UPGRADATION OF SPORTS INFRASTRUCTURE AND PROVISION OF POWER DISTRIBUTION PANEL BOX WITH CHANGEOVER SWITCH BEHIND NDB ROOM FOR PROVIDING POWER SUPPLY TO SDR EQUIPMENT AND AIR CONDITIONERS AT AF STN SURATGARH

Amount

BOQ (UPGRADATION OF SPORTS INFRASTRUCTURE AND PROVISION OF POWER DISTRIBUTION PANEL BOX WITH CHANGEOVER SWITCH BEHIND NDB ROOM FOR PROVIDING POWER SUPPLY TO SDR EQUIPMENT AND AIR CONDITIONERS AT AF STN SURATGARH.)

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out, complete all as specified and directed.

All as per ser itme No 1.00 here in before but exc. 1.5m not exc 3.0m in depth, for foundation etc, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm in soft /loose soil, complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) (mass concrete) as in foundation of poles & stay etc, complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

Spreading of soil, levelling, watering and well ramming in layers not exc. 25cm thick under floors, complete all as specified and directed Note:-Earth obtained from item No 1 shall be used

M&L for hard core of broken stone or boulders gauge exc 63mm but not exc 100mm deposited, spread and leveled in layers not exc.15cm thick, each layer watered and rammed to a true surfaces, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub floor , sub base; concrete surface finished even & rough to receive topping floor/tiles finish/layer, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor topping; concrete surface finished even & smooth without using extra cement, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in benching, padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of exterior acrylic emulsion (weather proof treatment ) in camouflage in multi shade on wall of approved colour and shade over one coat of primer, complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) filling as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) and other similar work, complete all as specified and directed.

S&F for mild steel as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed. drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description , over 10cm in width or girth not otherwise described by and applying two coats synthetic enamel paint over a coat or red oxide zinc chrome primer, complete all as specified and directed

M&L for preparation of new steel surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for stainless steel (304 Grade) sections like hollow tubes, angles. flats, brackets etc in any shape and size with and including SS screws/fasteners etc including all type machine work like cutting, belding, bending, moulding, grinding, polishing, buffring etc to get required shape and size fixed in railing and other similar etc. work at deck, bridge, stairs, entrance, swimming pools, etc.any color like silver, metallic Grey etc corrosion Resistant design and pattern approved by GE, complete all as specified and directed.

M&L For precast cement concrete 1:2:4 type B1, (using 20mm graded crushed stone aggregate) as in kerb stone (road side ediging) complete all as specified and directed.

S&F for 200 Watt LED street light with pressure die cast aluminium housing & toughened glass with IP-66 degree protection, individual LED's must have peanut lenses for better throw across & along the road with luminarie efficacy of greater than 120 lumen/Watt (Minimum lumen output of luminarie should be 4500 Lumens) color rendering (CRI) of > 75 and co-related color temperature (CCT) of 5700K (+ 500K), The luminarie should have 5 KV surge protection, PF > 0.95, and total harmonic distortion of THD < 10%, voltage range of 140-280V should be provided. Luminarie should have top maintainable driver compartment for easy access to driver during maintenance. The driver used must be a constant current driver with efficiency of > 85%. The manufactures LOGO must be embossed/Engraved in the housing of the luminarie. Manufactures to provide LM80 from source manufacturer and should have adequate testing facilities approved by ministry of science (Govt of India) to provide LM 79 report, complete all as specefied and directed by Engr-in-charge. Make : Crompton Cat No TRP-409-60-57-SL-GL-NSG/Havelles

S&F for steel tubular swaged poles with cast iron base plate, finial taper plug bolts, nuts, screws as specified type 410 SP-64 (12.00 Mtr long) with triple holder (Round bracket) for three street lights on pole and including embossing the manufacturers name and IS No of pole and erecting in position all as specified and directed incl painting the exposed portion with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat red oxide primer and painting of 30cm wide red and white strips upto 1.5 mtr from bottom of the errected pole including marking of pole number, complete all as specified and directed by Engineer-in-Charge. Note: Necessary excavation, earth work and PCC shall be measured and paid for separately.

Supply and laying 50mm dia in trenches/fixing to wall / ceiling or floor, jointing, GI tubing, medium grade including all fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc, complete all as specified and directed.

Supply and laying 40mm dia in trenches/fixing to wall / ceiling or floor, jointing, GI tubing, medium grade including all fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc, complete all as specified and directed.

Supply and laying 25mm dia in trenches/fixing to wall / ceiling or floor, jointing, GI tubing, medium grade including all fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc, complete all as specified and directed.

Supply and fixing of Gun-metal, globe or gate valves screwed down high pressure, heavy duty (ISI marked), with iron wheel head, screwed both ends for iron pipe or for unions suitable for 25mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Gun-metal, globe or gate valves screwed down high pressure, heavy duty (ISI marked), with iron wheel head, screwed both ends for iron pipe or for unions suitable for 50mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable of size 10 Sqmm 3 core multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system including with suitable size of aluminium lugs of size 10 sqmm 3 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core laid in trenches or under road, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core laid in trenches or under road, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 4 core laid in trenches or under road, complete all as specified and as directed.

Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable of size 70 Sqmm 3.5 core multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system including with suitable size of aluminium lugs of size 70 sqmm 3.5 core, complete all as specified and directed. Note for item No 27 to 31: Excavation, sand and brick work will be measure & paid separately

M&L for sand cushioning to cables with a layer of sand 8cm deep before laying the cable and 15cm depth (punned) down to 10cm depth after laying and stretching of cable) in trenches with river sand, complete all as specified and directed.

S&F for burnt brick sub class B for cable protection laid adjacent to each other perpendicular to the direction of cable in trenches, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm grade stone aggregrate) (mass concrete) as in foundation of poles & stay etc, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping for old and new poles including form work and finishing the surface with cement mortar 1:4, 5mm thick finished to the portion of PCC muffs above ground level, complete all as specified and as directed by Engineer-in-Charge.

S&F for thermoplastic cable junction boxes IP 55/IP 65 with metric knockout for cable entry with terminal of size 240mmx130mmx95mm on pole with MS clamps, nut bolts, washers and glands suitable for 16/25 Sqmm 4 core cable, complete all as specified and directed.

S&F for 4 sqmm 3 core PVC insulated PVC sheathed weather proof multistranded aluminium conductor cable 1100 volts grade drawn through in GI conduit, pole etc with MS clamps from junction box to street light fitting, complete all as specified and directed.

Supply, Installation and Commissioning suitable size of LT Feeder Pillar Box Outdoor Type Factory made manufactured by a CPRI approved Manufacturer, made out of 3mm thick CRCA sheet and self supporting, built upon rigid frame work suitable for 440 Volt 3 Phase 4 wire system having front and rear hinged doors with neoprene rubber gasket, epoxy powder coated with danger plate, earthing strip point and bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc. having colour code aluminum bus bar inter connections for easy Identification including Incoming/Outgoing cable holes at bottom, provision of six nos connectors and embedded with Mild Steel Angle Iron frame of Size 50mmX50mmX6mm and 600mm above normal ground level complete with PCC foundation in PCC 1:2:4 type B1 (using 20mm graded stone aggregate) and testing after Instalation including taking down unserviceable Feeder Pillar box with connected accessories after disconnecting all Incoming and Outgoing Cables, etc., complete all as specified and comprising with the following :–

Contd......... (a) Aluminium Bus-bar 100 Amp, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The Bar shall be colour coded (Red, Yellow & Blue) for Three phases and black for neutral. – 04 Nos (b) MCCB, 4 pole, 40 Amps , rupturing capacity 10 KA adjustable thermal & fixd magnetic release - 01 Nos. (as incoming),

Supply and installation LT Electric control panel, cubical type, for out door use, dust & vermin proof floor mounted made out of CRCA steel sheet of 3.15 mm thick and 2.00 mm thick other parts and angle iron legs of size 50mmx50mmx6mm having front and rear hinged doors with front openable shutters for each MCCB with spreader & extended rotary handle having hinges on one side and locating arrangements with screws type on other sides completely with fully enclosed bus bar chamber, having electrolytic high conductivity insulated busbar made but of aluminium strips of rating 200 amps for 3 phase, 415 volts, 50 C/S 4 wire system, with cable entry provision, with suitable lugs gland, voltmeter , Ammeter and phase indicator complete, duly painted with two coats of stove enameled powder coated paint over as coat of red oxide primer complete all as including necessary PCC work of height 45cm from the ground level and equipped with the following items.

S&F for 25mm dia PVC pipe with all fitting from LT Pane box to DB with clamps, nuts & bolts, complete all as specified and directed.

S&F for MCB SPN 240 volts 6 to 32 Amps breaking capacity 10 KA 'C' Series rating, complete all as specified and directed.

S&F in repair MCB SP, 6 to 32 Amps, C series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc, complete all as specified and directed by Engineer-in-Charge.

S&F for sheet metal enclosure powder coated for MCB DB SPN 8 way Single door with din rail and bus bar including making good to the disurbed surface matching with the existing, complete all as specified and directed by Engineer-in-Charge.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

AGGARSAIN BUILDERS

M/S Shree Ram Enterprises

M/s JUGAL KISHORE MISHRA AND SONS

M/S VISHNU ENTERPRISES

H S BUILDERS