 5 amps capacity complete all as specified and as directed.

M&L for Socket outlet, 3 pin 2 in 1 of 15 amps capacity complete all as specified and as directed.

M&L for Switch socket combination 2 in 1 3 pin 5 and 15 amps flush type complete all as specified and as directed.

M&L for Switch socket combination 2 in 1 3 pin 5 amps flush type complete all as specified and as directed.

Taking down old unserviceable Plug & Socket DB, M & L for distribution boards in sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and as directed.

Taking down old unserviceable MCB DBs, M&L for distribution boards insheet metal enclosure for MCB's (D.B) 8 way (SPN) 200 Amps rated bus bar complete Cat No- DHDPSHODRW08 complete all as specified and as directed.

Taking down old unserviceable MCB DBs, M&L for distribution boards in sheet metal enclosure triple pole and neutral 415 Volts 4 way (TPN) Double door type complete fixed with concealed on walls/on surface and matching with existing surface all as specified and complete all as specified and as directed.

Taking down old unserviceable MCB DBs, M&L for distribution boards in sheet metal enclosure triple pole and neutral vertical Load line 415 Volts 8 way (TPN) Double door type complete fixed with concealed on walls/on surface and matching with existing surface all as specified and as directed by EIC complete all as specified and as directed.

Taking down old unserviceable MCCB DBs, M&L for distribution boards in sheet metal enclosure triple pole and neutral vertical Load line 415 Volts 8 way, IP 43 of metal door type complete with 100 Amps MCCB, Double door type complete all as specified and as directed. Note- MCCB 100 Amps 4P will be measured in quoted rate by the contractor

M&L for MCB 240 volts SPN 06- 32 amp 10KA breaking capacity, ISI marked complete all as specified and as directed.

M&L for MCB 240 volts SP 6- 32 amp 10KA breaking, capacity, ISI marked, Make Legrand/havells/L&T complete all as specified and directed

M&L for MCB 415 volts TPN 63 amp 10KA breaking, capacity, ISI marked complete all as specified and as directed.

M&L for Isolator 415 volts TPN 100 amp 10KA breaking, capacity, ISI marked, Make Legrand/havells/L&T complete all as specified and directed.

M&L for MCB 415 volts TPN 125 amp 10KA breaking, capacity, ISI marked, Make Legrand/havells/L&T complete all as specified and directed.

S&F MCCB 160 Amps 4 pole 415 Volts 36 KA breaking capacity Make Legrand/havells/L&T complete all as specified and directed.

S&F MCCB 250 Amps 4 pole 415 Volts 25 KA breaking capacity Make Legrand/havells/L&T complete all as specified and directed.

S&F MCCB 400 Amps 4 pole 415 Volts 25 KA breaking capacity complete all as specified and as directed.

M&L for supply, installation and testing for Maintenance free Grounding (Earthing) system complete buried directly in ground vertically (Earth pit not less than 10 feet below ground level) by making bore hole of 100 mm dia for inserting 01 No - 17MM dia Molecular copper bonded high tensile low carbon steel circular earth electrode of 3 mtr length with average copper thickness of 100 microns alongwith Akaltech Enviromental friendly grounding enhancing compound and heavy duty (HDPE) PVC pipe cap all in below the ground level and connected to copper earth wire 2 mm dia by means of same metal bolts, nuts and washers etc including protection pipe of of GI 15 mmm bore med grade upto 7.5 meter length and connection of earth lead to main distribution/LT panel board with copper lugs complete all as specified and directed by Engr-in-charge. (Note- Necessary earth work, PVC pipe and all materials supplied by the contractor is deemed to be included in quated rate) complete all as specified and as directed

Taking out old unserviceable fitting, S&F wall mounted LED batten 20 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 230 Volt, AC, single phase, 50 Hz including all accessories prewired including making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge.

S&F in replacement wall mounted LED batten 10 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, 230 Volt, including all accessories prewired including and making necessary electrical connection with 3 core copper coductor and testing complete all as directed by Engr-in-charge. Havells Cat No- LHEWEBP6PL1W012.

S&F in replacement 2'x2' size LED panel lighting luminaire glare free illumination suitable fr false ceiling (armstrong/Grid) fitting size 600x600x70 mm (LXWXH) of 42 watts capacity recess mounting with high brightness SMD LEDs completee incl taking down old unserviceable fittings complete all as specified and directed.

S&F in replacement surface mounting 1feetx1feet size LED panel lighting luminaire glare free illumination suitable for surface mounting square slim down light white, size 300x300x70 mm (LxWxH) of 18/20 watts capacity recess mounting with high brightness SMD LEDs complete including taking down old unserviceable fittings complete all as specified and directed.

S&F Energy saving new generation 10 watt LED bulk head luminaries with Opal diffuser 230V, single phase, complete with all accessories and all electrical connections, all as specified and directed by Engg-in-charge.

S&F in replacement LED Flood light fitting 120 Watts fabricated with die-cast aluminium IP-65 flood light with high power LED as light source complete with all connected accessories and all as directed by the Engr-in-Charge.

Taking down old unserviceable exhaust fan motor from the existing position, Supply and fixing new motor of 300 mm sweep exhaust fan, ISI marked copper winding complete with all connected accessories and directed by Engr-in-charge.

M&L for oil filled capacitor of 2.5 mfd capacity, 240 Volts, AC, 50 Hz complete all as specified and as directed.

S&F LED lamp 7 watt suitable for B22 base complete all as directed by Engr-in-charge.

M&L in replacement of exhaust fan 300 MM sweep ISI marked, double ball bearing, 230V, AC, 50 Hz complete with copper winding and front grill bird guard all as specified and directed by Engr-in-charge.

S&F in replacement copper wire in wiring circuits as per site requirements PVC insulated single core 1.5 Sqmm 1100 volts grade multi stranded conductor complete all as specified and directed by Engr-in-charge.

S&F in replacement copper wire in wiring circuits as per site requirements PVC insulated single core 2.5 Sqmm 1100 volts grade multi stranded conductor complete all as specified and directed by Engr-in-charge.

S&F in replacement copper wire in wiring circuits as per site requirements PVC insulated single core 4 Sqmm 1100 volts grade multi stranded conductor complete all as specified and directed by Engr-in-charge.

S&F in replacement copper wire in wiring circuits as per site requirements PVC insulated single core 6 Sqmm 1100 volts grade multi stranded conductor complete all as specified and directed by Engr-in-charge.

M&L in replacement heating element suitable for geyser storage type of 230 Volts, AC, single phase, 50 Hz of capacity 2.0 KW, ISI marked, complete all as specified and as directed.

Supply, installation and testing in replacement of Geyser water heater 4/5 star rated vertical type, electrically operated, single phase, 240 volts, AC 50 Hz of capacity 50 litres with stainless steel tank with ABS body rust free complete with all connected accessories. Make- Bajaj new shakti or eqvt in Havells/Venus

M&L in replacement PVC braided connection pipe 450 mm long of 15 mm bore suitable for Geyser inlet and outlet complete all as specified. Make- CAMRY

M&L in replacement Thermostat cut out range 0-90 degree, ISI marked, 5/9" long as per sample suitable for single phase 230 volts, AC supply all as specified.

M&L in replacement of Ceiling fan 1200 MM sweep 05 star rated, ISI marked with copper winding and double ball bearing having three blades complete including taking out old existing unserviceable ceiling fan from the position complete all as specified and directed by Engr-in-charge.

M&L in replacement flood light IP 65 of 50 watts capacity LED type with high power LEDs fabricated with die cast aluminium housing suitable for general purpose lighting complete suitable for single phase, 230 V, AC, 50 Hz complete all as specified and directed by Engr-in-charge.

M&L in replacement flood light IP 65 of 25 watts capacity LED type with high power LEDs fabricated with die cast aluminium housing suitable for general purpose lighting complete suitable for single phase, 230 V, AC, 50 Hz complete all as specified and directed by Engr-in-charge.

Dismantling and taking out unserviceable bracket, S&F GI bracket of length 1.2 Meter suitable for mounting on the building for street light and supporting the street light fitting. The GI bracket shall be made up of GI pipe, of size 25 mm dia, light grade. One end of the bracket should be fixed on top of the pole by using 02 Nos clamps suitable for mounting on pole & clamp size 25x5mm thick including nuts, bolts and washers of suitable size, complete all as specified and directed by Engr-in-charge

Notes: The amount of Rs 57,057.00 against schedule of credit given on Tender Serial Page No 33 shall be deducted from the total amount quoted by the contractor against BOQ while deriving the contract sum for acceptance.

V r traders

Saini Enterprises

Parveen Builders